1965 DODGE POLARA light

THE SAFE WAY TO CHANGE A WHEEL
I Shut engine off and set parking brake. C. r should be parked on as flat a surface as possible. Block the wheel diagonally opposite to the one to be removed.
7 R move spare wheel. lack and base and IUR wrench from luggage compartment. See II lie ;>8for StatIOn Wagon lack storage.
Pry off hub cap With flat end of lug wrench.
" Loosen nuts (bolts) before uSing lack. I urn left on right wheels (passenger side) nd ueht on left wheels.
5. Place lifting hook on lack, uSing top hole for front bumper and bottom hole till r ,r bumper.
! II applicable, remove fender skirt If rear ",II I IS to be changed. Place hand under 111"'1'1 dge of skirt and push lock lever up 1111 way from you. Then pull skirt down for I IIIOV I.
I r I t lack hook between the two bump­r bolts and set lack In position with­lui I nling.
8. I nsert lug wrench In lack; set control finger for "Up" posllion and "pump" until wheelis clear of ground.
9 . Remove nuts (bolts) and pull wheel off hub.
10. Install spare and lightly tighten nuts (bolts), alternating from upper left to lower right and upper right to lower left . Set control finger for "Down" position and lower car. Then finish tightening. Put hub cap in place and hit sharply with heel of hand If rear wheel was changed, replace fender skirt (if applicable) by engaging retainer pins into holes in fender and push lock lever up to lock poslhon.
CAUTION: A bumper jack is a tire changing tool only! If It IS necessary to work under the car, place supports under car structure.

Qu ot, Safe, Sturdy Construction. That feeling of rock­ohd sturdiness you get in your new Dodge is built fight In. It's the result of a one-piece body and frame c II d Unlbody-rugged, light and fully protected from IU t by an exclusive seven·stop process. It's safer, too,
h cause i t surrounds you with steel girders.
I Smooth Comfort on the Roughest Road. As you drive, notice how your Dodge seems to glide over bumps and holes just as though they weren't there. Dodge is no exception. It gives you a remarkable combination of stability. control and smooth comfort for you and your family.
choose the ~iM.e6t COlLe..-for your new
Sure, Safe Stopp/ng Power. Dodge brakes give you completely predictable braking action, each and every stop. You'll also like the way you r new Dodge stops q uickly, surely, with very little pressure on the pedal. Big brake lining area means extra safety for you and your passengers, too.
33

SPECIFICATIONS, CAPACITIES AND DATA
License Data
Vehicle Number:
Stamped on plate on I It Ir nl d r I, visible when door IS op n .
Engine Number :
Stamped on boss und r d lIibulol
Fluid Capacities
Fuels-25 gals.; Station Wagoll
Engine Oil-4 qts., add 1 ql. with IiII r h 11M Cooling System-16 qts., dd 1 ql with hi ,II I
Transmissions-Manual 3 p d ~ III speed 7~ pi ., Automat I'M pi . Rear Axle-4 pts. Power Steering-4 pts.
Light Bulbs Number
It d Lights ower Light. ............................................................................... .. " 2 Upper Light .................................................................................... 1 In Irument Cluster ........................................................................ '" . . .. . . . 158 f r n smisslon Drive Selector. . . . . . .. .. .. . .. .. . .. . .. .. .. .. . . .. .. . .. .. . .. . .. .. • . .. . .. .. . .. .. . . .. . . . .... S3X II t r and/or Air Conditioning Controls. .. . . . . . . . . . . . . . . . . . . . . . .• . . . . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . .. 53X SWitch Tilles ....................................................................................... 53X R dlo 01 I......................................................................................... 1893 flunk ....................................................................................... 1004 Turn Signal, front and rear ... ....................................................................... 1034 P rking .......................................................................................... 1034 Dom .................................. _ ...................................................... 1004 LI nS8 Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 67 lOP nd Tail .................................. ... ................................................. 1034 13 k up ...................................................... .................. ........... ..... 1073
Engine Specifications 2·Barrel Carbo 4·Barrel Carbo 4 -Barrel Carbo 4 ·Barrel Carbo 383 cu. in. 383 cu. in. 413 cu. in. 426 cu. in.
Bor ... ...................... 4.25' 4.25' 4.19' 4.25' trok .................... '" 3.375' 3.375' 3.150' 3.750' Compr ssion Ratio ................ 9.2:1 10.0· 1 10.0:1 10.3:1 II rllter ....................... . Full Flow Spin On Full Flow Spin On Full Flow Spin On Full Flow Spin On oohng System Pressure .......... 14 psi 14 psi 14 psi 14 psi rh rmostal...................... 1SO° lS00 1SO° 1SO°
I nllion Timing ................... 10° BTC 10" BTC 10° BTC 10° BTC BI k r POlOt Gap ................. 014·.019' .014·.019' .014,.019' .014·.019' p rk Plug Gap and Number ........ 035', J -14-Y or .035', J ·14-Y or .035', J -I0·Y or .035', J-lO·Y or P -3 ·6P P -3 ·6P P -3 ·3P P -3 ·3P rllmg Order .................... 1·8·4·3·6·5-7·2 1·8 ·4 -3 ·6 ·5 ·7 ·2 1·8 ·4 ·3 -6 ·5 ·7·2 1·8·4·3 ·6 ·5 ·7·2 IILl • ........................ Relwlar Premium Prl!millm Prl>mium 41