2024 MAZDA CX90 rear light

How to Use the FullyAutomatic Climate Control System
(Operation from front seats)
1. Start the hybrid system.
2. Turn the front climate control system on.
3.
The indicator light turns on.
NOTE
When the rear climate control
system is turned on using the Rear
climate control system power
switch, each setting is the setting
before the rear climate control
system was turned off.
4.
The indicator light turns on and the
screen changes to the rear climate
control system operation screen.
5. Press the temperature setting switch to set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
The following switches cannot be
operated while the rear climate
control system operation screen is
displayed.
Air intake selector switchFront passenger’s side
temperature setting switch
A/C switchIf none of the following switches
are operated, the screen returns
to the front climate control
system operation screen after 10
seconds.
AUTO switchDriver’s side temperature
setting switch
SYNC (synchronized
temperature) switch
Mode selector switchFan control switch
6. To stop the operation, press the climate control system power
switch.

Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-19
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

(Operation from rear seats)
1. Start the hybrid system.
2.
3.
4. Press the temperature setting switchto set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
NOTE
The recommended set
temperature is 22 ℃(72 °F).
If mode selector switch or fan
control switch is operated during
auto operation, the AUTO switch
indicator light turns off.
If the AUTO switch is pressed
while the front A/C switch is off,
the rear air conditioner operates
only to circulate air.
5. To stop the operation, press the climate control system power
switch.
Operating Each Switch
AUTO switch
Automatically controlled according to
the set temperature.
Temperature setting switch
How to increase the set temperature
How to decrease the set temperature
NOTE
The set temperature changes in
increments of 0.5 ℃ within a range
of 15 ℃ (60 °F) and 29 ℃ (84 °F).
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-20
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The set temperature can be quickly
adjusted by pressing and holding the
temperature setting switch.
When the temperature is set to the
lower or upper limit, “Lo” or “Hi” is
displayed.
Mode selector switch
The desired airflow mode can be
selected.
The mode changes each time the
switch is pressed. The selected mode is
indicated on the display.
Fan control switch
How to increase the airflow amount
How to decrease the airflow amount
The
airflow amount changes each time
the switch is pressed. The airflow
amount is indicated on the display.
The airflow amount can be adjusted to
5 levels.
Climate control system power switch
(system on/off)
Switches the air conditioner on and
off.
The indicator light turns on while the
function is operating.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Rear)
6-21
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Sunvisor
When blocking light from the front
When blocking light from the side
Unhook the sunvisor and swing it to
the side.
The visor extender extends the
sunvisor's range of sun shading.
To u s e , p u l l i t o u t .
CAUTION
When moving the sunvisor, retract the
visor extender to its original position.
Otherwise, the visor extender could hit
the rearview mirror.
Other Equipment
Sunvisor
7-39
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
Overhead Lights
Front
The overhead lights turn on.
Press the
switch again to turn off
the overhead lights.
When the door interlock is ON
The indicator light in the switch
turns off.
The lights turn on when any of the
doors is opened.
The light turns on/off depending on
the illumination entry system.
When the door interlock is OFF
The indicator light in the switch turns
on.
Center
The center overhead lights also turns
on/off in conjunction with the
operation of the front overhead lights.
Ty p e A
Ty p e B
Rear
The rear overhead lights also turns
on/off in conjunction with the
operation of the front overhead lights.
Other Equipment
Interior Lights
7-42
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the MapLights
Front
The map light turns on.
Press the switch again to turn off the
map lights.
Rear
Ty p e A
Ty p e B
The map light turns on.
Press the switch again to turn off the
map lights.
NOTE
Pressing the switch does not turn the
lights off in any of the following
cases.
When the light is turned on by
operating an overhead light
switch.When the illuminated entry system
is operating.
(Rear)
Once the rear map lights have been
turned off, they will turn
on/off in
conjunction with the operation of an
overhead light switch.
Other Equipment
Interior Lights
7-43
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

TTW and GCWR
The total trailer weight (TTW), gross combination weight rating (GCWR), gross axle
weight rating (GAWR), trailer load, and trailer tongue load must be within the
prescribed limits.
The total trailer weight (TTW) is the sum of the weights of the trailer load (trailer
weight plus cargo). Never allow the total trailer weight (TTW) to exceed specifications in the Trailer towing-load table.
The maximum GCWR is the combination weight of the trailer and load plus the
towing vehicle (including trailer hitch, vehicle passengers, and load). It must not
exceed the specifications in the load table.
GAWR and GVWR
Do not exceed front and rear GAWR (gross axle weight rating) and GVWR (gross
vehicle weight rating). If you do, vehicle handling , braking , and performance will be
affected. These values are also on the Motor Vehicle Safety Standard Label posted
on the driver's door frame.
Trailer frontal area table
Frontal area is the total area that a moving vehicle and trailer exposes to air
resistance. Exceeding this limit may reduce the performance of your towing vehicle.
(U.S.A. and Canada)
Limitation items Limit values
MAX. FRONTAL AREA
2.79 m2 (30 ft2)
Before driving
Have your cooling and braking system checked by an Authorized Mazda Dealer.Before starting out, inspect the operation of all vehicle and trailer lights and all
vehicle-to-trailer connections. Stop and re-inspect all lights and connections after
driving a short distance.
Trailer hitch
Use only a hitch ball recommended by the trailer manufacturer that conforms to the
gross trailer weight requirement.
When not towing a trailer, remove the trailer hitch (if detachable) to reduce the
possibility of damage as a result of the vehicle being rear-ended.
Tires
When towing a trailer, make sure that the tire pressures of the rear tires are at 20
kPa (0.2 bar, 2.9 psi) higher than the recommended tire pressures indicated on
the tire pressure chart on the driver's door frame.
Other Equipment
Towing (U.S.A. and Canada)
7-64
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

If swaying occurs, firmly grip the steering wheel and reduce speed immediately, but
gradually.
Steer straight ahead. If no extreme correction of steering or braking is made, the
combination of less speed and firm steering will result in stability.
Backing up
Backing a vehicle with a trailer requires practice and patience. Back slowly, and have
a helper outside at the rear of the trailer to reduce the risk of an accident.
To turn the trailer, place your hand at th e bottom of the steering wheel and turn it in
the direction you want the trailer to go. Make only slight movements to prevent
sharp or prolonged turning.
Ascending a hill
Shift into a lower gear to reduce the poss ibility of overloading or overheating the
engine, or both.
Descending a hill
Shift into a lower gear and use engine compression as a braking effect.
Pa r k i n g
Always make sure the tires of the trailer and the tow vehicle are blocked while
parked.
Apply the parking brake firmly and put the transmission in P.
Avoid parking on an incline, but if you must, follow these instructions:
1. Depress and hold down the brake pedal.
2. Have a helper put wheel blocks against the downhill side of all vehicle and trailer tires.
3. Then release the brake pedal slowly until the blocks bear the load.
If the grade is downhill, turn the steering wheel so that the front of the front
tires face the curb.
If it is uphill, face the rear of the front tires against the curb.
4. Firmly apply the parking brake.
5. Shift the transmission into P, and stop the engine.
To restart after parking on an incline:
1. With the transmission in P, start the engine. (Be sure to depress and hold the brake pedal.)
2. Shift into gear.
3. Release the parking brake (also the foot brake) and pull away from the wheel blocks. Stop; apply the parking brake and shift into P.
4. Have a helper retrieve the wheel blocks.
Maintenance
If you tow a trailer frequently, have your vehicle serviced as shown in Scheduled
Maintenance (page 9-4).
Other Equipment
Towing (U.S.A. and Canada)
7-66
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04