2024 MAZDA CX90 is low

Any accessories which might
decrease the total seated weight on
the front passenger seat are attached
to the front passenger seat.
The front passenger front and side air
bags and knee air bags, and the seat
belt pretensioner system will
deactivate if the front passenger air
bag deactivation indicator light
illuminates.

Do not increase the total seated
weight on the front passenger seat.
When an infant or small child sits on
the front passenger seat, increasing the
total seated weight on the front
passenger seat is dangerous. The front
passenger seat weight sensors will
detect the increased total seated
weight, which could result in the
unexpected deployment of the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system in an accident and
may cause serious injury. Increasing the
total seated weight on the front
passenger seat could result in the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system deployment in an
accident under the following
conditions, for example.
 Luggage or other items are placed on
the seat with the child in the
child-restraint system.
 A rear passenger or luggage push or
pull down on the front passenger
seatback.
 A rear passenger steps on the front
passenger seat rails with their feet.
 Luggage or other items are placed on
the seatback or hung on the head
restraint.Heavy items are placed in the
seatback map pocket.
 The seat is washed.
 Liquids are spilled on the seat.
 The front passenger seat is moved
backward, pushing into luggage or
other items placed behind it.
 The front passenger seatback
contacts the rear seat.
 Luggage or other items are placed
between the front passenger seat
and driver seat.
 Any accessories which might increase
the total seated weight on the front
passenger seat are attached to the
front passenger seat.
CAUTION
To assure proper deployment of the
front air bag and to prevent damage
to the sensors in the front seat
bottoms.
 Do not place sharp objects on the
front seat bottoms or leave heavy
luggage on them.
 Do not spill any liquids on the
front seats or under the front seats.
 To allow the sensors to function
properly, always perform the
following.
 Adjust the front seats as far back as
possible and always sit upright
against the seatbacks with seat
belts worn properly.
 If you place your child on the front
passenger seat, secure the
child-restraint system properly and
slide the front passenger seat as far
back as possible (page 3-30).
Equipment to Protect Occupants/Pedestrians
SRS Air Bags
3-18
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the FrontPa s s e n g e r O cc u p a n t
Classification System
This system shuts off the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system, so make sure the
front passenger air bag deactivation
indicator light illuminates according to
the following table.
The air bag/seat belt pretensioner
system warning light turns on/flashes
and the front passenger air bag
deactivation indicator light illuminates
if the sensors have a possible
malfunction. If this happens, the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system will not deploy.
Front passenger air bag deactivation
indicator light
This indicator light illuminates to
remind you that the front passenger
front and side air bags and knee air
bags, and seat belt pretensioners will
not deploy during a collision.
If the front passenger weight sensors
are normal, the indicator light
illuminates when the vehicle power is
switched ON. The light turns off after a
few seconds. Then, the indicator light
illuminates or is
off under the following
conditions:
Front passenger air bag deactivation
indicator light on/off condition chart
Condition
detected by the
front pas-
senger oc-
cupant
classifica- tion sys- tem Front pas-
senger air
bag deacti-
vation indi- cator light Front pas-
senger
front and
side andknee air bags Front
passen-
ger seat
belt pre-
tensioner system
Empty
(Not occu-
pied) On
Deactivat-
ed Deacti-
vated
Child or
child-re-
straint sys-
tem
*1
On Deactivat-
ed Deacti-
vated
Adult
*2Off Ready Ready
*1 If a larger child sits on the front passenger seat, the sensors might detect the child as
being an adult depending on the child's
physique.
*2 If a smaller adult sits on the front passenger
seat, the sensors might detect the person as
being a child depending on the person's
physique.
The curtain air bag is ready for inflating
regardless of what the front passenger air bag
deactivation indicator light on/off condition
chart indicates.

If the front passenger air bag
deactivation indicator light does not
illuminate when the vehicle power is
switched ON and does not illuminate
as indicated in the front passenger air
bag deactivation indicator light on/off
condition chart, do not allow a child to
sit in the front passenger seat and
consult an Authorized Mazda Dealer
as soon as possible. The system may
not work properly in an accident.
Equipment to Protect Occupants/Pedestrians
SRS Air Bags
3-19
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Seat Belts
Seat belts help to decrease the
possibility of severe injury during
accidents and sudden stops. Mazda
recommends that the driver and all
passengers always wear seat belts.
All of the seat belt retractors are
designed to keep the lap/shoulder
belts out of the way when not in use.
The driver's seat belt has no provisions
for child-restraint systems and has only
an emergency locking mode. The
driver may wear it comfortably, and it
will lock during a collision.
However, the front passenger's seat
and all rear lap/shoulder belt
retractors operate in two modes:
emergency locking mode, and for
child-restraint systems, automatic
locking mode. While we recommend
you put all children in the rear seats, if
you must use the front passenger seat
for a child, slide the front passenger
seat as far back as possible and make
sure any child-restraint system is
secured properly.
ELR (emergency locking retractor)
system
When the seat belt is fastened, it will
always be in the emergency locking
mode.
In the emergency locking mode, the
belt remains comfortable on the
occupant and the retractor will lock in
position during a collision.
If the belt is locked and cannot be
pulled out, retract the belt once, and
then try pulling it out slowly. If this
fails, pull the belt strongly 1 time and
loosen, then pull it out again slowly.
When the seat belt is fastened, it will
always be in the emergency locking
mode until it is switched to automatic
locking mode by pulling it all the way
out to its full length. If the belt feels
tight and hinders comfortable
movement while the vehicle is stopped
or in motion, it may be in the
automatic locking mode because the
belt has been pulled too far out. To
return the belt to the more
comfortable emergency locking mode,
wait until the vehicle has stopped in a
safe, level area, retract the belt fully to
convert it back to emergency locking
mode and then extend it around you
again.
Automatic locking mode
Always use the automatic locking
mode to keep the child-restraint
system from shifting to an unsafe
position in the event of an accident. To
enable seat belt automatic locking
mode, pull it all the way out and
connect it as instructed on the
child-restraint system. It will retract
down to the child-restraint system and
stay locked on it. See the section on
child restraint (page 3-59).
Pretensioner system
If the vehicle receives a strong impact
from the front or side of the vehicle,
the system retracts the seat belts to
increase their effect.
When a collision is detected, the
pretensioners deploy simultaneously
with the air bags.
The seat belt retractor quickly removes
slack when an air bag is inflated.
The pretensioners deploy
simultaneously with the air bags when
a roll-over is also detected.
The seat belt retractors remove slack
quickly as the air bags are expanding.
Any time the air bags and seat belt
pretensioners have fired they must be
replaced.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-21
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

A system malfunction or operation
conditions are indicated by a warning.
Refer to Air Bag/Seat Belt Pretensioner
System Warning Light on page 8-47.
In addition, the pretensioner system
for the front passenger, like the front
and side passenger air bag, is designed
to only deploy in accordance with the
total seated weight on the front
passenger seat.
For details, refer to the front passenger
seat weight sensors (page 3-16).
Load limiting system
If the vehicle receives a strong impact
from the front of the vehicle, the load
limiting system operates to prevent the
seat belts from applying an excessive
load. By maintaining the load applied
to the seat belt to a specified level, the
system reduces impact to an
occupant's chest.
Even if the pretensioners have not
fired, the load limiting function must
be checked by an Authorized Mazda
Dealer.
NOTE
The pretensioner system operates if
the vehicle receives a strong impact
from the vehicle front or side
direction. The system may not
operate if the impact is weak.
Some smoke might be released
when the pretensioner system
operates, but this does not mean
there is a fire. This gas normally has
no effect on occupants. However,
those with sensitive skin may
experience light skin irritation. If
residue from the operation of the
pretensioner system gets on the skin
or in the eyes, wash it off as soon as
possible.
Warnings and Cautions
for Using the Seat Belts
WARNING
Always wear your seat belt and make
sure all occupants are properly
restrained.
Not wearing a seat belt is extremely
dangerous. During a collision,
occupants not wearing seat belts could
hit someone or things inside the
vehicle or even be thrown out of the
vehicle. They could be seriously injured
or even killed. In the same collision,
occupants wearing seat belts would be
much safer.

In a rollover crash, an unbelted person
is significantly more likely to die than a
person wearing a seat belt.

Do not wear twisted seat belts.
Twisted seat belts are dangerous. In a
collision, the full width of the belt is
not available to absorb the impact.
This puts more force on the bones
beneath the belt, which could cause
serious injury or death. So, if your seat
belt is twisted, you must straighten the
seat belt to remove any twists and to
allow the full width of the belt to be
used.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-22
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Never use one seat belt on more than
one person at a time.
Using one seat belt for more than one
person at a time is dangerous. A seat
belt used in this way cannot spread the
impact forces properly and the two
passengers could be crushed together
and seriously injured or even killed.
Never use one belt for more than one
person at a time and always operate
the vehicle with each occupant
properly restrained.
Do not operate a vehicle with a
damaged seat belt.
Using a damaged seat belt is
dangerous. An accident could damage
the belt webbing of the seat belt in
use. A damaged seat belt cannot
provide adequate protection in a
collision. Have an Authorized Mazda
Dealer inspect all seat belt systems in
use during an accident before they are
used again.
Have your seat belts changed
immediately if the pretensioner or
load limiter has been expended.
Always have an Authorized Mazda
Dealer immediately inspect the seat
belt pretensioners and air bags after
any collision. Like the air bags, the seat
belt pretensioners and load limiters
will only function once and must be
replaced after any collision that caused
them to deploy. A seat belt with an
expended pretensioner or load limiter
is still better than wearing no seat belt
at all; however, if the seat belt
pretensioners and load limiters are not
replaced, the risk of injury in a collision
will increase.
Positioning the Shoulder Portion of
the Seat Belt.Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder portion
of the seat belt is positioned across
your shoulder and near your neck, but
never under your arm, on your neck, or
on your upper arm.
Positioning the Lap Portion of the Seat
Belt.
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low as
possible.
Pregnant women and persons with a
medical condition should always wear
seat belts.
However, ask your doctor about
precautions in using a seat belt
because a strong impact might be
applied locally during sudden braking
or a collision. The lap portion of the
belt should fit the pelvis as low as
possible avoiding abdominal area. In
addition, the shoulder portion should
be positioned on the shoulder and
fitted to the chest avoiding the
abdominal area.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Wear seat belts only as recommended
in this owner's manual.
Incorrect positioning of the seat belts is
dangerous. Without proper
positioning, the pretensioner and load
limiting systems cannot provide
adequate protection in an accident
and this could result in serious injury.
For more details about wearing seat
belts, refer to "How to Use the Seat
Belts" (page 3-25).
Do not modify the components or
wiring, or use electronic testing
devices on the pretensioner system.
Modifying the components or wiring of
the pretensioner system, including the
use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable which
would prevent it from activating in an
accident. The occupants or person
making the modification could be
seriously injured.
Properly dispose of the pretensioner
system.
Improper disposal of the pretensioner
system or a vehicle with
non-deactivated pretensioners is
dangerous. Unless all safety
procedures are followed, injury could
result. Have an Authorized Mazda
Dealer safely dispose of the
pretensioner system or scrap a
pretensioner system equipped vehicle.CAUTION
Belt retraction may become difficult if
the belts and rings are soiled, so try to
keep them clean. For more details
about cleaning the seat belts, refer to
"Seat Belt Maintenance" (page
9-40).

1. Ring

Equipment to Protect Occupants/Pedestrians
Seat Belts
3-24
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

How to Use the Seat Belts
1. Sit back in the seat with your backupright.
2. Hold the plate and slowly pull out
the seat belt.
NOTE
If the belt is locked and cannot be
pulled out, retract the belt once,
and then try pulling it out slowly. If
this fails, pull the seat belt strongly
one time and loosen it, then pull it
out again slowly.
3. Make sure that the belt is not twisted.
4. Insert the plate into the buckle until it clicks.
5. The belt should fit the pelvis as lowas possible.
6. The belt should not touch the neck,jaw, or face and it should pass over
the shoulder.
Seat belt indicator light (second-row
seat/third-row seat) (green)
The indicator light may differ
depending on the specifications.
The light turns on when a second-row
seat belt/third-row seat belt is
fastened while the vehicle power is
switched ON, and it turns off after a
certain period.

Unfastening a Seat Belt

Make sure that the seat belt is not
twisted, then let the seat belt retract
slowly.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

To secure the outboard-third row seat
belts when not in use, insert the belts
into their seat belt retainers.
Adjusting the Seat Belt Height
If the seat belt contacts your neck or it
slips off the shoulder, adjust the seat
belt height.
To raise the seat belt
To lower the seat belt
1. Hold the seat belt anchor adjusterand press the knob down.
2. Make sure that the seat belt anchoradjuster is securely locked.
Seat Belt Extender
If your seat belt is not long enough,
even when fully extended, a seat belt
extender may be available to you at no
charge from your Authorized Mazda
Dealer.
This extender will be only for you and
for the particular vehicle and seat. Even
if it plugs into other seat belts, it may
not hold in the crit ical moment of a
crash.
When ordering an extender, only order
one that provides the necessary
additional length to fasten the seat belt
properly. Please contact your
Authorized Mazda Dealer for more
information.
NOTE
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left
connected, the seat belt extender
might get damaged as it will not retract
with the rest of the seat belt and can
easily fall out of the door when not in
use and be damaged. In addition, the
seat belt warning light will not
illuminate and function properly.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04