2024 MAZDA CX90 is low

Message Display
Displays a message to notify the user
of the system operation status and
malfunctions or abnormalities.
Follow the instructions indicated on
the display.
Refer to How to Use the Instrument
Cluster on page 5-28.
Driving
Instrument Cluster
5-42
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

Active Driving Display*
The active driving display indicates vehicle information and navigation information.
1. Front Cross Traffic Alert (FCTA) warning display area
2. Warning guidance display area
3. Blind Spot Monitoring (BSM) warning display area
4. i-ACTIVSENSE information display area
5. Vehicle speed display area and setting speed display area
6. Navigation information display area
NOTE
Wearing polarized sunglasses will reduce the visibility of the active driving display
due to the characteristics of the display.
If the lead-acid battery has been removed and re-installed or the lead-acid battery
voltage is low, the adjusted position may deviate.
The display may be difficult to view or temporarily affected by weather conditions
such as rain, snow, light, and temperature.
Driving
Active Driving Display
*Some models.5-43
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

Warning and Cautions forUsing the Selector Lever
WARNING
Always apply the parking brake when
the selector lever is in the P position.
When parking the vehicle, only shifting
the selector lever to the P position is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Do not move the selector lever from
the N or P position while the engine
speed is high.
Otherwise, the vehicle will move
suddenly which could lead to an
unexpected accident.
When operating the selector lever,
shift the selector lever with the brake
pedal firmly depressed and the
vehicle completely stopped.
Operating the selector lever while the
vehicle is moving could lead to an
unexpected accident.
Do not shift the selector lever with the
accelerator pedal depressed when the
selector lever is in the P or N position.
Always operate the selector lever with
the brake pedal depressed when the
selector lever is in the P or N position.
Otherwise, the vehicle will suddenly
accelerate which could lead to an
accident.
Do not shift the selector lever to the N
position while driving.
Otherwise, it could result in the loss of
the engine braking power and cause
an accident.
Do not depress the accelerator pedal
unnecessarily while the vehicle is
stopped.
If the accelerator pedal is mistakenly
depressed when the se lector lever is in
a position other than the P or N
position, the vehicle could suddenly
accelerate resulting in an accident.
After stopping the vehicle, check the
shift position indication in the
instrument cluster before
re-accelerating.
If the vehicle were to move
unexpectedly, it could lead to an
accident.
Do not allow the vehicle to move in
reverse on an upslope while the
selector lever is in forward drive, or
move forward on a downslope while
the selector lever is in reverse drive.
Otherwise, the engine could stop,
making the steering wheel difficult to
control, which could result in an
accident.
CAUTION
 When visually checking at the rear of
the vehicle while reversing the
vehicle, your body twists around to
the rear. Be careful and make sure
that the brake pedal can be firmly
depressed.
 Completely stop the vehicle before
shifting the select or lever to the P
position. If the selector lever is
shifted to P position before the
vehicle is completely stopped,
unnecessary force will be applied to
the transmission which could cause
damage.
Driving
Selector Lever
5-46
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

On roads with high driving resistance
such as deep-snowy or sandy roads,
or on steep slopes, a high load is
applied to the transmission, causing
excessive heat generation. Under
these driving conditions, pay
attention to the following points.
 Stop and hold the vehicle on a
steep slope with the brake pedal,
not the accelerator pedal. Do not
use the accelerator pedal to
prevent the vehicle from rolling.
 Avoid using the accelerator pedal
and the brake pedal at the same
time.
 Start driving the vehicle in the D or
R position according to the
direction of travel (avoid starting in
manual mode).
If you do not follow the above
precautions, the transmission may
overheat. If a message, such as
transmission cooling, is displayed, it
is necessary to temporarily stop the
vehicle to cool the transmission.How to Use the Selector Lever
Operating the Selector Lever
1. Start the hybrid system.
2. Operate the selector lever.
Selector lever
operation Operation condition
Shift from P
position to R position Depress the brake pedal and
press the selector lever button
to operate.
Shift from R
position to N position
Shift the lever without pressing
the selector lever button.
Shift from N
position to D
position
Shift from D
position to N position
Shift from N
position to R position Press the selector lever button
to shift the lever.
Shift from R
position to P
position
Driving
Selector Lever
5-47
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The shift indicator turns on at the
same position as the shift position
displayed in the instrument cluster.
1. Selector lever button
2. Shift indicator
The shift position is displayed in the
instrument cluster.
In the following cases, the shift
position is displayed in the
instrument cluster even if the
vehicle power is in a position other
than ON.
The AUTO P (parking lock)
function is operating.
Neutral hold mode is operating.
When the shift position and the
selector lever position differ, the
shift position and the selector lever
position are displayed.
1. Selector lever position
2. Shift position
NOTE
If the selector lever cannot be shifted
from the P position, the lead-acid
battery could be depleted.
When the selector lever is shifted
from the N position to the D/R
position without depressing the
brake pedal, the shift position and
the selector lever position differ,
however, the shift guide indication is
not displayed.
When the vehicle power is switched
from ON to ACC or OFF, the shift
guide indication displayed after
operating the AUTO P (parking lock)
function turns on for a certain period
of time and then it turns off.
Driving
Selector Lever
5-48
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Operating the AUTO P (Parking Lock)
Function
Meet the following conditions while
the vehicle is stopped.
Switch the vehicle power from ON to
OFF.
Unfasten the driver’s seat belt and
open the driver’s door while the shift
position is in the D/R position.
The AUTO P (parking lock) function
operates and the shift position
automatically changes to P.
NOTE
When the AUTO P (parking lock)
function operates, only the
transmission shift position changes to
the P position automatically. The shift
position indication in the instrument
cluster will differ from the selector
lever position because the selector
lever position does not change. Check
the shift position indication in the
instrument cluster and shift the
selector lever to the P position.
Using Neutral Hold Mode
When in neutral hold mode, a
condition is maintained for about 25
minutes in which the vehicle power is
switched to ACC, the shift position is
in the N position, and the parking
brake is released. Use this mode when
it is necessary to release the parking
brake and change the shift position to
the N position, such as in an automatic
car wash that moves the vehicle by
placing the front and rear tires on one
side of the vehicle on a belt conveyor.
Neutral Hold Mode activation method
1
1. Start the hybrid system.
2. Release the parking brake.
3. Shift the selector lever to the N position.
4. Turn off the AUTOHOLD.
5. Press the electric parking brake (EPB) switch continuously until a
sound is activated.
6. Press the power switch immediately after the sound is activated.
Neutral hold mode operates.
Neutral Hold Mode activation method
2
1. Start the hybrid system.
2. Release the parking brake.
3. Shift the selector lever to the N position.
4. Turn off the AUTOHOLD.
5. Press the power switch while pressing the electric parking brake
(EPB) switch.
Neutral hold mode operates.
Canceling Neutral Hold Mode
If any of the following operations is
performed, neutral hold mode is
canceled.
Switch the vehicle power ON.Shift the selector lever to the P
position.
NOTE
Neutral hold mode is canceled
automatically after about 25 minutes
have passed since it was operated, and
the vehicle power is switched OFF. At
this time, the AUTO P (parking lock)
function operates and the shift
position changes to the P position.
Driving
Selector Lever
5-49
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
If the automatic transmission fluid (ATF) temperature becomes too high, the mode
will not switch to direct mode. In addition, if the ATF temperature becomes too
high while in direct mode, the mode may be canceled. If the mode is switched to
direct mode again, it is necessary to operate the steering shift switches.
While the vehicle is stopped, direct mode cannot be set even if the DOWN switch
(-) is pulled.
When fully depressing the accelerator pedal even while in direct mode, the
transmission kicks down, bu t it does not kick down while the Traction Control
System (TCS) is turned off. However, if th e vehicle is continuously driven at a high
rpm, the gears may automatically shift up to protect the engine.
When the vehicle is driven at low speed or decelerating quickly during EV driving,
the mode may not be able to be switched to direct mode using the UP switch (+/
OFF) of the steering shift switches.
If NORMAL mode is in use while the motor is running, operating the steering shift
switches will start the engine.
When operating a steering switch while the Mazda intelligent Drive Select
(Mi-Drive) is in EV mode, the engine st arts and the mode switches from EV mode
to NORMAL mode.
Canceling Direct Mode
Direct mode can be canceled by performing the following operations.
The UP switch (+/OFF) is pulled toward you for a certain period of time or longer.The vehicle is driven for a certain period of time or longer (time differs depending
on the driving conditions while operating).
The vehicle is stopped.The vehicle is driven at a low speed.
Using Manual Shift Mode
1. Select manual shift mode (M) from AT shift modes under Settings in Mazda
Connect.
2. Pull the up switch (+/OFF) or the down switch (-) of the steering shift switches toward you when the selector lever is in the D position.
1. Down switch (-)
2. Up switch (+/OFF)
The gear position can be switched manually in manual shift mode.
Driving
Steering Shift Switches
5-52
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Shifting up/down
Pull the up switch (+/OFF) or the down switch (-) of the steering shift switches
toward you.
1. Down switch (-)
2. Up switch (+/OFF)
Shifts up or down.
NOTE
If the automatic transmission fluid (ATF) temperature becomes too high, the mode
will not switch to manual shift mode. In addition, if the ATF temperature becomes
too high while in manual shift mode, the mode may be canceled. If the mode is
switched to manual shift mode again, it is necessary to operate the steering shift
switches.
When fully depressing the accelerator pedal even while in manual mode, the
transmission kicks down, but it does not kick down while the Traction Control
System (TCS) is turned off. However, if the vehicle is continuously driven at a high
rpm, the gears may automatically shift up to protect the engine.
When the vehicle is driven at low speed or decelerating quickly during EV driving,
the mode may not be able to be switched to manual shift mode using the UP
switch (+/OFF) of the steering shift switches.
If NORMAL mode is in use while the moto r is running, operating the steering shift
switches will start the engine.
When operating a steering switch while the Mazda intelligent Drive Select
(Mi-Drive) is in EV mode, the engine starts and the mode switches from EV mode
to NORMAL mode.
Canceling Manual Shift Mode
The UP switch (+/OFF) of the steering shift switches is pulled and held for a certain
period of time or longer.
Manual shift mode is canceled.
Driving
Steering Shift Switches
5-53
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04