2023 TOYOTA RAIZE lock

1924-2. Driving procedures
RAIZE_OM_General_BZ358E
✽: If equipped
d
Press the shift lock release button
using a tool such as a flathead
screwdriver
The shift lever can be shifted while
the button is pressed.
To prevent damage, wrap a cloth
around the tip of the flathead screw-
driver or the like to protect it.
⬛Situations where automatic shif ting occurs in the manual mode
⚫In the manual mode, the gear does not shift unless the driver moves the
shift lever or the paddle shift switch
✽. However, in the following circum-
stances, the system will automatically shift the gears to ensure safety and
maintain driving performance.
⦁ When the vehicle speed has decrease d or increased (The temporary man-
ual mode
✽ may become deactivated)
⚫When the vehicle stops, the transmission is automatically set to the 1-speed
position. (The temporary manual mode
✽ will be deactivated)
⬛Continuous gear transmis sion in the manual mode
⚫Move the shift lever or paddle shift switch to the ✽“+” side or “-” side repeat-
edly. With the shift lever being operated on the “+” side or “-” side, the shift
position cannot be changed continuously.
⬛Shift limit warning buzzer (in manual mode)
Shifting in the manual mode is limited. Th e gear cannot be shifted to the desired
position in some cases. The warning buzzer w ill notify the driver of this if it happens.
⬛Automatic deactivation of the temporary manual mode✽
In any of the following situations, the temporary manual mode will be automat-
ically deactivated.
⚫When stopping the vehicle
⚫When continuing to step on the accelerator pedal at the same shift position
for a certain period
⚫When stepping on the accelerator pedal deeply
⚫When the shift lever is set in other than D
⚫When keeping holding the “+” side of the paddle shift switch for a certain period
KBRO420302E
RAIZE_OM_General_BZ358E.book 192 ページ ２０２２年５月１７日　火曜日　午後１時５９分

1934-2. Driving procedures
RAIZE_OM_General_BZ358E
✽: If equipped
Driving
4
⬛Power mode✽
⚫The power mode control will not be acti vated in any of the following situa-
tions:
⦁ When the shift lever is set to R
⚫Even when you have set the D assist switching steering switch to “ON”, turn-
ing the engine switch “OFF ” and turning it “ON” will automatically restore the
D assist switching steering switch to “OFF”.
⚫When the malfunction indicator lamp or the continuously variable transmis-
sion warning light
✽ is lit or flashing, or when the TFT color multi-information
display
✽ shows “Transmission System Malfun ction”, the vehicle will not enter
the power mode.
⬛Reverse warning buzzer
When shifting into R, a buzzer will so und to inform the driver that the shift
lever is in R.
WARNING
⬛When driving on slippery road surfaces
Do not accelerate or shift gears sudde nly. Sudden changes in engine braking
may cause the vehicle to spin or skid.
⬛To prevent an accident when releasing the shift lock
Before pressing the shift lock override button, make sure to set the parking
brake and depress the brake pedal.
If the accelerator pedal is accidentally depressed instead of the brake pedal
when the shift lock override button is pr essed and the shift lever is shifted out
of P, the vehicle may suddenly start, po ssibly leading to an accident resulting in
death or serious injury.
RAIZE_OM_General_BZ358E.book 193 ページ ２０２２年５月１７日　火曜日　午後１時５９分

1994-3. Operating the lights and windshield wipers
RAIZE_OM_General_BZ358E✽
: If equipped
Driving
4
Follow me home system✽
This system allows the headlights to be turned on for 30 seconds when
the engine switch is turned off.
Pull the lever toward you and
release it with the light switch
in after turning the engine switch
off.
The lights are turned off in the following
situations.
⦁ The engine switch is turned to “ON”.
⦁ The light switch is turned on.
⦁ The light switch is pulled toward you
and then released.
⬛Daytime running light system✽
To make your vehicle more visible to ot her drivers during daytime driving, the
daytime running lights turn on automatically whenever the engine is started
and the parking brake is released wi th the headlight switch in the or
* position. (Illuminate brighter than the front position lights.) Daytime
running lights are not designed for use at night.
*When the front position lights are not turned on
⬛Light sensor✽
⚫Observe the following precautions.
Failure to do so may prevent the
automatic light on/off function from
working normally.
⦁ Avoid placing any item on the
sensor or pasting items that
would block the sensor on the
windshield
⦁ Do not spray liquid including
glass cleaner
KBRO430103E
KBRO430104E
Light sensor
(with solar radiation sensor)
RAIZE_OM_General_BZ358E.book 199 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2134-5. Using the driving support systems
RAIZE_OM_General_BZ358E
Driving
4
How to set up
Go to the “Settings” menu on the TFT color multi-information display, you
can change the settings of BSM function/RCTA function ON (enabled)/OFF
(disabled). (➞P. 109)
⬛Visibility of the outside rear view mirror indicators
⚫It may be difficult to see if the outsid e rear view mirror indicators are lit or
flashing in the following cases:
⦁ Under strong sunlight
⦁ The outside rear view mirrors are covered with ice or snow
⬛Buzzers
⚫It may be difficult to hear the buzzers if there is a loud noise around, such as
high volume audio.
⬛When the TFT color multi-information display shows “BSM Radar Blocked
Temporarily Unavailable”
It is possible that the rear bumper near the sensors is covered with ice, snow,
or mud. If you remove the ice, snow, or mud covering the rear bumper near
the sensors, the function will start working normally again.
⬛When the TFT color multi-information display shows “BSM Temporary
Unavailable”
If you use the function in an extremely hot or cold environment or if the bat-
tery voltage is lower or higher than th e specified level, the system operation
will be temporarily stopped. If the BSM OFF indicator or the RCTA OFF indicator
remains lit for a long time, have the vehi cle inspected at your Toyota dealer.
⬛When the TFT color multi-information display shows “BSM Malfunction
Visit Your Dealer”
It is possible that the sensors have failed or their positions or orientations are
off. Have the vehicle inspec ted at your Toyota dealer.
⬛Customizations
The BSM and RCTA settings can be changed.
(List of customizable features: ➞ P. 430)
(The settings can be changed from the setup screen of the TFT color multi-
information display: ➞ P. 104)
RAIZE_OM_General_BZ358E.book 213 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2314-5. Using the driving support systems
RAIZE_OM_General_BZ358E
Driving
4
NOTICE
⬛Camera handling
⚫Be careful with the following since they could cause the rear-view camera to
malfunction.
⦁Do not install any item around the camera, which could interfere with the
camera’s field of view (such as an item blocking the view or light-emitting
objects, items made of shiny materials).
⦁ Do not apply strong impact to the ca mera unit, such as hitting it hard or
bumping it against another object. Doing so could cause the camera posi-
tion or mounting angle to be deviated.
⦁ The camera unit has a waterproof structure. Do not remove, disassemble
or alter it.
⦁ When you wash the camera lens, use water to wash the dirt off from the
camera and wipe it off with a so ft cloth dampened with water.
If you rub the camera lens too hard, it could scratch the camera lens, and
you will not be able to see clear images.
⦁ The camera’s cover is made of resin. Do not allow organic solvents, body
wax, oil film remover, and glass coating agent to get attached to it. If they
get attached, wipe it off immediately.
⦁ Do not expose it to rapid temperature changes, such as by pouring hot
water over it in cold weather.
⦁ Do not splash water directly to the camera or areas around the camera
using a high-pressure washer during a car wash. The high water pressure
adds stress and may prevent the system from working properly.
⚫Applying shock to the camera unit may cause the camera to malfunction.
Have the vehicle inspected at your Toyo ta dealer in your earliest conveni-
ence.
RAIZE_OM_General_BZ358E.book 231 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2324-5. Using the driving support systems
RAIZE_OM_General_BZ358E
Driving assist systems
The following devices automatically operate according to the driving
conditions to improve driving safety and performance. However,
these systems are supplementary and you should be careful not to
over-rely on them while driving.
◆ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the brakes are applied suddenly, or if
the brakes are applied while driving on a slippery road surface.
◆Brake assist
Generates an increased level of braking force when the system detects a
panic stop situation.
◆VSC (Vehicle Stability Control)
Helps the driver to control skidding when swerving suddenly or turning on
slippery road surfaces.
◆TRC (Traction Control)
Helps to maintain drive power and pr event the drive wheels from spinning
when starting the vehicle or accelerating on slippery roads.
◆Hill-start assist control
Prevents the vehicle from moving backwards when starting on an uphill.
◆EPS (Electric Power Steering)
Uses an electric motor to assist steering operation.
◆Emergency brake signal
Emergency flashers automatically fl ash when braking suddenly, alerting
the following vehicle and reducing the possibility of a collision.
RAIZE_OM_General_BZ358E.book 232 ページ ２０２２年５月１７日　火曜日　午後１時５９分

238
RAIZE_OM_General_BZ358E
4-6. Driving tips
Winter driving tips
Carry out the necessary preparations and inspections before driving
the vehicle in winter. Always drive the vehicle in a manner appropri-
ate to the prevailing weather conditions.Preparation for winter
⚫Use fluids that are appropriate to the prevailing outside temperatures.
⦁ Engine oil
⦁ Coolant
⦁ Washer fluid
⚫Have a service technician inspec t the condition of the battery.
Before driving
Perform the following according to the driving conditions:
⚫Do not try to forcibly open a window or move a windshield wiper that is
frozen. Pour warm water over the frozen area to melt the ice. Wipe away
the water immediately to prevent it from freezing.
⚫To ensure proper operation of the air conditioning system fan, remove
any snow that has accumulated on the air inlet vents in front of the
windshield.
⚫Check for and remove any excess ice or snow that may have accumu-
lated on the exterior lights, vehicle’s roof, around the tires or on the
brakes.
⚫Look under the vehicle and check that there are no ice blocks around
the ground. Remove any attached ice blocks with great care to avoid
damaging vehicle components. Also check that the pedals and steering
wheel move smoothly.
⚫Remove any snow or mud from the bottom of your shoes before getting
in the vehicle.
RAIZE_OM_General_BZ358E.book 238 ページ ２０２２年５月１７日　火曜日　午後１時５９分

2394-6. Driving tips
RAIZE_OM_General_BZ358E
Driving
4
When driving the vehicle
⚫Accelerate the vehicle slowly, keep a safe distance between you and the
vehicle ahead, and drive at a reduced speed suitable to road conditions.
⚫During snowfall or cold weather, water adhering to the brake system
may freeze, and the brakes may become less effective. If brake perfor-
mance is poor, paying close attention to the surrounding safety, lightly
depress the brake pedal several times to confirm that the brakes work
properly until their effectiveness is restored.
⚫When driving on snowy roads, snow attached to the back of the wheel
wells freezes and may grad ually accumulate, making it difficult to steer.
Check that there is no abnormal build-up of snow from time to time. The
lights may become dark due to snow during driving, so make sure that
there is no abnormal build-up of snow from time to time.
When parking the vehicle
⚫The parking brake may freeze up, preventing it from being released. For
continuously variable transmission vehicles, set the shift lever to P. For
the manual transmission vehicles, set the shift lever to R on a downhill,
and set it to the gear 1 on an uphill to park. Do not apply the parking
brake at this time, and make sure to use wheel chocks.
Failure to do so may be dangerous because it may cause the vehicle to
move unexpectedly, possibly leading to an unforeseen accident.
⚫When you park the continuously variable transmission vehicle without
applying the parking brake, confirm that the shift lever will not move*
with the shift lever being placed in P.
*The shift lever will be locked if it is attempted to be shifted from P to any other
position without depressing the brake pe dal. If the shift lever can be shifted,
there may be a problem with the shift lo ck system. Have the vehicle inspected at
your Toyota dealer immediately.
RAIZE_OM_General_BZ358E.book 239 ページ ２０２２年５月１７日　火曜日　午後１時５９分