2023 TOYOTA MIRAI wipers

3TABLE OF CONTENTS
Owners Manual_USA_M62064_en
1
2
3
4
5
6
8 7
9
10
4-4. Adjusting the steering wheel and mirrors
Steering wheel .............. 147
Inside rear view mirror .. 149
Digital Rear-view Mirror 150
Outside rear view mirrors .................................... 160
4-5. Opening, closing the win- dows
Power windows ............. 162
4-6. Favorite settings My Settings ................... 165
5-1. Before driving Driving the vehicle......... 169
Cargo and luggage ....... 175
Vehicle load limits ......... 178
Trailer towing................. 179
Dinghy towing ............... 179
5-2. Driving procedures Power switch ................. 180
Shift position ................. 185
Turn signal lever............ 190
Parking brake ................ 191
Brake Hold .................... 194
ASC (Active Sound Control) .................................... 196
Water release (H
2O switch)
.................................... 1965-3. Operating the lights and
wipers
Headlight switch ............ 198
AHB (Automatic High Beam) .................................... 200
Windshield wipers and washer ......................... 204
5-4. Refueling Opening the fuel door .... 210
5-5. Using the driving support systems
Toyota Safety Sense 2.5 +
.................................... 214
PCS (Pre-Collision System) .................................... 219
LTA (Lane Tracing Assist) .................................... 230
RSA (Road Sign Assist). 241
Dynamic radar cruise control with full-speed range ... 244
BSM (Blind Spot Monitor) .................................... 256
Intuitive parking assist ... 261
RCTA (Rear Cross Traffic Alert) ............................ 272
RCD (Rear Camera Detec- tion) ............................. 277
PKSB (Parking Support Brake) .......................... 281
Parking Support Brake func- tion (static obj ects front and
rear of the vehicle/static
objects around the vehicle) .................................... 286
Parking Support Brake func- tion (moving vehicle rear of
the vehicle) .................. 290
5Driving

15Pictorial index
Owners Manual_USA_M62064_en
Windshield wipers.............................................. ................ P.204
Precautions for winter seas on.............................................. P.327
To prevent freezing (windshield wiper de-icer)
*............ P.337, 347
Precautions for car wash (vehicles with rain-sensing windshield wip-
ers) ....................................................................................... P.394
Fuel door ...................................................... ....................... P.210
Refueling method ............................................... .................. P.210
Fuel type/hydrogen t anks’ fuel capacity ........................ ....... P.497
Tires.......................................................... ........................... P.416
Tire size/inflation pressure ................................... ........ P.416, 501
Winter tires/tire chains ....................................... .................. P.327
Checking/rotation/tire pressur e warning system ..................P.416
Coping with flat tires......................................... .................... P.467
Hood ........................................................... ......................... P.406
Opening ............................................................................... P.406
Fuel cell unit compartment cover ............................... .......... P.409
Coping with overheating ...................................................... P.490
Warning messages ............................................... ............... P.464
Headlights/daytime running lights
*.................................. P.198
Parking lights/dayt ime running lights
*............................. P.198
Turn signal lights ............................................. .................. P.190
Tail lights.................................................... ......................... P.198
Tail lights.................................................... ......................... P.198
Stop lights
License plate lights........................................... ................. P.198
Back-up lights
Changing the shift position to R ............................... ............ P.185
Light bulbs of the exterior lights for driving
(Replacing method: P.443)

167
Owners Manual_USA_M62064_en
5
5
Driving
Driving
5-1. Before drivingDriving the vehicle....... 169
Cargo and luggage ..... 175
Vehicle load limits ....... 178
Trailer towing............... 179
Dinghy towing ............. 179
5-2. Driving procedures Power switch ............... 180
Shift position ............... 185
Turn signal lever.......... 190
Parking brake .............. 191
Brake Hold .................. 194
ASC (Active Sound Control) .................................. 196
Water release (H
2O switch)
.................................. 196
5-3. Operating the lights and wipers
Headlight switch .......... 198
AHB (Automatic High Beam)........................ 200
Windshield wipers and washer....................... 204
5-4. Refueling Opening the fuel door . 2105-5. Using the dr
iving support
systems
Toyota Safety Sense 2.5 + .................................. 214
PCS (Pre-Collision System) .................................. 219
LTA (Lane Tracing Assist) .................................. 230
RSA (Road Sign Assist) .................................. 241
Dynamic radar cruise con- trol with full-speed range
.................................. 244
BSM (Blind Spot Monitor) .................................. 256
Intuitive parking assist . 261
RCTA (Rear Cross Traffic Alert) .......................... 272
RCD (Rear Camera Detec- tion) ........................... 277
PKSB (Parking Support Brake) ........................ 281
Parking Support Brake func- tion (static objects front
and rear of the vehi-
cle/static objects around
the vehicle) ................ 286
Parking Support Brake func- tion (moving vehicle rear of
the vehicle) ................ 290
Parking Support Brake func- tion (pedestrians rear of
the vehicle) ................ 291

1985-3. Operating the lights and wipers
Owners Manual_USA_M62064_en
5-3.Operating the lights and wipers
Operating the switch
turns on the lights as follows:U.S.A.
Canada
1 The side marker, parking,
tail, license plate, instrument
panel lights, and daytime run-
ning lights ( P.198) turn on.
2 The headlights and all
lights listed above (except
daytime running lights) turn
on.
3 The headlights, daytime
running lights ( P.198) and all the lights listed above turn
on and off automatically.
4 (if equipped) Off
■AUTO mode can be used when
The power switch is in ON.
■Daytime running light system
●The daytime runn ing lights illumi-
nate using the same lights as the
parking lights and illuminate
brighter than the parking lights.
(On some models: Using the
same lights as the headlights but
at a lower intensity.)
●To make your vehicle more visible
to other drivers during daytime
driving, the daytime running lights
turn on automatically when all of
the following conditions are met.
(The daytime running lights are
not designed for use at night.)
• The fuel cell system is operating
• The parking brake is released
• The headlight switch is in the
or
* position
*: When the surroundings are bright
●The daytime running lights remain
on after they illuminate, even if the
parking brake is set again.
●For the U.S.A.: Daytime running
lights can be turned off by operat-
ing the switch.
●Compared to turning on the head-
lights, the daytime running light
system offers greater durability
and consumes less electricity, so
it can help improve fuel economy.
Headlight switch
The headlights can be oper-
ated manually or automati-
cally.
Operating instructions

1995-3. Operating the lights and wipers
Owners Manual_USA_M62064_en
5
Driving
■Headlight control sensor
The sensor may not function prop-
erly if an object is placed on the sen-
sor, or anything that blocks the
sensor is affixed to the windshield.
Doing so interfere s with the sensor
detecting the level of ambient light
and may cause the automatic head-
light system to malfunction.
■Automatic light off system
●When the headlights are on: The
headlights and tail lights turn off
30 seconds after the driver’s door
is opened and clos ed if the power
switch is turned to ACC or off.
(The lights turn off immediately if
on the key is pressed after all
the doors are closed.)
●When only the tail lights are on:
The tail lights tu rn off automati-
cally if the power switch is turned
to ACC or off and the driver’s door
is opened.
To turn the lights on again, turn the
power switch to ON, or turn the light
switch off once and then back to
or .
■Light reminder buzzer
A buzzer sounds when the power
switch is turned off or turned to ACC
and the driver’s door is opened
while the lights are turned on.
■Automatic headlight leveling
system (if equipped)
The level of the headlights is auto-
matically adjusted according to the
number of passengers and the load-
ing condition of the vehicle to ensure that the headlights do not
interfere with other road users.
■Windshield wiper linked head-
light illumination
When driving during daytime with
the headlight switch turned to , if
the windshield wipers are used, the
headlights will turn o n automatically
after several seconds to help
enhance the visibility of your vehi-
cle.
■12-volt battery-saving function
In order to prevent the 12-volt bat-
tery of the vehicle from discharging,
if the headlights and/or tail lights are
on when the power switch is turned
off the 12-volt battery saving func-
tion will operate and automatically
turn off all the lig hts after approxi-
mately 20 minutes. When the power
switch is turned to ON, the 12-volt
battery-saving function will be dis-
abled.
When any of the following are per-
formed, the 12-volt battery-saving
function is canceled once and then
reactivated. All the lights will turn off
automatically 20 minutes after the
12-volt battery-saving function has
been reactivated:
●When the headlight switch is oper-
ated
●When a door or the trunk is
opened or closed
■Customization
Some functions can be customized.
(  P.512)
NOTICE
■To prevent 12-volt battery dis-
charge
Do not leave the lights on longer
than necessary when the fuel cell
system is off.

2005-3. Operating the lights and wipers
Owners Manual_USA_M62064_en
1With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
2Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with
the headlights on or off.
1Press the Automatic High
Beam switch.
Turning on the high beam
headlightsAHB (Automatic High
Beam)
The Automatic High Beam
uses a front camera located
behind the upper portion of
the windshield to assess the
brightness of the lights of
vehicles ahead, street-
lights, etc., and automati-
cally turns the high beams
on or off as necessary.
WARNING
■Limitations of the Automatic
High Beam
Do not overly rely on the Auto-
matic High Beam. Always drive
safely, taking care to observe your
surroundings and turning the high
beams on or off manually if nec-
essary.
■To prevent inc orrect opera-
tion of the Automatic High
Beam system
Do not overload the vehicle.
Activating the Automatic
High Beam

2015-3. Operating the lights and wipers
Owners Manual_USA_M62064_en
5
Driving
2 Turn the headlight switch to
the or position.
When the headlight switch lever is
in the low beam position, the AHB
system will be enabled and the
AHB indicator will illuminate.
■Conditions to t urn the high
beams on/off automatically
●When all of the following condi-
tions are met, the high beams will
be turned on automatically (after
approximately 1 second):
• The vehicle speed is approxi-
mately 21 mph (34 km/h) or more.
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with headlights or tail lights turned on.
• There are few streetlights on the
road ahead.
●If any of the following conditions
are met, the high beams will turn
off automatically:
• The vehicle speed is below
approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Vehicles ahead have their head- lights or tail lights turned on.
• There are many streetlights on the
road ahead.
■Front camera detection infor-
mation
●The high beams may not be auto-
matically turned off in the following
situations:
• When a vehicle suddenly appears from around a curve
• When the vehicle is cut in front of by another vehicle
• When vehicles ahead cannot be detected due to repeated curves,
road dividers or roadside trees
• When vehicles ahead appear in a faraway lane on a wide road
• When the lights of vehicles ahead
are not on
●The high beams may be turned off
if a vehicle ahead that is using fog
lights without its headlights turned
on is detected.
●House lights, street lights, traffic
signals, and illuminated billboards
or signs and other reflective
objects may cause the high
beams to change to the low
beams, or the low beams to
remain on.
●The following fact ors may affect
the amount of time taken for the
high beams to turn on or off:
• The brightness of the headlights, fog lights, and ta il lights of vehi-
cles ahead
• The movement and direction of vehicles ahead
• When a vehicle ahead only has
operational lights on one side
• When a vehicle ahead is a two- wheeled vehicle
• The condition of the road (gradi- ent, curve, condition of the road
surface, etc.)
• The number of passengers and amount of luggage in the vehicle
●The high beams may turn on or off
unexpectedly.
●Bicycles or similar vehicles may
not be detected.
●In the following situations the sys-
tem may not be able to correctly
detect the surrounding brightness
level. This may cause the low
beams to remain on or the high
beams to flash or dazzle pedestri-
ans or vehicles ahead. In such a
case, it is necessary to manually
switch between the high and low
beams.

2025-3. Operating the lights and wipers
Owners Manual_USA_M62064_en• When driving in inclement weather
(heavy rain, snow, fog, sand-
storms, etc.)
• When the windshield is obscured by fog, mist, ice, dirt, etc.
• When the windshield is cracked or
damaged
• When the front camera is deformed or dirty
• When the temperature of the front camera is extremely high
• When the surrounding brightness
level is equal to that of headlights,
tail lights or fog lights
• When headlights or tail lights of
vehicles ahead are turned off,
dirty, changing color, or not aimed
properly
• When the vehicle is hit by water, snow, dust, etc., from a preceding
vehicle
• When driving thr ough an area of
intermittently changing brightness
and darkness
• When frequently and repeatedly driving ascending/descending
roads, or roads with rough, bumpy
or uneven surfaces (such as
stone-paved roads, gravel roads,
etc.)
• When frequently and repeatedly taking curves or driving on a wind-
ing road
• When there is a hi ghly reflective
object ahead of th e vehicle, such
as a sign or mirror
• When the back of a preceding vehicle is highly reflective, such as
a container on a truck
• When the vehicle’s headlights are damaged or dirty, or are not aimed
properly
• When the vehicle is listing or titling due to a flat tire, a trailer being
towed, etc.
• When the headlights are changed between the high beams and low
beams repeatedly in an abnormal
manner
• When the driver believes that the high beams may be flashing or
dazzling pedestrians or other driv-
ers
■Temporarily lowering sensor
sensitivity
The sensitivity of the sensor can be
temporarily lowered.
1 Turn the power s witch off while
the following conditions are met.
●The headlight switch is in or
.
●The headlight switch lever is in
low beam position.
●Automatic High Beam switch is
on.
2 Turn the power switch to ON.
3 Within 60 seconds after step 2,
repeat pushing the headlight
switch lever to the high beam
position then pulling it to the orig-
inal position quickly 10 times,
then leave the lever in the origi-
nal position.
4 If the sensitivity is changed, the
AHB indicator is turn on and off 3
times.
■Switching to the high
beams
Push the lever away from you.
The AHB indicator will turn off and
the high beam indi cator will turn on.
Pull the lever to its original position
to activate the Automatic High
Beam system.
Turning the high beams
on/off manually