2023 MAZDA CX9 ignition

[x] Cancel search: ignition

Page 555 of 739

MAZDA CX9 2023  Owners Manual WA R N I N G
Do not perform maintenance work if you lack sufficient knowledge and experience or the
proper tools and equipment to do the work. Have maintenance work done by a qualified
technician:
Per

Page 561 of 739

MAZDA CX9 2023  Owners Manual Engine Coolant
▼Inspecting Coolant Level
WA R N I N G
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:
A hot engine is dangerous. If the engine

Page 564 of 739

MAZDA CX9 2023  Owners Manual Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should be
lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weath

Page 580 of 739

MAZDA CX9 2023  Owners Manual CAUTION
When removing the lens or lamp unit using a flathead screwdriver, make sure that the
flathead screwdriver does not contact the int erior terminal. If the flathead screwdriver
contacts the term

Page 582 of 739

MAZDA CX9 2023  Owners Manual Parking lights/Front side-marker
lights
 
8. Install the new bulb in the reverse
order of the removal procedure.
NOTE
There will be no problem with
functionality with the wiring harness
disconnected i

Page 583 of 739

MAZDA CX9 2023  Owners Manual 6. Turn the socket and bulb assemblycounterclockwise and remove it.
 
7. Temporarily install the light unit withthe socket pulled out of the top of the
light unit.
 
Socket pull-out range
CAUTION
T

Page 587 of 739

MAZDA CX9 2023  Owners Manual CAUTION
When replacing the bulb always
disconnect the connector first.
Otherwise, electric and electronic
devices could be shorted.
3. Insert the flathead screwdriver into the gap between the lens and

Page 588 of 739

MAZDA CX9 2023  Owners Manual 3. Pull the fuse straight out with the fusepuller provided on the fuse block
located in the eng ine compartment.
4. Inspect the fuse and replace it if it is
blown.
Normal Blown
5. Insert a new fu
se o