31
IS500_IS350_IS300_QG_U
■Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its orig inal position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually
88
What to do if...
IS500_IS350_IS300_QG_U
See the “OWNER’S MANUAL”
Turn signal indicatorRCTA OFF indicator
Headlight indicator (U.S.A.)PKSB OFF indicator
(if equipped)
Tail light indicator (Canada)
(flashes)
Slip indicator
Headlight high beam indicatorVSC OFF indicator
Automatic High Beam
indicatorSmart access system with
push-button start indicator
PCS warning light(U.S.A.)Parking brake
indicator
Cruise control indicator(Canada)
Dynamic radar cruise control
indicatorBrake hold standby indicator
Cruise control “SET” indicatorBrake hold operated indicator
*2
LTA indicatorEco Driving Indicator Light
BSM outside rear view mirror
indicatorsSnow mode indicator
BSM OFF indicatorLow outside temperature
indicator
Intuitive parking assist OFF
indicator (if equipped)
For further information, refer to the “OWNER’S MANUAL”.
