2023 KIA CARNIVAL buttons

*IF EQUIPPED40CARNIVAL FEATURES & FUNCTIONS GUIDE
A/C
0MAXA/C+
REAR ONREAR REARREAR LOCK
OFF
Manual Climate Control*
A Front fan speed control knob
B Rear window defroster button
C Air conditioning on/off button
D Air intake control buttons
E Front temperature control knob
F Front mode selection buttons
G Rear fan speed control
H Rear temperature control
I Rear control lock button
J Rear control on button
Defrost Outside Windshield:
Set Fan Speed A to the highest position
Set desired Temperature E
Rotate to the Front Defrost mode F
Defog Inside Windshield:
Set Fan Speed A to desired position
Set desired Temperature E
Rotate to the Front Defrost mode F
Your Manual Climate Control system may differ from those in the illustrations. Refer to section 4 in the Owner ’s Manual for more information.
CENTER PANEL
B
A/C
0MAXA/C+
REAR ONREAR REARREAR LOCK
OFF
L Rear air conditioning OFF button
M Rear fan speed control buttons
N Rear mode selection buttons
O Rear temperature control buttons
Rear Climate Control*
MO
N
LC
A
DEF
GHIJ
REMINDER: Warm air may flow in through vents if Recirculated Air but ton is not pressed ON (LED lit)
Air Flow Modes
To select Air Flow Modes, press the Mode selection buttons G:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level (front only)
Front Windshield Defrost
CENTERPANEL

†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. 45
SEATING
Driver Position Memory System*
The integrated system stores into memory the position of the Driver ’s Seat and the Outside Rearview Mirrors.
To store positions into memory, first place the Gear Shift into P (Park) while the Engine Start/Stop button* is in the ON position. Then:
1. Adjust the Driver ’s Seat and the Outside Rearview Mirrors
2. Press the SET button B on the control panel. System will beep once
3. Press one of the memory buttons C within 5 seconds. The system will beep twice when memory has been stored
Easy Access Function*
•The system will automatically move the driver's seat forward when the ignition or the Engine Start/Stop button is pressed to ON or the ACC position
•The system will automatically move the driver's seat rearward when the ignition or the Engine Start/Stop button is pressed to OFF
•To activate or deactivate the Easy Access Function, go to User Settings in the LCD Instrument Cluster modes
These illustrations are for demonstration purposes only. Actual features on vehicle may var y.
Refer to section 3 in the Owner ’s Manual for more information.
Illustrations are for demonstration purposes only. Actual features on vehicle may var y.
SET(Buttons located on Driver's Door Panel)
Refer to section 3 in the Owner ’s Manual for more information.
Front Seat Headrest Adjustment†7
To raise headrest: Pull headrest up.
To lower headrest: Press lock button A and then press the headrest down.
BCC
A
REMINDER: Do not operate the vehicle with the headrests removed. Headrests can provide critical neck and head suppor t in an accident.
REMINDER: Do not at tempt to operate the driver position memor y system while the vehicle is moving. This could result in loss of control of the vehicle.
For easy adjustments, hold a headrest post with one hand while using the other hand to pull the headrest from underneath.
QUICK TIP
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Power Adjustable Driver’s Seat with Memory Settings Video
QR CODE
SEATING

†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. 47
SEATING
J
J
K
K
REMINDER: VIP Seats* are not removable.
•Make sure the VIP seats are moved all the way inward to clear the seatbacks when adjusting and before actuating the relaxation mode
•You may need to move the front passenger seat for ward to make room for the leg extension
•The relaxation mode does not function fully when the seats are in the out ward position
QUICK TIPS
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Carnival 2nd and 3rd Row Seats Video
Unfastening Center Seat Belt Video
QR CODE
Illustrations are for demonstration purposes only. Actual features on vehicle may var y.
Refer to section 3 in the Owner ’s Manual for more information.
Unfastening Center
Seat Belt
If the Seat Belt is buckled, press the release button on the buckle.
To retract the center seatbelt webbing I in the 2nd and/or 3rd rows, use the lap belt tongue plate J to push the “release button” in the small slot on the center belt buckle K.
2nd-Row VIP Seats with Relaxation Mode*†1 2
Forward/backward: Pull up on the lever A to manually move the VIP Seat forward or backward.
Inward/Outward: Pull up on the lever B to manually move the VIP Seat inward or outward. Moving the seat inward allows more space for 3rd-Row access.
Relaxation Mode
Press and hold the front auto-control button C for the VIP Seat to move into relaxation mode. The seatback angles back and the seat cushion tilts up.
Press and hold the rear auto-control button D to move the VIP seat back to its original upright position.
The buttons under the auto-control buttons move the various parts of the seat — seatback forward and backward E, tilt the entire seat F, retract or extend the leg extension G, and seat cushion height adjustment H.
(VIP Seat controls located on the outboard side of seat) (Auto-control but tons located on the inboard side of the VIP Seats)
(VIP Seat adjustment controls located on the inboard side of the VIP Seats)
AB
C
EF
H
G
D
I
ISEATING

†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. 53
OTHER KEY FEATURES
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Carnival Power/Smart Liftgate & Sliding Doors Video
QR CODE
OFFA(But ton located on inside edge of liftgate)
Power Liftgate*†1 6
Opening from Inside the Vehicle:
Press and hold the Power Liftgate Open/Close button A to automatically open/close the Liftgate.
Smart Key:
To open the Power Liftgate, press and hold the Liftgate button B until the Liftgate begins to open. Press and hold again to automatically close.
Auto Open/Close*: To automatically open and close the Power Liftgate / Sliding Doors, press and hold buttons C (close) or D (open) for more than 3 seconds.
REMINDER: Pulling the Liftgate upward by the handle or pressing the but ton a second time will interrupt the automatic opening of the Power Liftgate.
Opening/Closing from Outside the Vehicle:
To open the Power Liftgate automatically, press the Rear Hatch Release button E on the exterior of the Liftgate.
Automatically close by pressing the Power Liftgate Close button F.
To turn off the Power Liftgate Close button function, press button G.
Power Liftgate Opening Height Adjustment
The height setting of a fully opened liftgate (tailgate) can be adjusted by the following steps:
1. Position the liftgate manually to the preferred height
2. Press the Power Liftgate Close button F more than 3 seconds
3. A system beep will sound twice indicating the height setting has been saved
The liftgate will then open to the set height. To change setting again, repeat steps 1-3.
See section 4 in the Owner ’s Manual for more information.
(Located on lower liftgate exterior)
HOLD
HOLDPOWER
DOOR OFFHOLD
HOLDHOLDPOWER
DOOR OFFHOLDA
Remote but ton configuration may var y depending on vehicle options.
HOLD
HOLDHOLD
HOLD
HOLD HOLD
HOLD
HOLDHOLD
HOLD
HOLD
HOLDHOLD
HOLD
HOLDHOLD
HOLDBE
FG
D
C
OTHER KEY FEATURES

*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. 55
OTHER KEY FEATURES
HOLD
HOLDHOLD
HOLD
HOLDHOLD
HOLD
HOLDHOLD
HOLD
HOLD
HOLDHOLD
HOLD
HOLDHOLD
HOLD(But tons located on panel to the left of steering wheel)
HOLD
HOLDPOWER
DOOR OFFHOLD
HOLDHOLDPOWER
DOOR OFFHOLD
#VU UPOT
MPDBUFE
PO
DFOUFS
QJMMBST

Power Sliding Doors
Using the driver ’s panel controls, press the left/right Power Sliding Door buttons A, on the driver ’s panel controls, on the center pillars B or on the key fob C to automatically open/close the sliding doors.
REMINDER: If the POWER DOOR OFF but ton F is depressed, the Smar t Power Liftgate* will not operate.
Smart Key Auto Open/Close*: To automatically open and close the Power Liftgate / Sliding Doors, press and hold buttons D (close) and E (open) for more than 3 seconds.
Power Door OFF Button: When button F is ON (not depressed), the power sliding doors and power liftgate can be controlled with the buttons on the center pillar trim or liftgate B. Also, the doors will open/close automatically when pulling the handles from the inside or outside.
Smart Sliding Door with Auto Open
The sliding doors can be opened hands-free if the Smart Key is detected within the system range. The hazard warning lights will flash and a chime will sound two times and the door nearest the Smart Key will open. To activate the Smart Sliding Door with Auto Open, on some models, go the User Settings in
the Instrument Cluster and select Smart Liftgate. On other models, press the SETUP key on the audio head unit. Then press VEHICLE, DOOR and SMART SLIDING DOOR.
Passenger View* / Passenger Talk*
Passenger View, an in-cabin camera, helps the front passenger talk with rear passengers while viewing them on the audio head unit screen. On the head unit screen, press the Passenger View icon G.
Passenger Talk: Press the button H located on the overhead console to use the Passenger Talk, cabin intercom, function.
REMINDERS:
• The system will not operate when the Smar t Key is detected continuously near the vehicle after the doors are locked, or when a door is not locked or closed
•
Automatic stop and reversal will not activate in all situations
•
The auto-reverse feature is a supplemental feature and should never be relied upon as a primar y safet y device
•
To prevent injur y, make sure no body par ts are in the way of the sliding door when closing
•
Do not leave children or animals unat tended in the vehicle as they may operate the power sliding door in a manner that could result in injur y to themselves or others
•
If you are present but unable to quickly respond or at tend to children or animals in the vehicle, deactivate the power sliding door by pressing the POWER DOOR OFF but ton F on the driver ’s panel to the left of the steering wheel
Passenger
View
PassengerView
AAFBB
C
D
E
H
G
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Carnival Power/Smart Liftgate & Sliding Doors Video
QR CODE
Refer to section 4 in the Owner ’s Manual for more information.
OTHER KEY FEATURES

REMINDERS:
•The Sunvisor may not shield all direct light
•The Sunvisor may impair visibilit y if not adjusted properly
•
Be aware of the seating position when adjusting or swinging Sunvisor around to or from the front or side windows
•Do not operate the vehicle if the Sunvisor is impairing your visibilit y
•When the doors are unlocked by the Smar t Key*, the lamp turns ON for approximately 30 seconds
•If your vehicle is equipped with the theft alarm system, the interior lights automatically turn off approximately 3 seconds after the system is in the armed stage
•Using interior lights for an extended period of time may cause bat ter y discharge
QUICK TIPS
REMINDER: When the Room Lamp lens is pressed ON it will remain ON, even when the Map Lamp switch is in the OFF position.
*IF EQUIPPED56CARNIVAL FEATURES & FUNCTIONS GUIDE
Refer to section 4 in the Owner ’s Manual for more information.
Refer to section 4 in the Owner ’s Manual for more information.
FRONTREARFRONTREAR
REARREAR
FRONTREARFRONTREAR
REARREAR
(Lamp controls located in the overhead consoles). Type A shown.
Rear
Front
Map/Room Lamps
Automatic turn off function*
The interior lights automatically turn off approximately 30 seconds after the Engine Start/Stop button is OFF.
Map/Room Lamp Operation
Press the buttons A to turn the Map Lamps ON/OFF. This light produces a spot beam for convenient use as a map lamp or as a personal lamp for the driver or the front passenger.
When the button B is pressed, the following occurs:
•When any door or the liftgate is opened, the Map and Room Lamps turn ON
•When doors are unlocked from the Smart Key or key removed from ignition, the Map and Room Lamps turn ON for approximately 30 seconds or until a door is opened
•When doors are closed, the lamps will gradually turn OFF after approximately 30 seconds
•When all doors are locked or the ignition is turned ON, the Map Lamp will turn OFF immediately
When the button C is pressed, the lamps stay ON continuously.
Room Lamp – Press the lens D to turn the Room Lamp ON/OFF.
Sunvisor†2 4
Use the Sunvisor to shield direct light through the front or side windows. Slide the Sunvisor out and adjust as needed.
OTHER KEY FEATURES
B
AADD
C
OTHER KEY FEATURES

CA
D
E
F
G
•You can reprogram a single HomeLink® but ton by repeating Step 2
•Erasing the programmed but tons will delete all trained transmit ters
QUICK TIPS
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Homelink® Support Video
QR CODE
B
†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. 59
How to Sync Transmitter with HomeLink®*
If programming for the first time, begin with Step 1 (repeating this step will delete all information).
To program non-rolling and rolling code garage door openers and other devices:
1. Press and hold the left A and center C buttons simultaneously until the indicator light G begins to flash (to reprogram buttons, skip this step)
2. Press and hold the desired button A B C and hold the button on the transmitter while it is approximately 1 to 3 inches away from the mirror. The HomeLink®
Indicator light E will flash rapidly once the frequency signal has been successfully programmed
To finish programming rolling code garage door openers, complete these steps:
3. Locate the “learn” or “smart ” button on the garage door ’s motor head unit. Press and release the button and complete Step 4 within 30 seconds
4. Firmly press and release the programmed HomeLink® button up to three times
Operating HomeLink®:
Press one of the programmed HomeLink® buttons.
Erasing programmed buttons:
Press and hold the A and C buttons simultaneously for approximately 20 seconds, and then release both buttons within 30 seconds.
The HomeLink® / Auto-Dimming Rearview Mirror* is designed to reduce glare from a vehicle’s headlights located in the rear and also connect up to three electronic transmitters into one location.
HomeLink®†2 with Auto-Dimming Rearview Mirror*
A HomeLink® Channel 1
B HomeLink® Channel 2
C HomeLink® Channel 3
D Garage Door Opener Status Indicator: Closing or Closed
E HomeLink® Operation Indicator
F Garage Door Opener Status Indicator: Opening or Open
G HomeLink® User Interface Indicator
If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s HomeLink® system, you may need to purchase a HomeLink® Repeater Kit. For more information, go to w w w.HomeLink.com or call (800) 355-3515.
OTHER KEY FEATURES
OTHER KEY FEATURES