2023 INFINITI QX60 remove seats

1 Safety-Seats, seat belts and supplemental
restraint system
Seats............................................1-2
Front power seat adjustment ..................1-3
2nd row seat adjustment ......................1-5
3rd row bench seat adjustment ................1-7
Armrests .....................................1-8
Flexible seating ...............................1-8
Head restraints/headrests ......................1-12
Adjustable head restraint/headrest
components ................................. 1-13
Non-adjustable head restraint/headrest
components ................................. 1-13
Remove ..................................... 1-14
Install ....................................... 1-15
Adjust ....................................... 1-15
Folding head restraint/headrest ..............1-16
Seat belts ....................................... 1-17
Precautions on seat belt usage ...............1-17
Seat belt warning light and chime ............1-20
Pregnant women ........................... 1-20
Injured persons ............................. 1-20
Pre-crash seat belts with comfort
function (front seats) (if so equipped) ........1-20
Three-point type seat belt with retractor ......1-21 Seat belt extenders
......................... 1-24
Seat belt maintenance .......................1-25
Child safety ..................................... 1-25
Infants ..................................... 1-26
Larger children ............................... 1-27
Child restraints ................................. 1-28
Precautions on child restraints ...............1-28
LATCH (Lower Anchors and Tethers for
CHildren) system ............................ 1-30
Rear-facing child restraint installation
using LATCH ................................ 1-37
Rear-facing child restraint installation
using the seat belts ......................... 1-39
Forward-facing child restraint installation
using LATCH ................................ 1-41
Forward-facing child restraint installation
using the seat belts ......................... 1-45
Booster seats ................................ 1-51
Supplemental Restraint System (SRS) ...........1-54
Precautions on SRS ......................... 1-54
Supplemental air bag warning labels ..........
1-74
Supplemental

air bag warning light ...........1-75

One touch walk-in function
The 3rd row can be accessed from outside
the vehicle by using the seat release button
located at the base of the 2nd row seat
OA.
The 3rd row occupant can exit their seat from
inside the vehicle by using the secondary seat
release button located on the back of the 2nd
row seat
OB. If a child safety seat is installed
in the 2nd row seat, the 3rd row can be
accessed without removing the child safety
seat. If the seat back is folded down, the one touch
function will be disabled. To pitch the seat,
you must return the seat back to the upright
position.
Multi-mode
WARNING
When returning the seat to its original po-
sition, confirm that the seat and seatback
are locked properly.
CAUTION
• Be careful not to pinch your hand or foot
or bump your head when operating the
walk-in seat.
• Do not drive with the 2nd row seat
tipped up.
• Be careful not to allow the 2nd row seat
to pinch, hit any part of your body or
other people when operating the 2nd
row seat. Make sure the seat path and
seatback is clear of all objects before
moving the seat.
To enter the 3rd row from outside the ve-
hicle, push the seat release button located at
the base of the 2nd row seat. To exit the 3rd
row from inside the vehicle, push the seat
release button located on the back of the 2nd row seat. Activating this seat release switch
will pitch the 2nd row seat forward so you
will be able to slide the seat forward and
backward.
Slide the entire seat forward for access to the
3rd row.
To return the seat to a locked position, push
the upper seatback rearward until the seat is
locked.
Child seat access mode
The 2nd row seat can be slid forward for easy
entry or exit from the 3rd row bench seat
without a child safety seat being removed.
To enter the 3rd row from outside the ve-
hicle, push the seat release button located at
the base of the 2nd row seat. To exit the 3rd
row from inside the vehicle, push the seat
release button located on the back of the 2nd
row seat. Activating this seat release button
allows you to pitch and slide the seat forward
and backward.
Slide the entire seat forward for access to the
3rd row seats.
To return the seat to a locked position, push
the upper seatback rearward until the seat is
locked.
LRS3382
1-6Safety-Seats, seat belts and supplemental restraint system

•When folding the bench seat seatback
down for maximum storage, make sure
the seat base is in the latched position by
rocking the seat base. If the seat base is
not properly secured, cargo stored on
top of a folded seatback may become a
projectile causing personal injury or ve-
hicle damage.
• Do not allow people to ride in any area of
your vehicle that is not equipped with
seats and seat belts. Be sure everyone in
your vehicle is in a seat and using a seat
belt properly.
• Do not allow more than one person to use
the same seat belt.
• Do not fold down the rear seats when
occupants are in the rear seat area or any
luggage is on the rear seats.
– Make sure that the seat path is clear
before moving the seat.
– Be careful not to allow hands or feet
to get caught or pinched in the seat.
• Head restraints/headrests should be ad-
justed properly as they may provide sig-
nificant protection against injury in an
accident. Always replace and adjust
them properly if they have been removed
for any reason. •
If the head restraints/headrests are re-
moved for any reason, they should be se-
curely stored to prevent them from caus-
ing injury to passengers or damage to the
vehicle in case of sudden braking or an
accident.
• When returning the seatbacks to the up-
right position, be certain they are com-
pletely secured in the latched position. If
they are not completely secured, passen-
gers may be injured in an accident or sud-
den stop.
• Properly secure all cargo to help prevent
it from sliding or shifting. Do not place
cargo higher than the seatbacks. In a
sudden stop or collision, unsecured cargo
could cause personal injury.CAUTION
• When folding the 2nd row seat for maxi-
mum cargo holding, be sure that the
cargo does not contact the center con-
sole of the captain’s seat (if so equipped)
to avoid possible damage to the console.
• When folding or returning the seat(s) to
the upright position, to avoid injury to
yourself and others:
– Make sure that the seat path is clear
before moving the seat.
– Be careful not to allow hands or feet
to get caught or pinched in the seat.
Safety-Seats, seat belts and supplemental restraint system1-9

Folding the 2nd row seats
To fold the 2nd row seats flat for maximum
cargo hauling:
1. Make sure that the head restraints/headrests are lowered or removed. To re-
move the head restraint/headrest, push
and hold the lock knob while moving the
head restraint/headrest in an upward di-
rection. Store the head restraint/headrest
properly so it is not loose in the vehicle.
2.
Stow the 2nd row seat belts in the seat belt
hooks found on the sides of the vehicle.
3. Lift up on the recline lever on the side of the outboard seats to fold the seatbacks
flat. The seatback will lock into place
when in cargo mode to optimize the load
floor.
4. To return the 2nd row seats to a seating position, lift up on the recline lever on the
side of the outboard seats and push up on
the seatback until it latches in place.3rd row manual folding seats
To fold the 3rd row seats flat for maximum
cargo capacity:
1. Pull the strap
OAto release the head
restraint/headrest forward.
2. Pull up on the latch
OBlocated in the
upper corner of each seatback and lower
the seatback forward over the seat base.
LRS3520
2nd row captain’s seats (if so equipped)
LRS3452
2nd row bench seats (if so equipped)
LRS3543
1-10Safety-Seats, seat belts and supplemental restraint system

•Do not allow people to ride in any area of
your vehicle that is not equipped with
seats and seat belts. Be sure everyone in
your vehicle is in a seat and using a seat
belt properly.
• Do not fold down the 3rd row seats when
occupants are in the 3rd row seat area or
any luggage is on the 3rd row seats.
– Make sure that the seat path is clear
before moving the seat.
– Be careful not to allow hands or feet to
get caught or pinched in the seat.
• Properly secure all cargo to help prevent
it from sliding or shifting. Do not place
cargo higher than the seatbacks. In a
sudden stop or collision, unsecured cargo
could cause personal injury.WARNING
Head restraints/headrests supplement the
other vehicle safety systems. They may
provide additional protection against in-
jury in certain rear end collisions. Adjust-
able head restraints/headrests must be
adjusted properly, as specified in this sec-
tion. Check the adjustment after someone
else uses the seat. Do not attach anything
to the head restraint/headrest stalk, ex-
cept for genuine INFINITI accessories spe-
cifically tested for use with the vehicle’s
head restraint/headrest stalk. Do not re-
move the head restraint/headrest. Do not
use the seat if the head restraint/headrest
has been removed. If the head restraint/
headrest was removed, reinstall and prop-
erly adjust the head restraint/headrest
before an occupant uses the seating posi-
tion. Failure to follow these instructions
can reduce the effectiveness of the head
restraints/headrests. This may increase
the risk of serious injury or death in a
collision. The illustration shows the seating positions
equipped with head restraints/headrests.

Indicates the seating position is equipped
with a head restraint.
 Indicates the seating position is equipped
with a headrest.
• Adjustable head restraints/headrests have multiple notches along the stalk(s) to lock
them in a desired adjustment position.
• The non-adjustable head restraints/ headrests have a single locking notch to
secure them to the seat frame.
LRS3414
Captain’s seats (if so equipped)
HEAD RESTRAINTS/HEADRESTS
1-12Safety-Seats, seat belts and supplemental restraint system

REMOVE
Use the following procedure to remove the
head restraint/headrest:
1. Pull the head restraint/headrest up to thehighest position.
2. Push and hold the lock knob.
3. Remove the head restraint/headrest from the seat.
4. Store the head restraint/headrest prop- erly in a secure place so it is not loose in
the vehicle. 5. Reinstall and properly adjust the head
restraint/headrest before an occupant
uses the seating position.
LRS3391
Type B (if so equipped)
LRS2302
1-14Safety-Seats, seat belts and supplemental restraint system

3. For child restraints that are equipped withwebbing-mounted attachments, remove
any additional slack from the anchor at-
tachments. Press downward and rear-
ward firmly in the center of the child re-
straint with your hand to compress the
vehicle seat cushion and seatback while
tightening the webbing of the anchor
attachments. 4. After attaching the child restraint, test it
before you place the child in it. Push it
from side to side while holding the child
restraint near the LATCH attachment
path. The child restraint should not move
more than 1 inch (25 mm), from side to
side. Try to tug it forward and check to see
if the LATCH attachment holds the re-
straint in place. If the restraint is not se-
cure, tighten the LATCH attachment as
necessary, or put the restraint in another
seat and test it again. You may need to try
a different child restraint or try installing
LRS2996
Rear-facing rigid-mounted – step 2
LRS0673
Rear-facing – step 3
LRS0674
Rear-facing – step 4
1-38Safety-Seats, seat belts and supplemental restraint system

2. Route the seat belt tongue through thechild restraint and insert it into the buckle
until you hear and feel the latch engage.
Be sure to follow the child restraint manu-
facturer’s instructions for belt routing. 3. Pull the shoulder belt until the belt is fully
extended. At this time, the seat belt re-
tractor is in the ALR mode (child restraint
mode). It reverts to the ELR mode when
the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on
the shoulder belt to remove any slack in
the belt.
WRS0761
Rear-facing – step 2
LRS2395
Rear-facing – step 3
LRS2396
Rear-facing – step 4
1-40Safety-Seats, seat belts and supplemental restraint system