
Seats & Safety System
3-62
SRS Care
The SRS is virtually maintenance-freeand
there are no parts you can safely service
by yourself. If the SRS air bag warning
light does not illuminate when the
ignition switch is in the ON position,
or continuously remains on, have your
vehicle immediately inspected by
anauthorized HYUNDAI dealer. Any work
on the SRS system, such as removing,
installing, repairing, or anywork on the
steering wheel, the front passenger’s
panel, front seats and roofrails must be
performed by an authorized HYUNDAI
dealer. Improper handling ofthe SRS
system may result in serious personal
injury. WARNING
To reduce the risk of serious injury or
death take the following precautions:
• Do not attempt to modify or
disconnect the SRS components or
wiring, including the addition of any
kind of badges to the pad covers or
modifications to the body structure.
• Do not place objects over or near
the air bag modules on the steering
wheel, instrument panel, and the
front passenger’s panel above the
glove box.
• Clean the air bag pad covers with
a soft cloth moistened with plain
water. Solvents or cleaners could
adversely affect the air bag covers
and proper deployment of the
system.
• Always have inflated air
bagsreplaced by an authorized
HYUNDAIdealer.
• If components of the air bag system
must be discarded, or if the vehicle
must be scrapped, certain safety
precautions must be observed.
Consult an authorized HYUNDAI
dealer for the necessary information.
Failure to follow these precautions
could increase the risk of personal
injury.

04
4-17
4 Wheel Drive (AWD) LOCK
Indicator Light
This indicator light illuminates:
• Once you set the ignition switch or
Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
• When you select AWD Lock mode by
pressing the AWD LOCK button.
- The AWD LOCK mode is to increase
the drive power when driving on
wet pavement, snow covered roads
and/or off-road.
NOTICE
Do not use AWD LOCK mode on dry
paved roads or highway, it can cause
noise, vibration or damage of AWD
related parts.
LED headlight warning light
This warning light illuminates:
• When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
- The LED headlight warning light
illuminates for approximately 3
seconds and then goes off.
• Whenever there is a malfunction with
the LED headlight.
If the LED headlight warning light
remains illuminated while driving,
have the vehicle inspected by an
authorized HYUNDAI dealer.
This warning light blinks:
Whenever there is a malfunction with a
LED headlight related part.
If this occurs, have the vehicle inspected
by an authorized HYUNDAI dealer.
NOTICE
Continuous driving with the LED
Headlight warning light on or blinking
can reduce LED headlight life.

Convenient Features
5-56
Automatic reverse (if equipped)
OCN7050026OCN7050026
If a window senses any obstacle while it
is closing automatically, it will stop and
lower approximately 12 in. (30 cm) to
allow the object to be cleared.
If the window detects the resistance
while the power window switch is
pulled up continuously, the window
will stop upward movement then lower
approximately 1 in. (2.5 cm).
If the power window switch is pulled
up continuously again within 5 seconds
after the window is lowered by the
automatic window reverse feature,
the automatic window reverse will not
operate.
Information
The automatic reverse feature is only
active when the “Auto Up” feature is used
by fully pulling up the switch to the second
detent.
NOTICE
Do not install any accessories on the
windows. The automatic reverse
feature may not operate.
WARNING
Make sure body parts or other objects
are safely out of the way before closing
the windows to avoid injuries or vehicle
damage.
Objects less than 0.16 in (4 mm) in
diameter caught between the window
glass and the upper window channel
may not be detected by the automatic
reverse window and the window will
not stop and reverse direction.

Convenient Features
5-58
Rear Sliding Window (if
equipped)
Your vehicle is equipped with a rear
sliding window behind the rear seats.
Opening the rear sliding window
ONX4OB051049ONX4OB051049
Push the lock release lever and slide the
rear sliding window to the left.
Closing the rear sliding window
ONX4OB051050ONX4OB051050
Slide the rear sliding window to the right
until it is securely locked.
WARNING
• Make sure heads, hands, arms or any
other body parts or objects are out
of the way before closing the rear
sliding window.
• Close the rear sliding window to
prevent theft when leaving the
vehicle.
• Keep the rear sliding window closed
while driving. If the rear sliding
window is opened, luggage may be
unexpectedly thrown out and cause
an accident. Also, exhaust gases may
enter the vehicle. This could result in
serious injury or death.

05
5-61
Automatic Reversal
ODH043039ODH043039
If the sunroof glass senses any obstacle
while it is closing automatically, it will
reverse direction then stop at a certain
position.
The auto reverse function may not
work if an object thin or soft is caught
between the sliding sunroof glass and
sunroof sash.
WARNING
Make sure heads, hands, arms or any
other body parts or objects are out of
the way before operating the sunroof.
Body parts or objects may get caught
causing injuries or vehicle damage.
Never deliberately use your body
parts to test the automatic reversal
function. The sunroof glass may reverse
direction, but there is a risk of injury.
NOTICE
• Do not continue to push the sunroof
switch after the sunroof is fully
opened, closed, or tilted. Damage to
the sunroof motor could occur.
• Continuous operations such as slide
open/close, tilt open/close, etc. may
cause the motor or sunroof system to
malfunction.
• Regularly remove any accumulated
dust on the sunroof rail.
• Dust accumulated between the
sunroof and roof panel can make
noise Open the sunroof and remove
dust regularly using a clean cloth.
• Do not try to open the sunroof when
the temperature is below freezing
or when the sunroof is covered
with snow or ice. The sunroof may
not work properly and may break if
opened by force.
• Do not open or drive with the sunroof
glass open immediately after rain or
washing the vehicle. Water may wet
the interior of the vehicle.
• Do not extend any luggage outside
the sunroof while driving. Vehicle
damage may occur if the vehicle
suddenly stops.
WARNING
Do not extend your head, arms, body
parts or objects outside the sunroof
while driving. Injuries may occur if the
vehicle suddenly stops.

Convenient Features
5-116
Half opening tonneau cover (from
closed)
ONX4OB051062ONX4OB051062
1. Push tonneau handle forward until
unlatched. (Handle will stay in
“unlatched” position)
ONX4OB051067ONX4OB051067
2. Return handle to “latched” position.
3. Tonneau cover will open and stop at
halfway position.
NOTICE
• Tonneau cover is made of aluminium
profiles which heats up and cools
down relatively quick according to
weather conditions. This can cause
condensation on the inside of the
profiles and the panels.
• The pull strap has been designed
only for opening and closing the Roll
cover. The carabineer and ring will be
damaged in case of excessive load.
• Goods in the pickup bed must be
secured during transportation to
prevent damage on the structural
parts of tonneau cover (especially
the canister.)
• If the tonneau cover is closed and
has water, snow, ice or dirt on the
cover, it might enter into the pickup
bed as the cover retracts. To avoid
this, clean off the top surface of the
cover prior to opening.
• When opening the cover, the
opening should be careful and
controlled using the pull strap to
prevent the cover from hitting the
front with full speed, which it has
NOT been designed for.
CAUTION
• The Roll cover is not designed for
loading although it can support
normal snow loads. No part of it
can support any load from cargo or
persons and the product might be
damaged if somebody stands on it.