2023 HYUNDAI IONIQ 6 change wheel

5
5-73
with the drive mode. In the case of the
rear seat, if the 'Link to Drive Mode'
function is selected while the
speed-linked interior lighting is not
selected, the rear seat mood lamp
changes color in conjunction with the
drive mode.
• When you select Setup > Vehicle >
Lights > Ambient Light > Link to Speed
Alert in the infotainment system, the
driver's and front passenger's mood
lamps change to red and blink when the
vehicle speed exceeds the speed limit.
In the case of the rear seat, when the
'Sync Lighting with Speed' function is
set, the mood lamp does not turn on
even if the Link to Speed Alert function
is set, but the mood lamp changes to
red and blink when the vehicle speed
exceeds the speed limit.
• When you select Setup > Vehicle >
Lights > Ambient Light > Sync Lighting
with Speed in the infotainment system,
the brightness of the driver's and front
passenger's mood lamps changes
according to the speed. In the case of
the rear seat, when the 'Sync Lighting
with Speed' function is selected, the
mood lamp is turned on only in the ‘P’
(park). However, if the 'Link to Speed
Alert' function is selected, the rear seat
mood lamp will also blink in red when
the vehicle speed exceeds the speed
limit.
• After selecting Setup > Vehicle > Lights
> Ambient Light > Link to Voice
Recognition in the infotainment
system, when the voice recognition
button on the steering wheel is
pressed, the length of the dashboard's
mood lamp lighting changes according
to the volume of the user's voice and
the pitch of the vehicle guidance voice.
• When the driver gets into the vehicle, the mood lamp on the dashboard turns
on in sequence in conjunction with the
welcome animation on the instrument
panel. When getting off, the mood lamp
on the dashboard turns off one after another in conjunction with the
good-bye animation on the instrument
panel.
• When the vehicle is drivable (the instrument panel indicator is on),
the dashboard mood lamp turns on.
However, the mood lamp does not turn
on when using the utility mode.
Front Trunk Lamp
The lamp illuminates when the hood
opens. The lamp keeps coming on when
the hood is not completely closed.
B5019401
NOTICE0DNHVXUHLWLVIXOO\FORVHGDIWHUFORVLQJ
WKHKRRG,ILWLVOHIWRSHQZLWKRXWVWDUWLQJ
YHKLFOHWKHODPSFRPHVRQDQGWKH
EDWWHU\PD\EHGLVFKDUJHG

Hyundai_CE_en_US.book Page 73

5
5-99
one-touch automatic window function
for all seats. To use this feature, it must
be enabled from the Settings menu in
the infotainment system. Select Setup
> Vehicle > Climate > Recirculate air >
Others .
Information The infotainment system may change after
software updates. For more information, refer
to the user's manual provided in the
infotainment system and the quick reference
guide.

Automatic Controls Linked to
Climate Control Settings (for
driver’s seat)
The temperature of the driver’s seat
warmer, air ventilated seat and heated
steering wheel is automatically controlled
depending on the inside and outside
temperature of the vehicle when the
vehicle is running.
To use these features, it must be enabled
from the Settings menu in the
infotainment system.
Select Setup > Vehicle > Seat >
Warmer/Ventilation Features > Link to
Climate Settings for Auto-Adjustment >
Driver Seat Warmer/Ventilation .
For more information on Auto Comfort
Control, refer to the "Seat Warmers" and
"Air Ventilation Seats" section in chapter 3
and "Heated Steering Wheel" section in this chapter.
Smart Ventilation
The smart ventilation system maintains
pleasant/fresh air condition inside the
passenger compartment by
automatically detecting/controlling the
temperature and humidity, when you
drive the vehicle with the climate control
system in the OFF position. When the smart ventilation system starts to
operate, the message
'SMART
VENTILATION ON' appears for 5 seconds.
• The smart ventilation system stops operating, when the BLOWER DOWN
OFF button of the climate control
system is selected.
• The smart ventilation system stops operating, when any button of the
climate control system is selected for
operation.
• The smart ventilation system may not operate, when the vehicle is driven at
low speed.
Hyundai_CE_en_US.book Page 99

Convenience Features
5-108
Antenna
B5025101
The shark fin antenna will receive AM, FM
broadcast signals and transmit data.
Steering Wheel Remote
Controls
B5025401
NOTICE'RQRWRSHUDWHPXOWLSOHDXGLRUHPRWH
FRQWUROEXWWRQVVLPXOWDQHRXVO\

VOLUME (VOL + / VOL -) (1)
• Rotate the VOLUME scroll up to increase volume.
• Rotate the VOLUME scroll down to decrease volume.
Information You can set the volume level of each source
(FM, AM, SXM, USB, BT, etc.) individually
by adjusting the VOLUME scroll.
Then the infotainment system saves the last
volume level of each source in the system
sound settings.
If you change the source, the volume will
revert to the previously set volume for that
source.

SEEK/PRESET ( / ) (2)
If the SEEK/PRESET switch is pressed up
or down and held for 0.8 second or more,
it will function in the following modes:
RADIO mode
It will function as the AUTO SEEK select
button. It will SEEK until you release the
button.
MEDIA mode
It will function as the FF/RW button.
If the SEEK/PRESET switch is pressed up
or down, it will function in the following
modes:
RADIO mode
It will function as the PRESET STATION
UP/DOWN button.
MEDIA mode
It will function as the TRACK UP/ DOWN
button.
MODE (3)
Press the MODE button to toggle through
Radio or AUX modes.
MUTE ( ) (4)
Press the MUTE( )button to mute or
activate the sound.
12
3
4
Hyundai_CE_en_US.book Page 108

6
6-5
Start/Stop Button Positions
Information To prevent vehicle battery discharge, the Start/Stop button changes to the OFF position when the
Start/Stop button is in the ACC or ON position with the gear in P (Park) for a certain period of
time. When the function operates, the tail lights will turn off. To use the tail lights again, turn the
headlight switch located on the steering column to the OFF and ON position again.

Button
PositionActionNotes
OFF To turn off the vehicle, press the
Start/Stop button with the vehicle
shifted to P (Park). If the Start/Stop
button is pressed with the vehicle
shifted to D (Drive), R (Reverse) or N
(Neutral), the gear automatically
shifts to P (Park). If the steering wheel is not locked
properly when you open the driver’s
door, the warning chime sounds.
ACC Press the Start/Stop button when the
button is in the OFF position without
depressing the brake pedal. Some of
the electrical accessories are usable.
The steering wheel unlocks.
If you leave the Start/Stop button in
the ACC position for more than one
hour, the battery power turns off
automatically to prevent the battery
from discharging. If the steering
wheel does not unlock properly, the
Start/Stop button does not work.
Press the Start/Stop button while
turning the steering wheel right and
left to release.
ON Press the Start/Stop button while it is
in the ACC position without
depressing the brake pedal. The
warning lights can be inspected
before the vehicle is started. Do not leave the Start/Stop button in
the ON position when the vehicle is
not running to prevent the battery
from discharging.
START To start the vehicle, depress the brake
pedal and press the Start/Stop button
with the gear shifted to the P (Park)
position. If you press the Start/Stop button
without changes as follows:
OFF >
ACC > ON > OFF or ACC
Hyundai_CE_en_US.book Page 5

Driving Your Vehicle
6-10
NOTICE$OZD\VFRPHWRDFRPSOHWHVWRSEHIRUH
VKLIWLQJLQWRRURXWRI55HYHUVH\fWR
SUHYHQWGDPDJLQJWKHJHDU

N (Neutral)
B6013703
To shift the gear to N (Neutral), rotate the
rotary shifter to N (Neutral) while
depressing the brake pedal.
Always depress the brake pedal when you
are shifting from N (Neutral) to another
gear.
If you turn the vehicle off in N (Neutral),
the gear will automatically shift to P
(Park).
However, if you need to stay in N
(Neutral) with the vehicle off, refer to the
“To stay in N (Neutral) when vehicle is
OFF” in the following description.
To rotate the rotary shifter to N (Neutral),
rotate the rotary shifter once clockwise or
counterclockwise.
If the current gear position is in D (Drive),
rotate the rotary shifter
counterclockwise. When the gear
position is in R (Reverse), rotate the rotary
shifter clockwise.
To stay in N (Neutral) when vehicle is
OFF
B6013705
B6013706
[A] OK button
If you want to stay in N (Neutral) after the
vehicle is in the ACC state, do the
following:
1. Turn off Auto Hold and release Electronic Parking Brake when the
vehicle is on ( indicator on).
2. Rotate the rotary shifter to N (Neutral) while depressing the brake pedal.
3. Take your foot off the brake pedal. The message ‘Press and hold OK button
Press and hold the OK button on the
steering wheel to stay in Neutral'
appears on the cluster display.
4. Press and hold the OK button on the steering wheel for more than 1 second.
5. When the message ‘Vehicle will stay in
(N). Change gear to cancel’ appears on
the cluster display, press the Start/Stop
button while depressing the brake
pedal.
However, if you open the driver’s door
within 3 minutes in the ACC state, the
1SFTT
BOE
IPME
UIF
0,
CVUUPO
PO
UIF
TUFFSJOH
XIFFM
UP
TUBZ
JO
/FVUSBM
Hyundai_CE_en_US.book Page 10

Driving Your Vehicle
6-14
• Always apply the parking brake when leaving the vehicle. Do not depend on
placing the shift gear in P (Park) to keep
the vehicle from moving.
• Exercise extreme caution when driving on a slippery surface. Be especially
careful when braking, accelerating, or
shifting gears. On a slippery surface, an
abrupt change in vehicle speed can
cause the drive wheels to lose traction
and may cause loss of vehicle control
resulting in an accident.
• Optimum vehicle performance and economy is obtained by smoothly
depressing and releasing the
accelerator pedal.
WARNING To reduce the risk of SERIOUS INJURY or
DEATH:
• ALWAYS wear your seat belt. In a collision, an unbelted occupant is
significantly more likely to be seriously
injured or killed than a properly belted
occupant.
• Avoid high speeds when cornering or turning.
• Do not make quick steering wheel movements, such as sharp lane
changes or fast, sharp turns.
• The risk of rollover is greatly increased if you lose control of your vehicle at
highway speeds.
• Loss of control often occurs if two or more wheels drop off the roadway and
the driver over steers to reenter the
roadway.
• In the event your vehicle leaves the roadway, do not steer sharply. Instead,
slow down before pulling back into the
travel lanes.
• HYUNDAI Vehicle recommends you to follow all posted speed limits.

Regenerative Braking
System (Paddle Shifter)
Regenerative braking system operates
the paddle shifter to control the
regenerative braking intensity of the
vehicle. It improves the fuel efficiency of
the vehicle and helps the driver to have a
better driving experience.
Information The regenerative braking system uses the
electric motor to engage the brake. The
electric motor converts the kinetic energy
generated from decelerating the vehicle to
electricity and charges the high voltage
battery.

Using Regenerative Braking
System
Operating paddle shifter
Operate the paddle shifter as shown
below to use the regenerative braking
system.
B6001901
• Pull the left paddle shifter ( ) once to raise the regenerative braking intensity
level by 1. It will increase decelerating
intensity.
• Pull the right paddle shifter ( ) once to lower the regenerative braking
Hyundai_CE_en_US.book Page 14

6
6-15
intensity level by 1. It will decrease
decelerating intensity.
• Pull and hold the left paddle shifter ( ) for over 0.5 seconds to keep
raising the regenerative braking
intensity level. Holding the paddle
shifter brings the vehicle to stop. (For
more information, refer to the "One
Pedal Driving" section in this chapter.)
• While the smart regeneration system is turned on, pull and hold the right
paddle shifter ( ) for over 1 second to
turn off the smart regeneration system.
(For more information, refer to the
"Smart Regeneration System" section
in this chapter.)
Checking the amount of
regenerative braking
B6001902
The selected regenerative braking level
appears on the instrument cluster.
• When the vehicle is turned off and on again after the regenerative braking
level is in 0, the braking level is changed
to 1.
• When the vehicle is turned off and on again after the i-PEDAL is on, the
braking level is changed to 3.
Regenerative Braking System
Limitations
Regenerative braking intensity cannot be
changed using the paddle shifter in the
following situations when:
• The ( ) and ( ) paddle shifters are pulled at the same time.
• The vehicle is decelerating by depressing the brake pedal.
• Smart Cruise Control is activated.
• The regenerative braking is continuously operated with the battery
fully charged
• The SNOW mode is activated
Initial setting of the regenerative braking
level and adjustable range may vary
according to the selected Drive mode.
For more information, refer to the "All
Wheel Drive (AWD)" section in this
chapter.
One Pedal Driving
One pedal driving operates the paddle
shifter while coasting to control the
intensity of regenerative braking. It
assists the driver to stop the vehicle
without depressing the brake.
Information Coasting is the process of driving a vehicle
without the brake pedal and the accelerator
pedal depressed. Coasting uses the inertia of
driving energy instead of the vehicle power.

Drive ModeAdjustable Range
SNOW 0 to 1
ECO 0 to 3
NORMAL 0 to 3
SPORT 0 to 3
Hyundai_CE_en_US.book Page 15

Driving Your Vehicle
6-20
holding the right paddle shifter ( ) for
over one second.
If the smart regeneration system does not
operate normally after the sensor has
been uncovered or unblocked, have the
vehicle inspected by an authorized
HYUNDAI dealer.
Smart Regeneration System
Precautions
• Always monitor the distance to vehicles ahead on the road. The smart
regeneration system is not a substitute
for safe driving practices, but a
supplemental function only.
• Always maintain a safe distance from the vehicles ahead and adjust your
vehicle speed to the road conditions.
The smart regeneration system may not
recognize unexpected and sudden
situations or complex driving
situations.
General precautions
• Always maintain a safe distance from the vehicles ahead and adjust your
vehicle speed depending on the road
conditions.
• Always prepare for unexpected situations and depress the brake pedal
to decelerate when necessary. The
smart regeneration system cannot
react to pedestrians, vehicles making a
sudden stop and vehicles coming from
the opposite lane.
• If the vehicle ahead frequently changes the lane, keep your eyes forward to be
prepared for hazardous situations. In
this case, the smart regeneration
system may respond late and may
inappropriately respond to vehicle
movements from the side lanes.
• The driver must depress the brake pedal when stopping the vehicle.
• Depress the brake pedal to decelerate in the following conditions when: - The front part of the vehicle is lifted
up because of the cargo loaded on
the rear part of the vehicle.
- You are operating the steering wheel.
- You are not driving in the center of the lane.
- You are driving on a narrow or curved road.
• The smart regeneration system may be temporarily turn off when exposed to
strong electromagnetic waves.
• If the vehicle starts coasting near the speed camera and engages the brake
with the smart regeneration system,
the vehicle may not be able to keep the
speed limit. Always comply with the
road and traffic law.
Sensor precautions
• Never disassemble the radar or radar assembly, and never apply any impact
on it.
• If there is impact on or near the radar, the sensors may be damaged or not be
properly aligned near the radar, even
though a warning message does not
appear on the instrument cluster, the
Smart Regeneration System may not
operate properly. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
• If the radars have been replaced or repaired, have the vehicle inspected by
an authorized HYUNDAI dealer.
• Use only genuine parts to repair the bumper where the radar is located.
• Do not install a license plate frame or other objects such as bumper sticker,
film, bumper guard, or bumper wrap
near the radar.
• The Smart Regeneration System may not work properly if the bumper has
been replaced, or the surroundings of
the radar has been damaged or
painted.
Hyundai_CE_en_US.book Page 20