Page 87 of 649
3-50
Safety system
OIK037081R
„Driver's front air bag (1)
When the SRSCM detects a sufficiently
severe impact to the front of the vehicle,
it will automatically deploy the front air
bags.
OIK037082R
„Driver's front air bag (2)
Upon deployment, tear seams molded
directly into the pad covers will separate
under pressure from the expansion of
the air bags. Further opening of the
covers allows full inflation of the air
bags.
A fully inflated air bag, in combination
with a properly worn seat belt, slows the
driver’s or the front passenger’s forward
motion, reducing the risk of head and
chest injury.
OIK037083R
„Driver's front air bag (3)
OIK037084R
„Passenger’s front air bag
After complete inflation, the air bag
immediately starts deflating, enabling
the driver to maintain forward visibility
and the ability to steer or operate other
controls.
WARNING
To prevent objects from becoming
dangerous projectiles when the
passenger’s air bag inflates:
[ Do not install or place any objects
(drink holder, CD holder, stickers,
etc.) on the front passenger’s panel
above the glove box where the
passenger’s air bag is located.
[ Do not install a container of liquid air
freshener near the instrument cluster
or on the instrument panel surface.
Page 94 of 649
3-57
03
SRS Care
The SRS is virtually maintenance-free
and there are no parts you can safely
service by yourself. If the SRS air bag
warning light does not illuminate
when the ignition switch is in the ON
position, or continuously remains on,
we recommend that the system be
immediately inspected by a HYUNDAI
authorised repairer.
We recommend any work on the SRS
system, such as removing, installing,
repairing, or any work on the steering
wheel, the front passenger’s panel, front
seats and roof rails be performed by a
HYUNDAI authorised repairer. Improper
handling of the SRS system may result in
serious personal injury.
WARNING
To reduce the risk of serious injury or
death take the following precautions:
[ Do not attempt to modify or
disconnect the SRS components or
wiring, including the addition of any
kind of badges to the pad covers or
modifications to the body structure.
[ Do not place objects over or near
the air bag modules on the steering
wheel, instrument panel, and the
front passenger’s panel above the
glove box.
[ Clean the air bag pad covers with
a soft cloth moistened with plain
water. Solvents or cleaners could
adversely affect the air bag covers
and proper deployment of the
system.
[ We recommend that inflated air bags
be replaced by a HYUNDAI authorised
repairer.
[ If components of the air bag system
must be discarded, or if the vehicle
must be scrapped, certain safety
precautions must be observed.
We recommend that you consult a
HYUNDAI authorised repairer for
the necessary information. Failure
to follow these precautions could
increase the risk of personal injury.
Page 99 of 649
4-4
Instrument cluster
Instrument cluster control
You can adjust the brightness of the
instrument panel illumination form the
User Settings Mode on the LCD display
when the ignition switch is on ('Lights
J Illumination’). When the vehicle’s
parking lights or headlamps are on,
interior switch illumination intensity and
mood lamps are also adjusted.
If your vehicle is equipped with
additional navigation, please refer
to the infotainment system manual
separately supplied.
WARNING
Never adjust the instrument cluster
whilst driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
OCN7040019L
[ The brightness of the instrument panel
illumination is displayed.
[ If the brightness reaches the
maximum or minimum level, an alarm
will sound.
WARNING
Never adjust the instrument cluster
whilst driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
Page 162 of 649
5-21
05
Tilt steering / Telescope
steering (if equipped)
WARNING
Never adjust the steering wheel whilst
driving. You may lose steering control
and cause severe personal injury, death
or accidents.
i Information
After adjustment, sometimes the lock-
release lever may not lock the steering
wheel.
, W L V Q R W D P D O I X Q F W L R Q 7 K L V R F F X U V Z K H Q
W Z R J H D U V D U H Q R W H Q J D J H G F R U U H F W O \ , Q
this case, adjust the steering wheel again
and then lock the steering wheel.
OBC3050007R
To change the steering wheel angle and
height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the
desired angle (2) and height (3, if
equipped). Move the steering wheel,
so it points toward your chest, not
toward your face. Make sure you can
see the instrument panel warning
lights and gauges.
3. Pull up the lock-release lever to lock
the steering wheel in place.
Push the steering wheel both up and
down to be certain it is locked in
position.
CAUTION
Whilst adjusting the steering wheel
height, please do not push or pull it
hard since the fixture can be damaged.
Page 183 of 649
5-42
Convenient features
Lighting control
OPDE046065
To operate the lights, turn the knob at
the end of the control lever to one of the
following positions:
(1) OFF (O) position
(2) AUTO light position (if equipped)
(3) Position light position
(4) Headlight position
OBC3050029
$ 8 7 2 O L J K W S R V L W L R Q L I H T X L S S H G
When the light switch is in the AUTO
position, the position light and headlight
will be turned ON or OFF automatically
depending on the amount of light
outside the vehicle.
Even with the AUTO light feature
in operation, it is recommended to
manually turn ON the lights when driving
at night or in a fog, or when you enter
dark areas, such as tunnels and parking
facilities.
NOTICE
[ ' R Q R W F R Y H U R U V S L O O D Q \ W K L Q J R Q W K H
sensor (1) located on the instrument
panel.
[ ' R Q R W F O H D Q W K H V H Q V R U X V L Q J
a window cleaner, the cleanser
may leave a light film which could
interfere with sensor operation.
[ , I \ R X U Y H K L F O H K D V Z L Q G R Z W L Q W R U
other types of metallic coating on
the front windscreen, the AUTO light
system may not work properly.
EXTERIOR LIGHTS
Page 184 of 649
5-43
05
OAE046469L
Position light position ()
The position light, license plate light and
instrument panel light are turned ON.
OAE046467L
+ H D G O L J K W S R V L W L R Q )
The headlight, position light, license
plate light and instrument panel light are
turned ON.
i Information
7 K H L J Q L W L R Q V Z L W F K P X V W E H L Q W K H 2 1
position to turn on the headlight.
High beam operation
OAE046453L
To turn on the high beam headlight,
push the lever away from you.
The high beam indicator will light when
the headlight high beams are switched
on.
To turn off the high beam headlight, pull
the lever towards you. The low beams
will turn on.
WARNING
Do not use high beam when there are
other vehicles approaching you. Using
high beam could obstruct the other
driver’s vision.
Page 201 of 649
5-60
Convenient features
OBC3N051101AU
, Q V W U X P H Q W S D Q H O Y H Q W V
The instrument panel vent air flow can
be directed up/down or left/right using
the vent adjustment lever.
To close the vent adjustment lever,
rotate it to the outer side till the end. To
open the vent, rotate it to the inner side.
Temperature control
OBC3050104
The temperature will increase by turning
the knob to the right.
The temperature will decrease by
turning the knob to the left.
Air intake control
OBC3050105
aThe air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).
5 H F L U F X O D W L R Q P R G H
When Recirculation mode
is selected, air from the
passenger compartment
will be recirculated
through the system and
heated or cooled
according to the function
selected.
) U H V K P R G H
When Fresh mode is
selected, air enters the
vehicle from outside and is
heated or cooled
according to the function
selected.
Page 210 of 649
5-69
05
OBC3050112R
The mode selection button controls the
direction of the air flow through the
ventilation system.
) D F H / H Y H O % '
Air flow is directed toward the upper
body and face. Additionally, each outlet
can be controlled to direct the air
discharged from the outlet.
) O R R U / H Y H O $ & '
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windscreen and
side window defrosters.
) O R R U ' H I U R V W $ & '
Most of the air flow is directed to the
floor and the windscreen with a small
amount directed to the side window
defrosters.
OBC3050113R
' H I U R V W / H Y H O $ '
Most of the air flow is directed to the
windscreen with a small amount of air
directed to the side window defrosters.
OBC3N051101AU
, Q V W U X P H Q W S D Q H O Y H Q W V
The instrument panel vent air flow can
be directed up/down or left/right using
the vent adjustment lever.
To close the vent adjustment lever,
rotate it to the outer side till the end. To
open the vent, rotate it to the inner side.
