2023 HYUNDAI I10 parking lights
[x] Cancel search: parking lightsPage 100 of 486
4-10
Instrument cluster
Anti-lock Brake
System (ABS) Warning
Light
7his warning light illuminates
‡ When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 3
seconds and then goes off.
‡ When there is a malfunction with
the ABS (The normal braking sys-
tem will still be operational without
the assistance of the anti-lock brake
system).
In this case, we recommend that
you have the vehicle inspected by a
HYUNDAI authorised repairer.
Electronic Brake Force
Distribution (EBD)
System Warning Light
7hese two warning lights illuminate
at the same time whilst driving
‡ When the ABS and regular brake
system may not work normally.
In this case, we recommend that
you have the vehicle inspected by a
HYUNDAI authorised repairer.
WARNING
Electronic Brake Force
Distribution (EBD) System
Warning Light
When both ABS and Parking Brake
& Brake Fluid Warning Lights are
on, the brake system will not work
normally and you may experience
an unexpected and dangerous sit-
uation during sudden braking.
In this case, avoid high speed driv-
ing and abrupt braking.
We recommend you have the vehi-
cle inspected by a HYUNDAI autho-
rised repairer as soon as possible.
i Information
- Electronic Brake Force
Distribution (EBD) System
Warning Light
When the ABS Warning Light is on or
both ABS and Parking Brake Brake
Fluid Warning Lights are on, the
speedometer, odometer, or tripmeter
may not work. Also, the (PS Warning
Light may illuminate and the steering
effort may increase or decrease.
In this case, we recommend you have
the vehicle inspected by a + < 8 1 'AI
authorised repairer as soon as possible.
Page 119 of 486
4-29
04
User settings mode
In this mode, you can change the set-
tings of the instrument cluster, doors,
lamps, etc.
1. Driver Assistance
2. Lights
3. Door
4. Convenience
5. Service interval
6. Other Features
7. Language
8. Reset
The information provided may dif-
fer depending on which functions
are applicable to your vehicle.
(ngage parking brake to edit set-
tings
This warning message illuminates if
you try to select an item from the User
Settings mode whilst driving.
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and press-
ing the P (Park) button.
4uick guide ( +elp)
This mode provides quick guides for
the systems in the User Settings
mode.
Select an item, press and hold the
OK button.
For more details about each sys-
tem, refer to this Owner’s Manual.
Page 169 of 486
5-41
05
Turn signals and lane change
signals
OHCR046350
To signal a turn, push down on the
lever for a left turn or up for a right
turn in position (A). To signal a lane
change, move the turn signal lever
slightly and hold it in position (B).
The lever will return to the OFF posi-
tion when released or when the turn
is completed.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
2ne-touch turn signal function
To activate a one-touch turn signal
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can activate or deactivate the
One Touch Turn Signal function or
choose the number of blinks (3, 5, or
7) from the User Settings Mode on
the LCD display. ) R U P R U H G H W D L O V
refer to “LCD Display Modes” in
chapter 4.
Front fog light (if equipped)
OHCR046362
Fog lights are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
1. Turn on the park light.
2. Move the light switch (1) to the
front fog light position.
3. To turn off the front fog light, turn
the light switch to the front fog light
position again or turn off the
Parking (Position) light
NOTICE
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
Page 171 of 486
5-43
05
NOTICE
If the driver exits the vehicle
through another door besides the
driver door, the battery saver func-
tion does not operate and the
headlight delay function does not
W X U Q 2 ) ) D X W R P D W L F D O O \
This may cause the battery to dis-
charge. To avoid battery dis-
F K D U J H W X U Q 2 ) ) W K H K H D G O L J K W V
manually from the headlight switch
before exiting the vehicle.
Daytime running light (DRL)
(if equipped)
The Daytime Running Lights (DRL)
can make it easier for others to see
the front of your vehicle during the
day, especially after dawn and before
sunset.
The DRL system will turn the dedi-
cated light OFF when:
1. The parking brake is applied.
2. The engine is turned off.
Headlight levelling device
OAC3059028R
7 R D G M X V W W K H K H D G O L J K W E H D P O H Y H O
according to the number of the pas-
sengers and loading weight in the
luggage area, turn the beam levelling
switch.
The higher the number on the switch
position, the lower the headlight
beam level. Always keep the head-
light beam at the proper levelling
position, or headlights may dazzle
other road users.
/ L V W H G E H O R Z D U H H [ D P S O H V R I D S S U R-
priate switch settings for varying
loads. For loading conditions other
W K D Q W K R V H O L V W H G D G M X V W W K H V Z L W F K
position to the most similar situation.
Loading conditionSwitch position
Driver only0
Driver + Front pas-
senger0
Full passengers
(including driver)1
Full passengers
(including driver) +
0 D [ L P X P S H U P L V V L E O H
loading2
' U L Y H U 0 D [ L P X P
permissible loading 3
Page 173 of 486
5-45
05
Front Room Lights
OAC3059029TU
: The front or rear room lights
come on when the front or
rear doors are opened if the
engine is running or not. When
doors are unlocked by the
remote key or smart key, the
front and rear lights come on
I R U D S S U R [ L P D W H O \ V H F R Q G V
as long as any door is not
opened. The front and rear
room lights go out gradually
D I W H U D S S U R [ L P D W H O \ V H F-
onds if the door is closed.
However, if the ignition switch
is in the ON position or all
doors are locked, the front and
rear lights will turn off. If a door
is opened with the ignition
switch in the ACC position or
the OFF position, the front and
rear lights stay on for about 20
minutes.
: With the Front Room Light in
this position, the front and rear
room lights remain on at all
times.
: With the Front Room Light in
this position the front and rear
room lights remain off at all
times.
Luggage compartment light
OAC3059063TU
The luggage compartment light comes
on when the tailgate is opened.
NOTICE
The luggage compartment comes
on as long as the tailgate lid is
open. To prevent unnecessary
charging system drain, close the
tailgate lid securely after using the
tailgate.
Glove box light (if equipped)
OAC3059030R
7 K H J O R Y H E R [ O L J K W F R P H V R Q Z K H Q
W K H J O R Y H E R [ L V R S H Q H G
The parking lights or headlights must
E H 2 1 I R U W K H J O R Y H E R [ O L J K W W R I X Q F-
tion.
Page 300 of 486
6-44
Whilst driving
The ISG system is to reduce the fuel
consumption by automatically shut-
ting down the engine, when the vehi-
cle is at a standstill (i.e. red stop light,
V W R S V L J Q D Q G W U D I I L F M D P
The engine is automatically started
upon satisfying the starting condi-
tions.
The ISG system is always active,
when the engine is running.
i Information
When the engine is automatically
started by the IS * system, some warn-
ing lights (i.e. ABS, ESC, ESC 2FF,
EPS, and parking brake warning light)
may illuminate for a few seconds due
to the low battery voltage. +owever, it
does not indicate a malfunction with
the IS * system.
To activate the ISG system
Prerequisite for activation
The ISG system operates in the fol-
lowing situations.
‡ 7 K H G U L Y H U‹ V V H D W E H O W L V I D V W H Q H G
Page 359 of 486
7-7
07
i , Q I R U P D W L R Q
3 E
An inappropriately disposed
battery can be harmful to the
environment and human
health. Dispose of the battery
according to your local law(s)
or regulations.
Jump starting procedure
1. Position the vehicles close enough
that the jumper cables will reach,
but do not allow the vehicles to
touch.
2. Avoid fans or any moving parts in
the engine compartment at all
times, even when the vehicles are
turned off.
3. Turn off all electrical devices such
as radios, lights, air conditioning,
etc. Put the vehicles in N (Neutral,
for Automated manual transmis-
sion vehicle) or neutral (for Manual
transmission vehicle), and set the
parking brakes. Turn both vehicles
OFF.
OAC3079002TU
4. Connect the jumper cables in the
exact sequence shown in the illus-
tration. First connect one jumper
cable to the red, positive (+) jump-
er terminal of your vehicle (1).
5. Connect the other end of the jump-
er cable to the red, positive (+) bat-
tery/jumper terminal of the assist-
ing vehicle (2).
6. Connect the second jumper cable
to the black, negative (-) battery/
chassis ground of the assisting
vehicle (3).
7. Connect the other end of the sec-
ond jumper cable to the black, neg-
ative (-) chassis ground of your
vehicle (4).
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over
the battery when making connec-
tions.
Page 446 of 486
8-50
Maintenance
& R Q V X O W D + < 8 1 ' $ , D X W K R U L V H G U H-
S D L U H U W R U H S O D F H P R V W Y H K L F O H O L J K W
E X O E V , W L V G L I I L F X O W W R U H S O D F H Y H K L F O H
O L J K W E X O E V E H F D X V H R W K H U S D U W V R I W K H
Y H K L F O H P X V W E H U H P R Y H G E H I R U H \ R X
F D Q J H W W R W K H E X O E 7 K L V L V H V S H F L D O O \
W U X H I R U U H P R Y L Q J W K H K H D G O L J K W D V-
V H P E O \ W R J H W W R W K H E X O E V
5 H P R Y L Q J L Q V W D O O L Q J W K H K H D G O L J K W D V-
V H P E O \ F D Q U H V X O W L Q G D P D J H W R W K H
vehicle.
WARNING
Prior to replacing a light, depress
the foot brake, move the shift lever
into the N (Neutral, for Automated
manual transmission vehicle) or
neutral (for manual transmission
vehicle), apply the parking brake,
place the ignition switch in the
LOCK/OFF position, and take the
key with you when leaving the ve-
hicle to avoid sudden movement
of the vehicle and to prevent pos-
sible electric shock.
Be aware the bulbs may be hot and
may burn your fingers.
NOTICE
Be sure to replace the burned-out
bulb with one of the same wattage
rating. Otherwise, it may cause
damage to the fuse or electric wir-
ing system.
i Information
The headlight and tail lamp lenses
could appear frosty if the vehicle is
washed after driving or the vehicle is
driven at night in wet weather. This
condition is caused by temperature dif-
ference between the lamp inside and
outside and, it does not indicate a
problem with your vehicle. When
moisture condenses in the lamp, it will
be removed after driving with the
headlight on. The removable level may
differ depending on lamp size, lamp
position and environmental condition.
However, if moisture is not removed,
we recommend that your vehicle is in-
spected by a HYUNDAI authorised re-
pairer.
i Information (For Europe)
Traffic Change
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direction,
this asymmetric part will dazzle on-
coming car driver. To prevent dazzle,
ECE regulation demand several tech-
nical solutions (ex. automatic change
system, adhesive sheet, down aiming).
These headlights are designed not to
dazzle opposite drivers. So, you need
not change your headlights in a coun-
try with opposite traffic direction.
LIGHT BULBS