2023 GENESIS G90 jump cable

[x] Cancel search: jump cable

Page 326 of 676

GENESIS G90 2023  Owners Manual 6-16
Driving Your Vehicle
 CAUTION
When you start after stopping on a 
steep incline, even if the gear is in 
D (Drive), if you do not depress the 
accelerator or brake pedal, the vehicle 
may roll ba

Page 379 of 676

GENESIS G90 2023  Owners Manual 6-69
06
The severe weather conditions of winter 
quickly wear out tires and cause other 
problems. To minimize winter driving 
problems, you should take the following 
suggestions:
Snow or Icy Conditi

Page 384 of 676

GENESIS G90 2023  Owners Manual 6-74
Driving Your Vehicle
Do not let ice and snow accumulate 
underneath
Under some conditions, snow and ice 
can build up under the fenders and 
interfere with the steering. When driving 
in such con

Page 571 of 676

GENESIS G90 2023  Owners Manual 8-4
Emergency Situations
Jump starting can be dangerous if done 
incorrectly. Follow the jump starting 
procedure in this section to avoid serious 
injury or damage to your vehicle. If in 
doubt about

Page 572 of 676

GENESIS G90 2023  Owners Manual 8-5
08
 Jump Starting Procedure
 Information
Your vehicle has a battery in the luggage 
compartment, but when you jump start 
your vehicle, use the jumper terminal in 
the engine compartment.
1.  Posi

Page 573 of 676

GENESIS G90 2023  Owners Manual 8-6
Emergency Situations
10. Start the engine of the assisting 
vehicle and let it run at approximately 
2,000 RPM for a few minutes. Then 
start your vehicle.
11. Keep your vehicle operating for at

Page 626 of 676

GENESIS G90 2023  Owners Manual 9-28
Maintenance
 WARNING
To prevent SERIOUS INJURY or DEATH 
to you or bystanders, always follow 
these precautions when working near 
or handling the battery:
Always read and follow 
instructions ca

Page 629 of 676

GENESIS G90 2023  Owners Manual 9-31
09
Battery Recharging
By battery charger
Should your vehicles battery become 
discharged either run the engine for 
at least 60 minutes driving or at idle. 
Alternatively you may connect a fully