2023 GENESIS G90 ECO mode

6-55
06
Coasting Release Conditions
The Coasting function will be
automatically released when the
following conditions are met.

[Comfort or Sport is selected for
driving mode

[The driver uses the paddle shifter

[Smart Cruise Control is activated (Set
speed appears on the cluster)

[The vehicle’s speed exceeds 30~100
mph (50~160 km/h) range

[The road gradient is under -5% or over
+5%

[If the distance between the vehicle
ahead is too close or the relative
speed changes momentarily in Smart
mode

[If lane change is predicated in Smart
mode (for example, the turn signal is
turned ON or a LKA warning appears
due to steering wheel control, etc.)
Information
It is recommended to turn off the
Coasting function if you are driving under
frequently stop-and-go condition. Change
the drive mode to Comfort or Sport or
deselect Coasting from the infotainment
system screen.
NOTICE

[If the accelerator pedal is pressed
quickly for accelerating with the
Coasting function in operation,
acceleration may occur after the
engagement of the clutch inside the
transmission. In turn, the driver may
continue to feel acceleration even
after the system is turned off.

[Driving with the Coasting function
off may be required in some cases
since the engine brake is not applied
while the Coasting function is
operating.

[Operating the infotainment system
screen to activate or deactivate
the Coasting function while driving
may be dangerous as the driver’s
attention is dispersed.

6-60
Driving Your Vehicle
Predictive shift in roundabout
If there is a roundabout ahead, the
predictive shift downshifts the gear
before entering the roundabout to assist
the driver to go through the roundabout
smoothly and reaccelerate the vehicle.
Predictive shift to accelerate when
entering highways (Interchange/Junction)
When entering the main road of
highways, the drive mode is temporarily
changed to SMART SPORT at the
interchange or junction to assist the
vehicle to accelerate easily.
-It also operates when entering an
expressway.
-While the SMART SPORT mode is
on, the red ‘SMART’ message will
illuminate on the instrument cluster.
-The drive mode will revert back to
SMART ECO or SMART COMFORT
when the vehicle has completely
entered the highways.
-Predictive shift operates only when
the vehicle is accelerated sufficiently
at the highways interchange or
junction to enter the main road. It
does not operate if the vehicle speed
is low.
-When entering the highways ramp
with the vehicle in SMART ECO mode,
the drive mode will automatically
change to SMART COMFORT. The
white ‘SMART’ message will illuminate
on the cluster.
-When predictive shift is operating, the
acceleration performance is equal to
that of when SPORT mode is selected
by pressing the drive mode button.
Predictive shift when approaching a
vehicle ahead
If the speed of the vehicle ahead is low
and the distance is getting closer, the
engine brake is engaged automatically to
assist in deceleration.
-When the vehicle reaches an
appropriate distance and the speed is
equal to the vehicle ahead, predictive
shift will be finished.
-If the brake or accelerator pedal
is depressed while predictive shift
is operating, the function will be
temporarily disabled.
-If there is a large difference of speed
from the vehicle ahead, the engine
brake may be engaged greatly to
obtain appropriate vehicle-to-vehicle
distance.
CAUTION
‘Predictive Shift when Approaching
to Vehicle Ahead’ is a function to
assist deceleration by detecting
the speed difference with the
vehicle ahead and does not directly
prevent collision. If the vehicle
ahead abruptly decelerates and
the distance rapidly decreases, the
driver must depress the brake pedal
to decelerate.

6-61
06
Selecting Drive Mode
Drive mode may be selected according
to the driver's preference or road
condition.
Changing drive mode (ECO,
COMFORT, SPORT)
Shortly press the DRIVE MODE button
to change among ECO, COMFORT and
SPORT.
ORS061024
The drive mode changes as below
whenever the DRIVE MODE button is
pressed.
-(&2

6-62
Driving Your Vehicle
ECO, COMFORT, SPORT Mode
Features
ECO mode (if equipped)
ECO mode helps improve fuel
efficiency for eco-friendly
driving.
Fuel efficiency varies according
to the driver's driving habit and
road condition.

[When ECO mode is selected, the
ECO indicator will illuminate on the
instrument cluster.

[When ECO mode is activated:
-The acceleration response may be
slightly reduced if the accelerator
pedal is depressed moderately.
-The air conditioner performance
may be limited.
-The shift pattern of the automatic
transmission may change.
-Engine noise may be louder at some
automatic transmission shifts as
down-shift requires pressing down
more on the accelerator.
The above situations are normal
conditions when ECO mode is activated
to help improve fuel efficiency.
COMFORT mode
COMFORT mode provides smooth
driving and comfortable riding.
SPORT mode
SPORT mode provides sporty
but firm riding.
In SPORT mode, the fuel
efficiency may decrease.

[When SPORT mode is selected, the
SPORT indicator will illuminate on the
instrument cluster.

[Whenever the engine is restarted,
the drive mode will revert back to
COMFORT mode. If SPORT mode is
desired, re-select SPORT mode.

[When SPORT mode is activated:
-The engine RPM will tend to remain
raised over a certain length of time
even after releasing the accelerator
-Upshifts are delayed when
accelerating
NOTICE
In the SPORT mode, the fuel efficiency
may decrease.

6-63
06
CUSTOM Mode Features
SMART mode
SMART mode selects the proper driving
mode among SMART ECO, SMART
COMFORT and SMART SPORT by judging
the driver's driving habits (for example,
mild or dynamic) from the brake pedal
depression or the steering wheel
operation.
Various driving situations, which you may
encounter in SMART mode

[The driving mode automatically
changes to ECO mode after a certain
period of time, when you gently
depress the accelerator pedal (Your
driving is categorized to be mild.).

[The driving mode automatically
changes from SMART ECO mode
to SMART COMFORT mode after a
certain period of time, when you
sharply or repetitively depress the
accelerator pedal.

[The driving mode automatically
changes to SMART COMFORT mode
with the same driving patterns, when
the vehicle starts to drive on an
upward slope of a certain angle. The
driving mode automatically returns to
SMART ECO mode, when the vehicle
enters a leveled road.

[The driving mode automatically
changes to SMART SPORT mode
only in harsh driving situations. In
most of the normal driving situations,
the driving mode sets to be either
in SMART ECO mode or in SMART
COMFORT mode.
[The driving mode automatically
changes to SMART SPORT, when
you abruptly accelerate the vehicle
or repetitively operate the steering
wheel (Your driving is categorized
to be sporty.). In this mode, your
vehicle drives in a lower gear for
abrupt accelerating or decelerating
and increases the engine brake
performance.
For general description of SMART ECO,
SMART COMFORT, and SMART SPORT
modes, refer to “ECO, COMFORT, SPORT
mode features”.

6-64
Driving Your Vehicle
Limitation of SMART mode
SMART may be limited in following
situations. ECO, COMFORT, SPORT mode
features

[The driver is using the paddle shifter
to manually shift gear. (The system
prioritizes the driver’s manual shifting)

[Smart Cruise Control is activated.

[The transmission oil temperature is
either extremely low or extremely
high.
Information

[When you mildly drive the vehicle
in SMART mode, the driving mode
changes to ECO mode to improve fuel
efficiency. However, the actual fuel
efficiency may differ depending on your
driving situations such as slope angle,
and vehicle speed.

[When you dynamically drive the
vehicle in SMART mode by abruptly
decelerating or sharply curving, the
driving mode changes to SPORT mode.
However, it may adversely affect fuel
economy.
CHAUFFEUR mode
CHAUFFEUR mode controls the
suspension, engine, transmission, and
steering wheel to provide comfort driving
experience to rear seat passengers.
MY DRIVE MODE
MY DRIVE mode will allow the driver to
personalize the setting of the powertrain,
steering wheel, suspension, and AWD.
7RVHW0<'5,9(PRGHJRWR
S6HWXS

9-44
Maintenance
Vehicle placard
A label permanently attached
to a vehicle showing the
original equipment tire size and
recommended inflation pressure.
All Season Tires
Genesis Branded Vehicle specifies
all season tires on some models to
provide good performance for use
all year round, including snowy and
icy road conditions. All season tires
are identified by ALL SEASON and/
or M+S (Mud and Snow) on the tire
sidewall. Snow tires have better
snow traction than all season tires
and may be more appropriate in
some areas.
Snow Tires
If you equip your car with snow
tires, they should be the same size
and have the same load capacity as
the original tires. Snow tires should
be installed on all four wheels;
otherwise, poor handling may result.
Snow tires should carry 4 psi (28 kPa)
more air pressure than the pressure
recommended for the standard
tires on the tire label on the driver’s
side of the center pillar, or up to the
maximum pressure shown on the tire
sidewall, whichever is less. Do not
drive faster than 75 mph (120 km/h)
when your vehicle is equipped with
snow tires.
Radial-Ply Tires
Radial-ply tires provide improved
tread life, road hazard resistance
and smoother high speed ride. The
radial-ply tires used on this vehicle
are of belted construction, and are
selected to complement the ride
and handling characteristics of
your vehicle. Radial-ply tires have
the same load carrying capacity,
as bias-ply or bias belted tires of
the same size, and use the same
recommended inflation pressure.
Mixing of radial-ply tires with
bias-ply or bias belted tires is not
recommended. Any combinations of
radial-ply and bias-ply or bias belted
tires when used on the same vehicle
will seriously deteriorate vehicle
handling. The best rule to follow
is: Identical pairs of radial-ply tires
should always be used as a set for
the front tires and a set for the rear
tires.
Longer wearing tires can be more
susceptible to irregular tread wear.
It is very important to follow the tire
rotation interval in this chapter to
achieve the tread life potential of
these tires. Cuts and punctures in
radial-ply tires are repairable only in
the tread area, because of sidewall
flexing. Consult your tire dealer for
radial-ply tire repairs.
WARNING
Do not mix bias ply and radial ply
tires under any circumstances.
This may cause unusual handling
characteristics that may cause loss
of vehicle control resulting in an
accident.