2023 GENESIS G90 seat adjustment

3-15
03
Seat sliding, seatback angle and seat
cushion tilt adjustment (if equipped)
ORS031094
ORS032150N
Adjusting seat position and vertical height

[Control switch (Type A)
- Seat position adjustment: Slide the
switch M forward or backward to
adjust seat position.
- Seat height adjustment: Push down
or pull up the switch M to adjust
seat height.

[Armrest touchscreen (Type B)
1. Press
on the left side of
the menu from the armrest
touchscreen.
- Seat adjustment screen is
displayed.
2. Touch the lower part adjustment
button and adjust the seat position
and cushion angle.
Seatback angle

[Control Switch (Type A)
Slide the switch N forward or
backward to adjust seatback angle.

[Armrest touchscreen (Type B)
1. Press
on the left side of
the menu from the armrest
touchscreen.
- Seat adjustment screen is
displayed.
2. Touch the center part adjustment
button and adjust the seatback
angle.
Lumbar support adjustment (if
equipped)
ORS032021N
1. Press on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Press the adjustment button on the
center of the rear seat to adjust, then
select lumbar support function from
the menu.
3. Touch the arrows to adjust the
position of the lumbar support.

3-16
Safety System
Adjusting seat bolster (if equipped)
ORS032022N
1. Press on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Press the adjustment button on the
center of the rear seat to adjust, then
select seat bolster function from the
menu.
3. Touch the arrows to adjust the
position of the seat bolster.
Walk-in switch (if equipped)
ORS031104
Seating position, seatback angle and
cushion angle of the front passenger seat
can be adjusted by operating the rear
seat control switches.
1. Press the walk-in device switch on the
center armrest of rear seat.

[Indicator light on the walk-in device
switch illuminates.
2. Operate the rear seat control switch to
adjust the front passenger seat.

[ For more information refer to the
“Front Seats” section in this chapter.

[Press the switch again to turn off
the walk-in device.

[If you do not adjust the front
passenger seat within 15 seconds
after pressing the walk-in
switch, the front passenger seat
adjustment function automatically
turns off.
WARNING
Do not adjust the passenger seat when
a passenger is seated.

3-17
03
Easy access switch (for passenger’s
Seat) (if equipped)
ORS032109N
ORS032023N
9HKLFOHVHTXLSSHGZLWK,QWHJUDWHG
Memory System
The seats can automatically move
backward by opening the rear door with
the rear seats moved forward.
1. Press
on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Touch either the right, or left seat
adjustment button M on the rear seat.
3. Press the DOOR button.

[The indicator light on the button
illuminates and easy access
function for entrance/exit is
enabled.
VIP seat (if equipped)
ORS032024N
The rear seat occupant can adjust the
VIP seat and front passenger seats for
VIP convenience. The front and rear
passenger seats are also adjustable
through the armrest touchscreen.
Information

[Convenience features of the rear left
seat is not available under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the convenience
features of the rear left seat may
vary depending on the position of the
driver’s seat.

3-18
Safety System
VIP seat mode switches (if
equipped)
ORS031025
ORS032154N
A : Control switch,
B : Armrest touchscreen,
L : Rear seat (Left),
R : Rear seat (Right)
You can automatically adjust the seat for
comfort or various in-vehicle activities.
1. Press
on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Press and hold the appropriate mode
for your activity.

[Relax (REST) mode, Reading mode,
Return mode.
Relax (REST) Mode
The front and rear passenger seats are
automatically adjusted for comfort. Press
and hold button M on the rear door or
on the armrest touchscreen. Each seat is
adjusted automatically as below.

[Rear left seat
-6HDWEDFNWLOWVEDFNZDUG

3-19
03
NOTICE

[Do not press the Relax (REST) mode
switch again while operating the
seat positions for Relax (REST)
mode. It may abruptly stop the seat
movement.

[When you operate the seat control
switch while adjusting the seat
positions for the Relax (REST) mode,
it stops the automatic seat position
adjustment. In this case, manually
adjust the seat positions.

[Any items, which occupy the front
passenger's seat, may get damaged
while automatically adjusting the
seat positions for the Relax (REST)
mode. Do not put any items on the
front passenger's seat.
Information

[Relax (REST) mode switches for
adjusting the front passenger’s seat do
not operate in the following situations
when:
-The Engine Start/Stop button is in
the OFF position.
-A passenger occupies the front
passenger’s seat.
-An item occupies the front
passenger’s seat.
-The front passenger’s door is open.
-The front passenger’s seatbelt is
fastened.

[Relax (REST) mode for rear left seat
is unavailable under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the Relax (REST)
mode of the rear left seat may vary
depending on the position of the
driver’s seat.
Information

[The seat position changes to Relax
(REST) mode while the button M is
pressed. The seat stops moving when
the button M is released.

[The forward and rearward position for
the rear seats are adjusted based on its
current position. The starting position
may differ.

[Operating the seat control switch while
the seat is being adjusted for Relax
(REST) mode stops the seats from
moving.
To adjust the seats again, use the
control switch and adjust manually.

3-21
03
Information
Return function switch for adjusting the
front passenger's seat do not operate in
the following situations when:

[The Engine Start/Stop button is in the
OFF position.

[A passenger occupies the front
passenger's seat.

[An item occupies the front passenger's
seat.

[The front passenger's door is open.

[The front passenger's seatbelt is
fastened.
Information

[The seat position changes to Return
mode while the button O is pressed.
The seat stops moving when the button
O is released.

[Operating the seat control switch while
the seat is being adjusted for Return
mode stops the seats from moving.
To adjust the seats again, use the
control switch and adjust manually.
Calf support adjustment (if equipped)
ORS031027
ORS032155N
Place your leg on the calf support and
adjust its angle to relax.

[Control switch (Type A)
Slide the calf support switch
diagonally upward or downward to
adjust the angle.

[Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the lower part of the rear seat to
be adjusted, and select the calf
support function.
3. Press the arrows of the desired
direction to adjust the angle of the
calf support.

3-25
03
Front seat head restraints
ORS031141L
The driver’s and front passenger’s seats
are equipped with adjustable head
restraints for the passengers safety and
comfort.
ORS031013
Adjusting the height up and down
1. Push the control switch up to raise or
down to lower the head restraint.
2. Release the switch once the head
restraint reaches the desired position.
ORS031012
Forward and rearward adjustment
1. Push the control switch forward
orrearward to move the head restraint.
2. Release the switch once the head
restraint reaches the desired position.
NOTICE
ORS031131
If you recline the seatback towards the
front with the head restraint and seat
cushion raised, the head restraint may
come in contact with the sunvisor or
other parts of the vehicle.

3-26
Safety System
ORS031093
Removal/Reinstall
To remove the head restraint:
1. Recline the seatback O with the
seatback angle switch M.
2. Raise the head restraint as far as it can
go N.
3. Insert a thin-pointed tool into the
head restraint adjustment pole P and
then remove the head restraint Q.
WARNING
NEVER allow anyone to travel in a seat
with the head restraint removed.
ORS031014
To reinstall the head restraint:
1. Recline the seatback.
2. Push the head restraint height control
switch M up as far as it can go.
3. Put the head restraint poles into the
holes N.
4. Adjust the head restraint to the
appropriate height O.
5. Recline the seatback Q using the
seatback angle switch P.
WARNING
Always make sure the head restraint
locks into position after reinstalling and
adjusting it properly.