2023 GENESIS G90 belt

3-19
03
NOTICE

[Do not press the Relax (REST) mode
switch again while operating the
seat positions for Relax (REST)
mode. It may abruptly stop the seat
movement.

[When you operate the seat control
switch while adjusting the seat
positions for the Relax (REST) mode,
it stops the automatic seat position
adjustment. In this case, manually
adjust the seat positions.

[Any items, which occupy the front
passenger's seat, may get damaged
while automatically adjusting the
seat positions for the Relax (REST)
mode. Do not put any items on the
front passenger's seat.
Information

[Relax (REST) mode switches for
adjusting the front passenger’s seat do
not operate in the following situations
when:
-The Engine Start/Stop button is in
the OFF position.
-A passenger occupies the front
passenger’s seat.
-An item occupies the front
passenger’s seat.
-The front passenger’s door is open.
-The front passenger’s seatbelt is
fastened.

[Relax (REST) mode for rear left seat
is unavailable under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the Relax (REST)
mode of the rear left seat may vary
depending on the position of the
driver’s seat.
Information

[The seat position changes to Relax
(REST) mode while the button M is
pressed. The seat stops moving when
the button M is released.

[The forward and rearward position for
the rear seats are adjusted based on its
current position. The starting position
may differ.

[Operating the seat control switch while
the seat is being adjusted for Relax
(REST) mode stops the seats from
moving.
To adjust the seats again, use the
control switch and adjust manually.

3-21
03
Information
Return function switch for adjusting the
front passenger's seat do not operate in
the following situations when:

[The Engine Start/Stop button is in the
OFF position.

[A passenger occupies the front
passenger's seat.

[An item occupies the front passenger's
seat.

[The front passenger's door is open.

[The front passenger's seatbelt is
fastened.
Information

[The seat position changes to Return
mode while the button O is pressed.
The seat stops moving when the button
O is released.

[Operating the seat control switch while
the seat is being adjusted for Return
mode stops the seats from moving.
To adjust the seats again, use the
control switch and adjust manually.
Calf support adjustment (if equipped)
ORS031027
ORS032155N
Place your leg on the calf support and
adjust its angle to relax.

[Control switch (Type A)
Slide the calf support switch
diagonally upward or downward to
adjust the angle.

[Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the lower part of the rear seat to
be adjusted, and select the calf
support function.
3. Press the arrows of the desired
direction to adjust the angle of the
calf support.

3-31
03
Pre-active Safety Seat (PSS) (if
equipped)
When Pre-active Safety Seat detects
a collision or hazardous situation, it
provides safety by repositioning the seat
as follows:

[Seatback (power passenger seat and
rear seat): Raises the seatback when
reclined.

[Seat cushion (power rear seat): If
the cushion height is low, raises the
cushion.
WARNING
Pre-active Safety Seat is a
supplementary device. The driver
should keep their eyes on the road and
verify that there are no obstructions
ahead. If there are no passengers or the
seatbelts are not fastened, the system
will not function.
System operation

[Pre-active Safety Seat limits
passenger’s movement and helps
decrease the chance of injury by
raising the seatback right before
collision to tighten the seatbelt.
The system may operate under the
following situations:
- The brake pedal was depressed
abruptly.
- The vehicle is difficult to control.
- Collision risk is considered high by
the vehicle distance sensor.
[Pre-active Safety Seat helps prevent
the passenger from leaning forward
or to the side by raising the seatback
during sudden braking or rapid
turning to tighten the seatbelt.
The system may operate under the
following situations:
- The upper body is leaned forward
due to sudden braking.
- The upper body is leaned to the side
due to rapid turning.
- Driving on a slippery icy road.
- There is high risk of a rollover.
System pause
If the passenger adjusts the seat
manually, the system stops immediately.
However, it restarts to operate after 5
seconds when the hazardous situation
continues.
System malfunction
If the Pre-active Safety Seat system does
not operate properly, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.

3-39
03
SEAT BELTS
This section describes how to use the
seat belts properly. It also describes
some of the things not to do when using
seat belts.
Seat Belt Safety Precautions
Always fasten your seat belt and make
sure all passengers have fastened their
seat belts before starting any trip. Air
bags are designed to supplement the
seat belt as an additional safety device,
but they are not a substitute. Most states
require all occupants of a vehicle to wear
seat belts.
WARNING
Seat belts must be used by ALL
passengers whenever the vehicle is
moving. Take the following precautions
when adjusting and wearing seat belts:

[Children under the age of 13 should
be properly restrained in the rear
seats.

[Never allow children to ride in the
front passenger seat, unless the
air bag is deactivated. If a child is
seated move the seat as far back as
possible. And the child must always
be restrained in the seat properly.

[NEVER allow an infant or child to be
carried on an occupant’s lap.

[NEVER ride with the seatback
reclined when the vehicle is moving.

[Do not allow children to share a seat
or seat belt.

[Do not wear the shoulder belt under
your arm or behind your back.
[Never wear a seat belt over fragile
objects. If there is a sudden stop or
impact, the seat belt can damage it.

[Do not use the seat belt if it is
twisted. A twisted seat belt will not
protect you properly in an accident.

[Do not use a seat belt if the webbing
or hardware is damaged.

[Do not latch the seat belt into the
buckles of other seats.

[NEVER unfasten the seat belt
while driving. This may cause loss
of vehicle control resulting in an
accident.

[Make sure there is nothing in the
buckle interfering with the seat
belt latch mechanism, because any
materials in the buckle can cause the
seat belt not to be fastened securely.

[No modifications or additions
should be made by the user which
will either prevent the seat belt
adjusting devices from operating to
remove slack, or prevent the seat
belt assembly from being adjusted to
remove slack.
WARNING
Damaged seat belts and seat belt
assemblies will not operate properly.
Always replace:

[Frayed, contaminated, or damaged
webbing.

[Damaged hardware.

[The entire seat belt assembly after it
has been worn in an accident, even
if damage to webbing or assembly is
not apparent.

3-40
Safety System
Seat Belt Warning Light
Front seat belt warning
ORS031046
As a reminder to the driver and front
passenger, the seat belt warning light will
illuminate for approximately 6 seconds
each time the Engine Start/Stop button
is in the ON position regardless of belt
fastening.
If the seat belt is not fastened, the
warning chime will sound for about 6
seconds and the waning light will stay
ON until the seat belt is fastened.
If the seat belt is not fastened, when
vehicle speed is between 5.5 mph (9
km/h) and 12 mph (20 km/h) the warning
light will continue to illuminate and
warning chime will sound until the seat
belt is fastened.
If the seat belt is not fastened, when
vehicle speed is above 12 mph (20 km/h),
the warning light will blink and warning
chime will sound for approximately 100
seconds. (warning chime will sound in
three stages)
WARNING
Riding in an improper position
adversely affects the front passenger’s
seat belt warning system. It is important
for the driver to instruct the passenger
to be seated properly as instructed in
this manual.
Information

[Although the front passenger seat is not
occupied, the seat belt warning light
will blink or illuminate for 6 seconds.

[The front passenger’s seat belt warning
may operate when luggage is placed on
the front passenger seat.

3-41
03
Seat Belt Restraint System
WARNING
Improperly positioned seat belts may
increase the risk of serious injury
in an accident. Take the following
precautions when adjusting the seat
belt:

[Position the lap portion of the seat
belt as low as possible across your
hips, not on your waist, so that it fits
snugly.

[Position one arm under the shoulder
belt and the other over the belt, as
shown in the illustration.

[Always position the shoulder belt
anchor into the locked position at the
appropriate height.

[NEVER position the shoulder belt
across your neck or face.
Seat Belt-Driver’s 3-point
System with Emergency Locking
Retractor
Lap/shoulder belt
ORS031126
To fasten your seat belt:
Pull it out of the retractor and insert the
metal tab M into the buckle N. There will
be an audible “click” when the tab locks
into the buckle.
ORS031130
You should place the lap belt M portion
across your hips and the shoulder belt N
portion across your chest.
The seat belt automatically adjusts to the
proper length after the lap belt portion
is adjusted manually so that it fits snugly
around your hips. If you lean forward in
a slow, easy motion, the belt will extend
and move with you.
If there is a sudden stop or impact, the
belt will lock into position. It will also lock
if you try to lean forward too quickly.

3-42
Safety System
NOTICE
If you are not able to smoothly pull
enough of the seat belt out from the
retractor, firmly pull the seat belt out
and release it. After release, you will be
able to pull the belt out smoothly.
WARNING
ORS031127
Improperly positioned seat belts may
increase the risk of serious injury
in an accident. Take the following
precautions when adjusting the seat
belt:

[Position the lap portion of the seat
belt as low as possible across your
hips, not on your waist, so that it
fits snugly. This allows your strong
pelvic bones to absorb the force of
the crash, reducing the chance of
internal injuries.

[Position one arm under the shoulder
belt and the other over the belt, as
shown in the illustration.

[Always position the shoulder belt
anchor into the locked position at the
appropriate height.

[Never position the shoulder belt
across your neck or face.
Height adjustment
You can adjust the height of the shoulder
belt anchor to one of the four different
positions for maximum comfort and
safety.
The shoulder portion should be adjusted
so it lies across your chest and midway
over your shoulder nearest the door, not
over your neck.
ORS031047
Front seat:
To adjust the height of the seat belt
anchor, lower or raise the height adjuster
into an appropriate position.
To raise the height adjuster, pull it up
M. To lower it, push it down O while
pressing the height adjuster button N.
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has lock into
position.

3-43
03
ORS031128
To release your seat belt:
Press the release button M in the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen, check
the belt to be sure it is not twisted, then
try again.
Rear center seat belt (if equipped)
ORS031048L
1. Take out the buckle N, which is stored
between the seat/seatback cushions.
2. Insert the metal plate M into the
buckle N, until it clicks.
You can make sure its secure
fastening by pulling the seatbelt
webbing. The buckle with ‘CENTER’
mark should be used for the 3-point
seatbelt.
3. Restore the buckle between the seat/
seatback cushion after unfastening
the seatbelt.
Pre-tensioner seat belt
ORS031103
Your vehicle is equipped with driver’s and
front passenger’s and rear passengers
Pre-tensioner Seat Belts (Retractor
Pre-tensioner). The purpose of the pre-
tensioner is to make sure the seat belts
fit tightly against the occupant’s body
in certain frontal or side collision(s).
The pre-tensioner seat belts may be
activated in crashes where the frontal
or side collision(s) is severe enough,
together with the air bags.
When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position.
In certain frontal collisions, the pre-
tensioner will activate and pull the seat
belt into tighter contact against the
occupant’s body.
If the system senses excessive tension
on the driver or passenger’s seat belt
when the pre-tensioner system activates,
the load limiter inside the retractor
pre-tensioner will release some of the
pressure on the affected seat belt.