WHEEL NUTS
WARNING: When you install awheel, always remove any corrosion, dirtor foreign materials present on themounting surfaces of the wheel or thesurface of the wheel hub, brake drum orbrake disc that contacts the wheel. Make
sure to secure any fasteners that attachthe rotor to the hub so they do notinterfere with the mounting surfaces ofthe wheel. Installing wheels withoutcorrect metal-to-metal contact at thewheel mounting surfaces can cause thewheel nuts to loosen and the wheel tocome off while your vehicle is in motion,resulting in loss of vehicle control,personal injury or death.
lb.ft (Nm)1Bolt Size
150 lb.ft (204 Nm)M14 x 1.5
1 Torque specifications are for nut and bolt threads free of dirt and rust. Use only ourrecommended replacement fasteners.
Retighten the lug nuts to the specified torque within 100 mi (160 km) after any wheeldisturbance, such as tire rotation, changing a flat tire or wheel removal.
Hub pilot bore.A
Inspect the wheel pilot hole andmounting surface prior to installation.Remove any visible corrosion or looseparticles.
365
2023 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202209, DOMChanging a Road WheelE145950
Multi-Point Inspection
Radiator, cooler, heater and air conditioninghoses12V Battery performance
Suspension components for leaks ordamageExterior lamps and hazard warning systemoperation
Steering and linkageFluid levels; fill if necessary1
Tires for wear and proper pressure 2For fluid leaks
Windshield for cracks, chips or pitsHalf-shaft dust boots
Washer spray and wiper operationHorn operation
1 Brake, coolant recovery reservoir and window washer.2 Your vehicle is equipped with a temporary mobility kit; check the tire sealant expirationUse By date on the canister. Replace as needed.
Be sure to ask your dealership serviceadvisor or technician about the multi-pointvehicle inspection. It is a comprehensiveway to perform a thorough inspection ofyour vehicle. Your checklist gives youimmediate feedback on the overallcondition of your vehicle.
NORMAL SCHEDULED MAINTENANCE
Normal Scheduled Maintenance 1
Rotate tires, inspect tire wear and measure tread depth.Every 12 months or10,000 mi (16,000 km).Perform multi-point inspection (recommended).
Inspect brake pads, shoes, rotors, drums, brake linings,hoses and parking brake.
Inspect cooling system level, strength and hoses.
Inspect half-shaft boots.
412
2023 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202209, DOMScheduled Maintenance
