2023 FORD BRONCO run flat

Note:If you have removed the impactedmaterial from the wheels and your vehiclestill has a vibration check your vehicle fordamage or see an authorized dealer.
Inspect the exhaust system for damage orlooseness.
Make sure that the brakes are in properworking order and free of any mud, stonesand debris, which can become trappedaround the brake rotor, backing plate andcaliper.
Inspect the wheels for dents, cracks, orother damage.
Inspect undercarriage fasteners. If any areloose or damaged, tighten or replaceensuring that the proper torquespecification is used.
Inspect for torn or punctured boots on balljoints, half shafts, steering gears.
Refit the front license plate if removedpreviously.
COLD WEATHER
PRECAUTIONS
The functional operation of somecomponents and systems can be affectedat temperatures below approximately-13°F (-25°C).
BREAKING-IN
Your vehicle requires a break-in period. Forthe first 1,000 mi (1,600 km), avoid drivingat high speeds, heavy braking, aggressiveshifting or using your vehicle to tow. Duringthis time, your vehicle may exhibit someunusual driving characteristics.
DRIVING ECONOMICALLY
The following helps to improve fuelconsumption:
•Drive smoothly, accelerate gently andanticipate the road ahead to avoidheavy braking.
•Regularly check your tire pressures andmake sure that they are inflated to thecorrect pressure.
•Follow the recommended maintenanceschedule and carry out therecommended checks.
•Plan your journey and check the trafficbefore you set off. It is more efficientto combine errands into a single tripwhenever possible.
•Avoid idling the engine in cold weatheror for extended periods. Start theengine only when you are ready to setoff.
•Do not carry unnecessary weight in yourvehicle as extra weight wastes fuel.
•Do not add unnecessary accessoriesto the exterior of your vehicle, forexample running boards. If you use aroof rack, remember to fold it down orremove it when not in use.
•Do not shift into neutral when you arebraking or when your vehicle is slowingdown.
•Shut all windows when driving at highspeeds.
•Switch off all electric systems whennot in use, for example air conditioning.Make sure that you unplug anyaccessories from the auxiliary powerpoints when not in use.
326
2023 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202208, DOMDriving Hints

2.Inspect and clean debris from the rockrail at the running board bolt mountingnuts and keyhole slots.
WARNING: If the rock rail orrunning board mounting nuts in the rockrail appear to be damaged, do not installthe running board. Failure to follow thisinstruction could result in personal injury.
3.Locate the tool pouch and remove thehex tool and the running boardmounting bolts.
4.Grab the running board for theappropriate side near the front and rearof the running board.
5.Align the temporary support pins onthe front and middle mounting tabs tothe larger opening of the keyhole slotson the rock rail.
6.Tilt the running board up or down sothat the running board mounting tabsare even with the surface of the rockrail.
7.Move the running board toward thevehicle so that the mounting tabs areflat against the rock rail and thetemporary support pins go through thelarger opening in the keyhole slots.
8.Slide the running board to the rear ofthe vehicle and down to engage thetemporary support pins on the runningboard into the narrow part of keyholeslot on the rock rail.
9.Make sure that both the front andmiddle mounting tab temporarysupport pins have engaged the keyholeslot before letting go of running board.
Note:Mounting nuts in the rock rail shouldbe fully visible through running boardmounting tab holes.
10.Install one of the running board boltsinto the rear upper hole on the rearmounting tab of the running board.This ensures all the other mountingtab holes line up.
11.Use the hex tool to tighten the bolt.
WARNING: If all running board tabsdo not sit flush against the rock rail, donot install the running board. It could bean indication that the rock rail has beendamaged. Installation of the remainingbolts could damage running board,mounting brackets, or cause furtherdamage to rock rail. Failure to follow thisinstruction could result in personal injury.
400
2023 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202208, DOMRemovable Vehicle ComponentsE366680 E366681

12.To make sure the temporarymounting pins are properly engagedwith the rock rail, the three runningboard tabs must be flush against therock rail.
13.Install a bolt on the remaining hole inthe rear running board mounting taband two bolts each on the middle andfront running board mounting tabs.
14.Use the hex tool to tighten the bolts.
Note:We recommend that you use a torquewrench to make sure you tighten all thebolts to the required 20 lb.ft (27 Nm)specification.
15.To install the additional runningboard, repeat Steps 1-14 for theopposite side
16.Return the hex tool to the tool pouchand secure it in the vehicle.
REMOVABLE FRONT BUMPER
END CAPS - RAPTOR
REMOVING AND INSTALLING THEFRONT BUMPER END CAPS
WARNING: Do not store thebumper end-caps in the vehicle.Unsecured end-caps could become aprojectile in a sudden stop or crash.
Note:Front bumper end caps are not ratedfor rock crawl use or off-road conditionswhere ground contact is likely to occur. Werecommend removing the end caps beforeuse on roads under these conditions to avoiddamage.
Removing the Front Bumper EndCap
1.Park your vehicle on level ground andmake sure the transmission is in park(P) and the engine is off.
2.Locate the 17 reusable pushpins on thecenter front bumper cover.
3.Use a suitable tool, such as a flat bladescrewdriver in the 0.10 in (2.5 mm)space between the head of the pushpinand the body of the pushpin to pry outthe head away from the body torelease the locking mechanism.
401
2023 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202208, DOMRemovable Vehicle ComponentsE366945

WARNING: It is recommended thatthe wheels of the vehicle be chocked,and that no person should remain in avehicle that is being jacked.
Note:Make sure all passengers are out ofyour vehicle.
Note:Jack at the specified locations toavoid damage to the vehicle.
Note:No maintenance or additionallubrication of your jack is required over theservice life of your vehicle.
1.Park the vehicle on a level, firm surfaceand activate the hazard flashers.
2.Apply the parking brake, and place thetransmission in park (P) for anautomatic transmission or reverse (R)for a manual transmission and turn theengine off.
3.Block the wheel diagonally opposite ofthe flat tire. For example, if the leftfront is flat, block the right rear wheel.
4.Find the jack and tool kit in the reartrunk of the vehicle. Turn the jackretainer counterclockwise to removethe jack and jack extension block.
5.Remove the tool bag.
450
2023 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202208, DOMChanging a Road WheelE166722 E142551 E324358 E343390

What Is Evasive Steering Assist...................290Event Data........................................................24Export Unique Options..............................610Exterior Bulbs................................................367Changing a Rear Lamp Bulb.........................369Exterior Bulb Specification Chart................367Removing a Rear Lamp Assembly..............368Exterior Lamps..............................................105Exterior Lamps On Audible Warning...........107Switching Off Road Driving Lamps On andOff........................................................................107Switching the Daytime Running Lamps Onand Off..............................................................106Switching the Spot Lamps On andOff........................................................................107Using the Front Fog Lamps............................106Using the Turn Signal Lamps.........................105Exterior Lighting Control............................104Exterior Lighting............................................104Autolamps............................................................105Automatic High Beam Control......................108Automatic High Beam Control –Troubleshooting..............................................110Exterior Lamps....................................................105Exterior Zone Lighting.......................................107Headlamps...........................................................104Headlamps – Troubleshooting.....................104Exterior Mirrors...............................................116Exterior Zone Lighting.................................107Exterior Zone Lighting Settings....................108Using the Exterior Zone Lighting...................107What Is Exterior Zone Lighting.......................107
F
Fastening and Unfastening theSeatbelts........................................................62Feature Bar....................................................499Federal Highway AdministrationRegulation...................................................583Fender Anchor Points................................303Fender Anchor Point LoadCapacities.......................................................303Locating the Fender Anchor Points............303Flat TireSee: Changing a Flat Tire - Excluding:Raptor...............................................................449See: Changing a Flat Tire - Raptor..............453
Floor Mats.......................................................327Folding the Exterior Mirrors........................116Ford Assistant...............................................501Ford Assistant – Frequently AskedQuestions.........................................................501Ford Assistant Settings....................................501Using Ford Assistant.........................................501Ford Performance...........................................15Ford Power-UpSee: Software Update Settings.....................517See: Vehicle Software Updates.....................517Ford Protect...................................................526Four-Wheel Drive.........................................195Four-Wheel Drive Modes................................199Four-Wheel Drive –Troubleshooting...........................................200Four-Wheel Drive Indicators...................200Four-Wheel Drive Limitations.................196Four-Wheel Drive Modes..........................199Four-Wheel Drive Auto....................................199Four-Wheel Drive High.....................................199Four-Wheel Drive Low....................................200Two-Wheel Drive High.....................................199Four-Wheel Drive Precautions................195Four-Wheel Drive –Troubleshooting.......................................200Four-Wheel Drive – InformationMessages..........................................................201Four-Wheel Drive – Warning Lamps.........200Front Axle Fluid Capacity andSpecification - Excluding:Raptor..........................................................480Front Axle Fluid Capacity andSpecification - Raptor............................480Front Exterior - 2-Door.................................42Front Exterior - 4-Door, Vehicles With:Hard Top, Excluding: Raptor...................39Front Exterior - 4-Door, Vehicles With:Soft Top..........................................................40Front Exterior - Raptor..................................41Front Parking Aid..........................................241Front Parking Aid Audible Warnings...........242Front Parking Aid Limitations........................242Locating the Front Parking AidSensors.............................................................242What is the Front Parking Aid........................241
621
2023 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202208, DOMIndex