2023 CITROEN DS4 audio

9
It is recommended that the same burning
standard is always used on an individual disc,
with the lowest speed possible (4x maximum)
for the best acoustic quality.
In the particular case of a multi-session CD, the
Joliet standard is recommended.
Use only USB memory sticks formatted to FAT
32 (File Allocation Table).Do not connect a hard disk or USB device
other than audio players to the USB port.Telephone
Pairing a telephone
First-time connection
The services offered depend on the network,
the SIM card and the compatibility of the
Bluetooth telephone used.
Consult your telephone's manual and your
operator to find out which ser vices are
available to you.
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
of the Bluetooth mobile telephone with
the Bluetooth hands-free system of your
audio system must be carried out with the
vehicle stationary and the ignition on.
Visit www.dsautomobiles.co.uk for more
information (compatibility, more help, etc.).
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (refer to the
telephone user guide). Press MENU . Select "
Bluetooth connection " and
confirm.
Select " Search for a device ".
A " Search in progress… " window is displayed.
Select the telephone to be
connected from the list. Only one
telephone can be connected at a
time.
In some cases, the reference number of the
telephone or the Bluetooth address may appear
instead of the name of the telephone. A virtual keypad is displayed on the
screen: enter a code with at least
4
digits and confirm with OK.
A message is displayed on the screen of the
telephone: enter the same code and confirm.
Bluetooth® audio system

10
In case of failure, the number of attempts is not
restricted.
Accept the connection on the telephone.
A message appears in the screen to confirm
successful connection.Pairing can also be initiated from the
telephone by searching for detected
Bluetooth devices.
The directory and the call list can
be accessed after the necessary
synchronisation period (if the telephone is
compatible).
Automatic connection must be configured
in the telephone to allow the connection
each time the vehicle is started.
Managing connections
The telephone connection automatically
includes hands-free operation and audio
streaming.
The ability of the system to connect to just
one profile depends on the telephone. Two
profiles can be connected by default. Press MENU
.
Select " Bluetooth connection " and
confirm.
Select " Connections
management " and confirm. The list
of paired telephones is displayed.
Indicates that a device is
connected.
Indicates connection of the audio
streaming profile.
Indicates the hands-free
telephone profile. Select a telephone and confirm.
Then select and confirm:
-
"
Connect telephone "/
" Disconnect telephone ":
to connect/disconnect the
telephone or the hands-free
connection only.
- "
Connect media player "/
" Disconnect media player ":
to connect/disconnect only
streaming.
- "
Connect telephone +
media player "/ "Disconnect
telephone + media player ":
to connect/disconnect the
telephone (hands-free and
streaming).
- "
Delete connection ": to delete
the pairing.
Bluetooth® audio system

11
To display the "TELEPHONE" menu:
- M ake a long press on SOURCE
or SRC .
-

O
r, press OK to display the
context menu. Select "Call" and
confirm.
-

O
r, press MENU , select
" Telephone " and confirm.
Select "Call" and confirm.
Select " Dial" to enter a number and
confirm.
Select numbers one at a time using
the 7 and 8 buttons and confirm.
Correction allows numbers to be deleted one
at a time. Select OK and confirm to start the
call.
Making a call – Recently
called numbers
To display the " TELEPHONE" menu:
- M ake a long press on SRC/TEL .
-

O
r, press the thumb wheel to
display the contextual menu.
Select "Call" and confirm.
-

O
r, press MENU , select
" Telephone " and confirm.
Select "Call" and confirm.
Select " Calls list " and confirm.
Select the number and confirm to
start the call.
Making a call – Dialling
(Depending on the compatibility of the phone)
The calls list includes calls sent and
received in the vehicle using the
connected telephone.
Making a call – From the
directory of contacts
It is possible to make a call directly from
the telephone; park the vehicle first as a
safety measure. To display the " TELEPHONE" menu:
-

M
ake a long press on SRC/TEL .
-

O
r, press the thumb wheel to
display the contextual menu.
Select "Call" and confirm.
-

O
r, press MENU , select
" Telephone " and confirm.
Select "Call" and confirm.
Select " Directory " and confirm.
Select a contact then confirm.
Bluetooth® audio system

12
Receiving a call
An incoming call is announced by a ring and
a superimposed display in the multifunction
screen."YES " to accept the call is selected
by default.
Press OK to accept the call.
Select " NO" and confirm to reject
the call.
or
Press one of these buttons to accept
the call. A long press on ESC
or on TEL,
SOURCE

or SRC
also rejects an
incoming call.
Managing calls
Home
Work
Mobile
(depending on the information
available in the directory contact
records of the telephone connected).
Select the number and confirm.
During a call, press OK to display
the contextual menu.
Ending a call
In the contextual menu, select
" Hang up " to end the call.
A long press on one of these buttons
also ends the call.
Secret – Mute
(so that the caller cannot hear)
In the contextual menu:
-

s
elect " Micro OFF " to switch off
the microphone.
-

d
eselect " Micro OFF " to switch
the microphone on.
Combined mode
(to leave the vehicle without ending the call)
In the contextual menu:
-

s
elect "Combined mode "
to transfer the call to the
telephone.
-

d
eselect "Combined mode " to
transfer the call to the vehicle.
In some cases, the combined mode must be
activated from the telephone.
If the contact has been cut off, when you
reconnect on returning to the vehicle,
the Bluetooth connection will be restored
automatically (depending on the compatibility of
the telephone).
Bluetooth® audio system

13
Interactive voice response
From the contextual menu, select
"DTMF tones " and confirm to use
the numerical keypad to navigate in
the interactive voice response menu.
Consultation call
From the contextual menu, select
" Switch " and confirm to return to a
call left on hold.
Directory
To access the directory, press and
hold SOURCE or SRC.
or press OK , and
select " Call" and confirm.
Select " Directory " to see the list of
contacts. To modify the contacts saved in the
system, press MENU
then select
" Telephone " and confirm.
Select " Directory management "
and confirm.
Yo u c a n :
- "
Consult an entr y ",
- "
Delete an entry ",
- "
Delete all entries ".
The system accesses the
telephone's contacts directory,
depending on its compatibility, and
while it is connected by Bluetooth.
With certain telephones connected
by Bluetooth you can send a contact
to the directory of the audio system.
Contacts imported in this way are
saved in a permanent directory
visible to all, whatever the telephone
connected.
The menu for the directory is not
accessible if it is empty.
Audio settings
Screen C
Press ¯ to display the audio
settings menu.
The settings available are:
-


Ambience,
-

Bass,
-


Treble,
-


Loudness,
-

D

istribution: Personalised or Driver,
-
L

eft/right balance ,
-
F

ader (front/rear balance),
-
Aut

o. volume Select and confirm " Other
settings… " to display the rest of the
list of settings available.
Bluetooth® audio system

14
The distribution (or spatialisation using the
Arkamys© system), is an audio process
which allows the sound quality to be
improved according to the setting chosen,
corresponding to the position of the
listeners in the vehicle.
The audio Ambience, Treble and
Bass


settings are different and
independent for each sound source.
Onboard audio: Arkamys
© Sound Staging
optimises the distribution of sound in the
passenger compartment.
Frequently asked questions
The following information groups together the
answers to the most frequently asked questions
concerning your audio system.
Bluetooth® audio system

15
QUESTIONRESPONSE SOLUTION
There is a difference in sound
quality between the different
audio sources (radio, CD...). To allow for optimal listening quality, the audio settings
(Volume, Bass, Treble, Ambience, Loudness) can be
tailored to different sound sources, which can generate
audible differences when changing source (radio, CD...). Check that the audio settings (Volume, Bass, Treble,
Ambience, Loudness) are adapted to the sources
listened to. It is advisable to set the AUDIO functions
(Bass, Treble, Front-Rear Fader, Left-Right Balance) to
the middle position, select the musical ambience "None"
and set the loudness correction to the "Active" position
in CD mode or to the "Inactive" position in radio mode.
If the bass and treble settings
are modified, the ambience
selected is cancelled. The selection of an ambience imposes specific bass
and treble settings.
To obtain the desired sound quality, modify the treble
and bass settings or select a pre-defined ambience
setting.
If the ambience setting is
changed, the previous settings
for treble and bass are
cancelled.
If the "Driver"/"All passengers"
distribution is modified, the
balance settings are cancelled. Choosing a distribution setting imposes a specific
balance setting. Modifying one without the other is not
possible. Modify the balance or distribution settings to obtain the
desired sound quality.
When changing the balance
setting, the "Driver"/"All
passengers" distribution is
cancelled.
Bluetooth® audio system

16
The reception quality of the
tuned radio station gradually
deteriorates or the stored
stations are not working (no
sound, 87.5 Mhz is displayed,
e t c .) .The vehicle is too far from the transmitter of the station
or no transmitter is present in the geographical area.
Activate the RDS mode and start a new search for the
station so that the system can check whether a stronger
transmitter is available in the geographic area.
The environment (hills, buildings, tunnels, basement car
parks, etc.) block reception, including in RDS tracking
mode. This phenomenon is normal and does not indicate a
failure of the audio equipment.
The aerial is absent or has been damaged (for example
when going through an automatic car wash or in an
underground car park). Have the aerial checked in the dealer network.
Sound cut-outs of 1 to
2
seconds in radio mode. During this brief sound cut-out, the RDS searches for
another frequency giving better reception of the station. Switch off the RDS function if the phenomenon is too
frequent and always on the same route.
Traffic announcement (TA) is
displayed. I do not receive any
traffic information. The radio station does not broadcast traffic information. Tune to a radio station which broadcasts traffic
information.
The stored stations are not
found (no sound, 87.5 MHz is
displayed...). An incorrect waveband is selected.
Press the BAND button to return to the waveband on
which the stations are stored.
The CD is ejected every time or
is not played. The CD is upside down, cannot be read, does not
contain audio files or contains audio files of a format
that cannot be played by the audio system.
The CD is protected by an anti-pirating system not
recognised by the audio system. -

C
heck that the CD is inserted in the player the right
way up.
-

C
heck the condition of the CD: the CD cannot be
played if it is too badly damaged.
-

C
heck the content in the case of a recorded CD:
consult the advice in the "Audio" section.
-

T
he audio system’s CD player does not read DVDs.
-

B
ecause of low quality, certain burned CDs will not
be read by the audio system.
Bluetooth® audio system