Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/22/22
6 Introduction
1. Air Vents0236.
2. Exterior Lamp Controls 0156.
Turn Signal Lever. See
Turn and Lane-Change
Signals 0160.
IntelliBeam System Button
(If Equipped). See Exterior
Lamp Controls 0156.
3. Instrument Cluster 0127.
Driver Information Center
(DIC) Display. See Driver
Information Center (DIC)
0 144.
4. Windshield Wiper/Washer 0118.
Rear Window Wiper/
Washer 0120.
5. ENGINE START/STOP Button. See Ignition
Positions 0257.
6. Park Assist Button. See Park Assist 0318.
Automatic Parking Assist
(APA) Button. See Park
Assist 0318. 7. Stop/Start Disable Switch.
See Stop/Start System
0259.
8. Light Sensor. See Automatic Headlamp
System 0159.
9. Hazard Warning Flashers 0160.
Lane Keep Assist (LKA)
0 338 (If Equipped).
10. Infotainment Controls. See Overview 0165.
11. Heated and Ventilated Front Seats 054 (If
Equipped).
12. Dual Automatic Climate Control System 0228.
13. MODE Switch. See Driver Mode Control 0278.
Traction Control/
Electronic Stability Control
0 276.
14. Infotainment Controls. See Overview 0165.
15. Shift Lever. See Automatic Transmission 0266. 16. Steering Wheel Controls
0167.
17. Steering Wheel Controls 0167.
Driver Information Center
(DIC) Controls. See Driver
Information Center (DIC)
0 144.
18. Horn 0118.
19. Steering Wheel Adjustment 0117 (Out
of View).
20. Forward Collision Alert (FCA) System 0326 (If
Equipped).
Heated Steering Wheel
0 118 (If Equipped).
21. Cruise Control 0280.
Adaptive Cruise Control
(Advanced) 0283 (If
Equipped).
Phone Button. See
Steering Wheel Controls
0 167.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/22/22
Introduction 7
22. Data Link Connector (DLC)(Out of View). See
Malfunction Indicator
Lamp (Check Engine Light)
0134.
23. Hood Release. See Hood 0365.
24. Head-Up Display (HUD) 0147 (If Equipped).
25. Instrument Panel Illumination Control 0161.
26. Electric Parking Brake 0274.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/23/22
10 Keys, Doors, and Windows
Q:Press to lock all doors and
if equipped, the fuel door. The
turn signal indicators may
flash and/or the horn may
sound on the second press to
indicate locking. To view
available settings for this
feature, touch the Settings
icon on the infotainment home
page. Select “Vehicle”to
display the list of available
options and select “Remote
Lock, Unlock, Start”.
If the driver door is open when
Qis pressed and Open Door
Anti-Lockout is enabled, all
doors will lock and then the driver door will immediately
unlock. To view available
settings for this feature, touch
the Settings icon on the
infotainment home page.
Select
“Vehicle” to display the
list of available options and
select “Power Door Locks”. f
the passenger door is open
when
Qis pressed, all
doors lock.
Pressing
Qmay also arm the
theft-deterrent system. See
Vehicle Alarm System 033.
If equipped with remote
folding mirrors, press and hold
Qfor one second to fold the
mirrors, if enabled. To view
available settings for this
feature, touch the Settings
icon on the infotainment home
page. Select “Vehicle”to
display the list of available
options and select “Comfort
and Convenience”.
K: Press to unlock the driver
door and if equipped, the fuel
door. Press unlock again within five seconds to unlock
all doors. The remote key can
be programmed to unlock all
doors on the first button
press.To view available
settings for this feature, touch
the Settings icon on the
infotainment home page.
Select
“Vehicle” to display the
list of available options and
select “Remote Lock, Unlock,
Start”. The turn signal
indicators may flash to
indicate unlocking.To view
available settings for this
feature, touch the Settings
icon on the infotainment home
page. Select “Vehicle”to
display the list of available
options and select “Remote
Lock, Unlock, Start”. When
remotely unlocking the vehicle
at night, the lights come on
briefly to light your approach
to the vehicle.
Pressing
Kwill disarm the
theft-deterrent system. See
Vehicle Alarm System 033.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/23/22
Keys, Doors, and Windows 11
If equipped with remote
folding mirrors, press and hold
Kfor one second to unfold the
mirrors, if enabled. To view
available settings for this
feature, touch the Settings
icon on the infotainment home
page. Select “Vehicle”to
display the list of available
options and select “Comfort
and Convenience”.
If equipped with remote
windows, press and hold
K
until the windows fully open,
if enabled. To view available
settings for this feature, touch
the Settings icon on the
infotainment home page.
Select “Vehicle” to display the
list of available options and
select “Remote Lock, Unlock,
Start”.
/: Press and releaseQand
then immediately press and
hold
/for at least
four seconds to start the
engine from outside the
vehicle using the remote key.
See Remote Vehicle Start 019.
7:Press and release one time
to initiate vehicle locator. The
exterior lamps flash and the
horn chirps three times. Press
and hold
7for three seconds
to sound the panic alarm. The
horn sounds and the turn
signal lamps flash for
30 seconds, or until
7is
pressed again or the vehicle is
started.
b: Press twice quickly to
open or close the liftgate.
Press once to stop the liftgate
from moving.
Keyless Access Operation
With the Keyless Access
system, you can lock and
unlock the doors and access
the liftgate without removing
the remote key from your
pocket, purse, briefcase, etc.
The remote key should be
within 1 m (3 ft) of the liftgate
or door being opened. Keyless Access can be
programmed to unlock all
doors on the first lock/unlock
press from the driver door.
Keyless unlocking can also be
turned off. To view available
settings for this feature, touch
the Settings icon on the
infotainment home page.
Select
“Vehicle” to display the
list of available options and
select “Remote Lock, Unlock,
Start”.
If equipped with memory
seats, remote keys 1 and 2 are
linked to seating positions of
memory 1 or 2. See Memory
Seats 050.
Keyless Unlocking/Locking
from the Driver Door
When the doors are locked
and the remote key is within
1 m (3 ft) of the driver door
handle, pressing the lock/
unlock button on the driver
door handle will unlock the
driver door. If the lock/unlock
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/23/22
12 Keys, Doors, and Windows
button is pressed again within
five seconds, all passenger
doors will unlock.
Driver Shown, PassengerSimilar
Pressing the lock/unlock
button will cause all doors to
lock if any of the following
occur:
.It has been no more than
five seconds since the first
lock/unlock button press.
.Two lock/unlock button
presses were used to unlock
all doors.
.Any vehicle door has opened
and all doors are now closed.
Keyless Unlocking/Locking
from Passenger Doors
When the doors are locked
and the remote key is within
1 m (3 ft) of the door handle,
pressing the lock/unlock
button on that door handle will
unlock all doors. Pressing the
lock/unlock button will cause
all doors to lock if any of the
following occur:
.The lock/unlock button was
used to unlock all doors.
.Any vehicle door has opened
and all doors are now closed.
Disable/Enable Keyless
Unlocking of Exterior Door
Handles and Liftgate
If equipped, keyless unlocking
of the exterior door handles
and liftgate can be disabled
and enabled. Disabling Keyless Unlocking:
With the vehicle off, press and
hold
QandKon the remote
key at the same time for
approximately three seconds.
The turn signal lamps will flash
four times quickly to indicate
access is disabled. Using any
exterior handle to unlock the
doors or open the liftgate will
cause the turn signal lamps to
flash four times quickly,
indicating access is disabled.
If disabled, disarm the alarm
system before starting the
vehicle.
Disabling Keyless Unlocking
may also be configured under
vehicle settings. To view
available settings for this
feature, touch the Settings
icon on the infotainment home
page. Select “Vehicle”to
display the list of available
options and select “Remote
Lock, Unlock, Start”.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/23/22
Keys, Doors, and Windows 13
Enabling Keyless Unlocking:
With the vehicle off, press and
hold
QandKon the remote
key at the same time for
approximately three seconds.
The turn signal lamps will flash
twice quickly to indicate
access is enabled.
Enabling Keyless Unlocking
may also be configured under
vehicle settings. To view
available settings for this
feature, touch the Settings
icon on the infotainment home
page. Select “Vehicle”to
display the list of available
options and select “Remote
Lock, Unlock, Start”.
Passive Locking
This vehicle will lock several
seconds after all doors are
closed if the vehicle is off and
at least one remote key has
been removed or none remain
in the interior.
If equipped, the fuel door
will lock. If other electronic devices
interfere with the remote key
signal, the vehicle may not
detect the remote key inside
the vehicle. If passive locking is
enabled, the doors may lock
with the remote key inside the
vehicle. Do not leave the
remote key in an unattended
vehicle.
To view available settings for
this feature, touch the
Settings icon on the
infotainment home page.
Select
“Vehicle” to display the
list of available options and
select “Power Door Locks”.
Temporary Disable of
Passive Locking
Temporarily disable passive
locking by pressing and
holding
Kon the interior door
switch with a door open for at
least four seconds, or until
three chimes are heard.
Passive locking will then
remain disabled until
Qon the interior door is pressed,
or until the vehicle is
turned on.
Remote Left in Vehicle Alert
When the vehicle is turned off
and an remote key is left in the
vehicle, the horn will chirp
three times after all doors are
closed. To view available
settings for this feature, touch
the Settings icon on the
infotainment home page.
Select
“Vehicle” to display the
list of available options and
select “Remote Lock, Unlock,
Start”.
Remote No Longer in Vehicle
If the vehicle is on with a door
open, and then all doors are
closed, the vehicle will check
for remote keys inside. If an
remote key is not detected,
the Driver Information Center
(DIC) will display NO REMOTE
DETECTED and the horn will
chirp three times.
This occurs only once each
time the vehicle is driven.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/23/22
14 Keys, Doors, and Windows
To view available settings for
this feature, touch the
Settings icon on the
infotainment home page.
Select“Vehicle” to display the
list of available options and
select “Remote Lock, Unlock,
Start”.
Keyless Liftgate Opening
Press the touch pad on the
liftgate handle to open the
liftgate if the remote key is
within 1 m (3 ft).
Key Access
To access a vehicle with a
weak remote key battery, see
Door Locks 020.
Programming Remote
Keys to the Vehicle
Only remote keys programmed
to the vehicle will work. If a
remote key is lost or stolen, a
replacement can be purchased
and programmed through your
dealer. The vehicle can be
reprogrammed so that lost or
stolen remote keys no longer
work. Each vehicle can have
up to eight remote keys
matched to it.
Programming with
Recognized Remote Keys
A new remote key can be
programmed to the vehicle
when there are two
recognized remote keys.
To program, the vehicle must
be off and all of the remote
keys, both currently
recognized and new, must be
with you.
1. Place the two recognized remote keys in the
cupholder.
2. Remove the key lock cylinder cap on the driver
door handle. See Door
Locks 020. Insert the
vehicle key of the remote
key into the key lock
cylinder on the driver door
and turn the key counterclockwise, to the
unlock position, five times
within 10 seconds.
The DIC displays READY
FOR REMOTE #3, 4,
5, ETC.
3. Place the new remote key
into the remote key
pocket. The remote key
pocket is inside the center
console storage area
between the driver and
front passenger seats. The
storage area will need to
be opened and the storage
tray lifted up to access the
remote key pocket.
Cadillac XT6 Owner Manual (GMNA-Localizing-U.S./Canada-16405819) -
2023 - CRC - 3/23/22
Keys, Doors, and Windows 15
4. Press ENGINE START/STOP. When the remote
key is learned the DIC
display will show that it is
ready to program the next
remote key.
5. Remove the remote key from the remote key
pocket and press the
remote key
KorQbutton.
To program additional
remote keys, repeat
Steps 3–5.
When all additional remote
keys are programmed,
press and hold ENGINE
START/STOP for
12 seconds to exit
programming mode.
6. Return the key back into the remote key.
7. Replace the key lock cylinder cap. See Door
Locks 020. Programming without
Recognized Remote Keys
If two currently recognized
remote keys are not available,
follow this procedure to
program up to eight remote
keys. This feature is not
available in Canada. This
procedure will take
approximately 30 minutes to
complete. The vehicle must be
off and all of the remote keys
you wish to program must be
with you.
1. Remove the key lock cylinder cap on the driver
door handle. See Door
Locks 020. Insert the
vehicle key of the remote
key into the key lock
cylinder on the driver door
handle and turn the key
counterclockwise, to the
unlock position, five times
within 10 seconds.
The DIC displays REMOTE
LEARN PENDING,
PLEASE WAIT. 2. Wait for 10 minutes until
the DIC displays PRESS
ENGINE START BUTTON
TO LEARN and then press
ENGINE START/STOP.
The DIC display will again
show REMOTE LEARN
PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the
third time all previously
known remote keys will no
longer work with the
vehicle. Remaining remote
keys can be relearned
during the next steps.
The DIC display should
now show READY FOR
REMOTE # 1.