2023 BMW X3 setting

Warning function
If you leave the lane If you leave the lane and if a lane boundaryhas been detected, the steering wheel vibratesin accordance with the steering wheel vibrationsetting.
When the turn signal is switched on in the cor

Activating/deactivating the BMW
Drive Recorder
The BMW Drive Recorder must be activated
before the first use of the recording function.1."Apps"2."Drive Recorder"3.Accept Privacy Policy.4."Settings"5."Recording allowed"6.Select the desired setting.
Recording functions
Automatic recording Recordings are saved automatically when thevehicle sensors detect an accident.
Manual recording
Using the button Press and hold this button.
Via iDrive
1."Apps"2."Drive Recorder"3."Start recording"
To stop the recording: "Cancel". Recording can also be started by selecting the
widget on the Control Display.
Recording playback and
administration
Stored video recordings can be played back, exported and deleted.
For your own safety, the video recording is
only displayed on the Control Display up to ap

During the display, various settings can be se

Setting the functionWhen the system is active, press the
button repeatedly until the desired function is selected in the toolbar. The
toolbar for Assisted Driving mode is displayed
at the bottom of the instrument cluster.IconFunctionCruise Control with Distance Control.Depending on the equipment version,
cruise control with distance control
and Steering Assistant.
The selected function is shown in green.
Turning on
With Steering Assistant:
1. Press the button on the steering
wheel.2. If necessary, set the cruise control.
Without Steering Assistant:
Press the button on the steering
wheel.
The indicator lights in the instrument cluster light up and the mark on the speedometer is
set to the current speed.
Cruise control is active. The current speed is
maintained and stored as set speed.
If necessary, the Dynamic Stability Control willbe turned on.
Turning off
To switch off the system while stationary, step on brake pedal at the same time.
Press the button on the steering wheel:
With Steering Assistant.
Without Steering Assistant.
The displays turn off. The stored set speed is deleted.
Interrupting manually When active, press the button on the steering
wheel:
With Steering Assistant.
Without Steering Assistant.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in the
following situations:

distance according to the traffic situation or the
ambient conditions, for instance poor visibility.1."CAR"2."Settings"3."Driver Assistance"4.If necessary, "Driving"5."Speed Limit Assistance"6."Adjust distance acc. to situation"
Continuing cruise control
An interrupted cruise control can be continued by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large be

6."Speed limits"7.Select the desired setting:

Via iDrive1."CAR"2."Settings"3."Driver Assistance"4."Parking and Maneuvering"5."Cross traffic warning"6."Cross traffic warning"
Turning on automaticallyIf the system was activated on the control dis

3."General settings"4."Data privacy"5."Individual selection"
System limits of the sensorsAdditional information: