2023 BMW X2 tow

The list is narrowed down further with each
entry.3. Select the icon.4.Select a town/city from the list.5.If necessary, enter the street.6.Select the street as you would the town/ city.7.If necessary, enter a house number.8. Select the icon.9.Select a house number or range of housenumbers from the list.
Starting destination guidance
"Start guidance"
Destination guidance is started to the town/ city center if no street is entered.
Connecting a mobile phoneAfter the mobile phone is connected once tothe vehicle, the mobile phone can be operated
using iDrive, the steering wheel buttons and spoken instructions.
1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Connect new device"5.Select the functions for which the mobilephone is to be used.
The vehicle

gent Safety systems off prior to tow

Warning
Due to system limits, individual functions can malfunction during tow

Checking and adjusting the tire
inflation pressure
Checking1.Switch off the compressor.2.Read the tire pressure on the tire pressure
display.
To continue the trip, a tire inflation pressure of at least 2 bar must be reached.
Removing and stowing the sealant
bottle
1.Unscrew the filler hose of the sealant bottle
from the tire valve.2.Press the red unlocking device.3.Remove the sealant bottle from the com

Remove cover, arrow 2.3.Loosen both nuts, arrow 1, of the outer tail
light. Use the handle of the screwdriver from the onboard vehicle tool kit to loosen.
Carefully pull out the tail light from the body
toward the front, arrow 2. Ensure that the
wiring is not damaged.4.Detach the connector from the light bracket
and detach the tail light wiring.Replacing the bulbs1.Turn the light bracket counterclockwise and remove.2.Press the faulty bulb gently into the socket,turn counterclockwise and remove.3.Proceed in the reverse order to insert thenew bulb and attach the light bracket.
Installing the tail light
1.Connect the plug and hook the wiring onthe tail light, arrow 1.2.Place the tail light with the lugs, arrows 2,on the attachment points of the body and
push onto both of the threaded bolts.3.Press on the tail lights until flush and
tighten both of the nuts.4.Mount the cover. Make sure that the plastic tabs of the cover are correctly seated in the
corresponding recesses of the body.
Lights in the tailgate
General
Follow the safety information, refer to
page 268.
Seite 270MOBILITYReplacing components270
Online Edition for Part no. 01405A540A1

ing another attempt in order to allow the
discharged battery to recharge.3.Let both engines run for several minutes.4.Disconnect the jumper cables in the reverse order.
Check the battery and recharge, if needed.
Tow

Tow truck
NOTICE
The vehicle can become damaged when lift

Tow fittingGeneral information
The screw