Page 72 of 308
Via iDrive:1."My Vehicle"2."Driver profiles"3.Select driver profile.
The driver profile marked with this icon
can be renamed.
4."Change driver profile name"5.Enter profile name.6. Select the icon.
Resetting a driver profile
The settings of the driver profile currently in
use are reset to their factory settings.
Via iDrive:
1."My Vehicle"2."Driver profiles"3.Select driver profile.
The driver profile marked with this icon
can be reset.
4."Reset driver profile"5."OK"
Exporting driver profiles
Most settings of the active driver profile can be
exported.
Exporting is helpful when storing and retrieving
personal settings, for instance prior to a work
Page 131 of 308
Resetting average values
Press and hold the button on the turn signal
lever.
The average consumption since delivery from the factory cannot be reset.
Engine temperature display Principle
Depending on the vehicle equipment, the cur
Page 132 of 308
Page 146 of 308
3. "Tire Pressure Monitor"4.Start the engine but do not drive off.5.Reset tire pressure: "Perform reset".6.Drive away.
The wheels are displayed in gray and the fol
Page 147 of 308
Measure1.Reduce your speed and drive moderately.
Do not exceed a speed of
80 mph/130 km/h.2.At the next opportunity, for instance filling station, check and correct the tire inflation
pressure in all four tires, if necessary.3.Reset the system.
If there is a significant tire pressure
loss
Message A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with the affected tire ap
Page 148 of 308
If the tire pressure in all four tires is correct,
the Tire Pressure Monitor may not have been reset. In this case, perform the reset.
Possible distance travelled with a
depressurized tire
The distance travelled for which it may be pos
Page 229 of 308
Activating/deactivating coasting via
shift paddles1.Shift to the highest gear by pulling the right
shift paddle.2.To activate Coasting mode, actuate the right shift paddle again.
To deactivate, actuate the left shift paddle.
Display
Display in the instrument cluster
The tachometer shows the idle speed. The mark in the efficiency display is backlit inblue and is located at the zero point. The
coasting point indicator is illuminated at the zero point during coasting.
Indications on the Control Display The Coasting mode is displayed in
EfficientDynamics while driving.
The distance traveled in Coasting mode is shown in the consumption history. The meterreading is reset prior to every departure.
Displaying EfficientDynamics
information
Via iDrive:
1."My Vehicle"2."Technology in action"3."EfficientDynamics"4. Select the icon.
System limits
The function is not available if one of the fol
