Page 121 of 308
Check Control
PrincipleThe Check Control system monitors functionsin the vehicle and notifies you of faults in the
monitored systems.
General information
A Check Control message is displayed as a combination of indicator or warning lights and
text messages in the instrument cluster and in
the Head
Page 126 of 308
Current consumption
Instrument clusterDisplays the current fuel con
Page 130 of 308
Calling up information on the Info
Display
Press the button on the turn signal lever.
Information is displayed in the Info Display of
the instrument cluster. Pressing the button re
Page 138 of 308
The indicator light in the instrument cluster isilluminated when the low beams are switched
on.
System limits The automatic headlight control cannot re
Page 139 of 308
The high beams can be switched on and offmanually at any time.
Activate/deactivate
Switch position, depending on the vehicle
equipment:
,
Press the button on the turn signal lever.
The indicator light in the instrumentcluster is illuminated when the low
beams are switched on.
The headlights are automatically changed be
Page 147 of 308
Measure1.Reduce your speed and drive moderately.
Do not exceed a speed of
80 mph/130 km/h.2.At the next opportunity, for instance filling station, check and correct the tire inflation
pressure in all four tires, if necessary.3.Reset the system.
If there is a significant tire pressure
loss
Message A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with the affected tire ap
Page 166 of 308
tem reduces the speed to the set value, within
the physical limits.
Only use Hill Descent Control in low gears or in selector lever position D or R.
Overview Button in the vehicle
Hill Descent Control
Activate Hill Descent Control Press the button. The LED above the
button lights up.
Speeds between approx. 2 mph/3 km/h and approx. 20 mph/30 km/h are adopted as theset speed.
Display in the instrument cluster An icon and the selected desired
speed are displayed.
Page 172 of 308
The indicator lights in the instrument clusterlight up and the mark in the speedometer is set
to the current speed.
Cruise control is active and maintains the set
speed.
If necessary, the Dynamic Stability Control will be turned on.
Turning off
To switch off the system while standing, step on brake pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in thefollowing situations:
