Maintenance
67
*1: Whichever comes first.
*2: Check every 200 hours.
Perform the pre-operation checks and post-operation checks before performing periodic
maintenance.
Jet pump bearingsCheck bearings and
grease condition
√
—
Jet thrust nozzle Check movement, and lu-
bricate
√
—
Handlebar pivot
shaft Check and adjust
√√ —
Steering friction Check and adjust √√ —
Throttle cable Check and adjust √√ —
Jet vacuum bilge Check hoses for clogs
and damage, check
clamps, and clean bilge
strainer
√
—
Stern drain plugs Check O-rings √—
Anode Check for corrosion, and
clean
√
*2 —
Valve clearance Check and adjust √ *2 —
Rubber coupling Check for cracks, inden-
tations, looseness, and
noise √
—
Engine mount Check for damage and
peeling
√
—
Nuts and bolts Check √√ —
Item
OperationInitial Thereafter every
Page
10 hours 50 hours
or 12
months *1 100
hours or 12
months *1 200
hours or 24
months *1
UF4R71E0.book Page 67 Monday, May 10, 2021 1:14 PM
