2022 YAMAHA GP1800R SVHO load capacity

Equipment operation
51
EJU31685Storage compartments
This watercraft is equipped with the following
storage compartments.
The storage compartments are not designed
to be waterproof. If you carry objects that
must be kept dry, put them in a waterproof
bag.
Make sure that the storage compartments
are closed securely before operating the wa-
tercraft.
EJU45250Bow storage compartment
The bow storage compartment is located un-
der the hood.
To open the bow storage compartment:
Pull the hood latch rearward, and then lift up
the rear of the hood.
To close the bow storage compartment:
Push the rear of the hood down to securely
lock it in place.
EJU46000Glove compartment
The glove compartment is located in front of
the seat.
To open the glove compartment:
Push the glove compartment latch forward,
and then lift up the lid.
1Cleat
1 Hood latch
1
1
1Bow storage compartment
Bow storage compartment:
Capacity: 92.0 L (24.3 US gal, 20.2 Imp.gal)
Load limit:
5.0 kg (11 lb)
1
UF4P72E0.book Page 51 Tuesday, August 24, 2021 3:18 PM

Equipment operation
52
To close the glove compartment:
Push the lid down to securely lock it in place.
To drain water from the glove compart-
ment:
(1) Remove the drain plug on the bottom ofthe glove compartment to drain the wa-
ter.
(2) Securely install the drain plug in it original position.
EJU46011Seat storage compartment
The seat storage compartment is located un-
der the rear seat.
The storage compartment is removable.
To open the seat storage compartment:
(1) Remove the rear seat. (See page 48 forseat removal and installation proce-
dures.)
(2) Push the latch forward, and then lift up the lid and remove it.
1Glove compartment latch
1 Glove compartment
Glove compartment:
Capacity:10.2 L (2.7 US gal, 2.2 Imp.gal)
Load limit: 1.5 kg (3 lb)
1
1
1Drain plug
1 Lid
2 Latch
1
2
1
UF4P72E0.book Page 52 Tuesday, August 24, 2021 3:18 PM

Equipment operation
53
To close the seat storage compartment:
(1) Insert the projections on the lid into theslots on the seat storage compartment.
(2) Push the rear of the lid down. (3) Securely install the rear seat in its original
position.
EJU46030Fire extinguisher holder and cover
The fire extinguisher holder and cover are lo-
cated in the bow storage compartment.
To use the fire extinguisher holder and
cover:
(1) Pull the hood latch rearward, and then liftup the rear of the hood.
(2) Unhook the band and remove the fire ex- tinguisher from the fire extinguisher cov-
er.
(3) Place the fire extinguisher in the fire ex- tinguisher cover, and then securely fas-
ten the fire extinguisher with the band.
(4) Push the rear of the hood down to se- curely lock it in place. Make sure that the
1Seat storage compartment
Seat storage compartment:
Capacity:5.4 L (1.4 US gal, 1.2 Imp.gal)
Load limit:
3.0 kg (7 lb)
1
1Hood latch
1 Fire extinguisher holder and cover
2 Band
1
2
1
UF4P72E0.book Page 53 Tuesday, August 24, 2021 3:18 PM

Specifications
93
EJU46451
Specifications
Watercraft capaci-
ty:Maximum people on board: 3 person
Maximum load capacity: 240 kg (530 lb)
Dimensions and
weight: Length: 3.35 m (131.9 in)
Width: 1.24 m (48.8 in)
Height: 1.20 m (47.2 in)
Dry weight: 332 kg (732 lb) (GP1800R SVHO)
340 kg (750 lb) (GP1800R SVHO with
audio)
Performance: Maximum output (according to ISO
8665/SAE J1228): 183.9 kW at 7500 r/min
Maximum fuel consumption: 80.7 L/h (21.3 US gal/h,
17.8 Imp.gal/h)
Cruising range at full throttle: 0.87 hour
Trolling speed: 1250 ±100 r/min
Engine: Engine type: Liquid cooled 4-stroke, DOHC
Number of cylinders: 4
Engine displacement: 1812 cm³
Bore × stroke: 86.0 × 78.0 mm (3.39 × 3.07 in)
Compression ratio: 8.5 : 1
Valve clearance-intake (cold): 0.14–0.23 mm (0.0055–0.0091 in)
Valve clearance-exhaust (cold): 0.36–0.45 mm (0.0142–0.0177 in)
Lubrication system: Wet sump
Cooling system: Water
Starting system: Electric
Ignition system: T.C.I.
Spark plug (NGK): LFR7A
Spark plug gap: 0.8–0.9 mm (0.031–0.035 in)
Battery capacity: 12 V, 18 Ah
Battery type: YTX20L-BS
Charging system: Flywheel magneto
Drive unit: Propulsion system: Jet pump
Jet pump type: Axial flow, single stage
Impeller rotation: Counterclockwise
Jet thrust nozzle angle: 24+24 °
Jet thrust nozzle trim angle: -5, -3, 0, 3, 6 °
UF4P72E0.book Page 93 Tuesday, August 24, 2021 3:18 PM