Instrument operation
62
and the track is not displayed on the map
when set to “Hidden”.
EJU46870Satellite status confirmation (“Satellite
Status”)
You can check information related to satel-
lites that can be detected in the area.
EJU46880Depth contour and safety contour settings
(“Depth/Position”)
Set the “DEPTH CONTOUR” and “SAFETY
CONTOUR” to change the depth contour
and safety contour displayed on the map.
Change the “DEPTH CONTOUR” value to
change the display of the depth contour dis-
played on the map.
The color of the water area displayed on the
map screen changes according to the value
set in “SAFETY CONTOUR”.
TIP
The deeper the depth, the lighter the color
of the water area. The shallower the depth,
the darker the color of the water area.
When “SAFETY CONTOUR” is set to
“OFF”, the color of the water area is dis-
played in white.
EJU46890Map display settings (“Chart Setup”)
You can switch between showing and hiding
information displayed on the map screen. Se-
lect an item to switch between showing and
hiding the item. The following display infor-
mation can be switched.
“GRIDS”
“TRACKS”
“WAYPOINTS”
“WAYPOINT NAMES”
“NAV AIDS”
TIP
If “TRACKS” is set to hide in the map display
settings, the track will not be displayed on the
map screen even if the track is set to
“Shown”.
EJU46901Return to factory settings (“Factory
Reset”)
The settings can be reset to their factory de-
fault settings. The items that are reset and the
default settings are as follows.
PIN code
Last maintenance time
GeoFence information
Waypoint information
Drive control mode information
Auto trim information
To reset the settings:
(1) Select “RESET”.
1“DEPTH CONTOUR”
2 “SAFETY CONTOUR”
Satellite
Satellites:
Time (GMT):
Latitude:
3
6:22 AM
34.69164
Depth / Position
DEPTH CONTOURALL20m10m5m2mOFF
SAFETY CONTOUR20m10m5m2mOFF
1
2
UF3V73E0.book Page 62 Friday, October 8, 2021 1:30 PM
