2022 YAMAHA FX HO lock

Instrument operation
45
Additional information
Information such as the time or information
from a connected device is displayed in addi-
tional information. Select additional informa-
tion to switch the displayed information.
Information that can be displayed in addition-
al information is as follows.
Clock
Drive control mode setting information
Status of connected devices
Information for currently playing music
(equipped models)
TIP
If none of these functions are turned on, ad-
ditional information is not displayed.
EJU47021
Map screen “ ”
Select “ ” on the screen tab bar to display
the map screen.
TIP
If a map card is not loaded, the map func-
tions will be limited. To load a map card,
read the QR code displayed on the map
screen.
If a GPS signal cannot be acquired, none of
the map functions will be available.
1 Additional information
16
KM/H
FAST
ACCEL
1
MPHKM/H12.7Vx1000 RPMPM
200 m
UF3V73E0.book Page 45 Friday, October 8, 2021 1:30 PM

Instrument operation
51
(6) Enter the track name, and select “Save”.
TIP
The “Record” function can also be activated
from the track manager on the settings
screen.
EJU46702GeoFence
The “GeoFence” function sets an area on the
map and displays a message if the watercraft
goes beyond the set area.
To activate the “GeoFence” function:
(1) Select “ ” on the “overflow menu” todisplay the detailed information for Geo-
Fence.
(2) Select “OFF”.
TIP
If the “GeoFence” function is activated, “ ”
is displayed in the center position of the Geo-
Fence on the map.
To stop the “GeoFence” function:
(1) Select “ ” on the “overflow menu” to display the detailed information for Geo-
Fence.
(2) Select “ON”.
To edit the radius of the “GeoFence”
function:
(1) Select “ ” on the “overflow menu” to display the detailed information for Geo-
Fence.
(2) Select “ ”.
(3) Operate the radius adjustment slider to set the radius of the GeoFence.
(4) Select “Save”.
1 “Save”
1 Message
SaveAdd Track
ABC
1
Dismiss
RETURN TO DOCK
You traveled too far. Please head back to the dock.
The owner will be notified.
1
1“OFF”
1 Radius adjustment slider
GeoFence
3.217kmmFence Distance To Center
OFF
Lock
1
W
GeoFenceCancelSave
W3.2kmFence
1
UF3V73E0.book Page 51 Friday, October 8, 2021 1:30 PM

Instrument operation
52
To lock or unlock the GeoFence, select
“Lock” or “Unlock” and enter the PIN code.
TIP
If the GeoFence is locked, you cannot acti-
vate or stop the operation of the “GeoFence”
function or edit the GeoFence radius.
EJU46711Map settings “ ”
Map settings can be displayed on the setting
menu screen by selecting “ ” from the
“overflow menu” on the map screen. See
page 59 for detailed information on map set-
tings.
EJU46721
Information screen “ ”
The information screens show the trip infor-
mation and fuel information in the center dis-
play. Displayed items are as follows.
“Trip Time”
“Trip Distance”
“Fuel Average”
“Fuel Used”
“Fuel Rate”
“Engine Hours”
TIP
The display units for the distances and fuel
amounts are selected according to the dis-
play units of the multifunction information
center. (See page 55 for information on
switching the display units.)
1“Save”
W
GeoFenceCancelSave
W3.2 kmFence
1
Trip Information
Trip Time:Hrs0.0
Trip Distance:km1.1
Fuel Average:km/L0.0
Fuel Used00
UF3V73E0.book Page 52 Friday, October 8, 2021 1:30 PM

Instrument operation
54
EJU46730
Media screen “ ” (equipped models)
Select “ ” on the screen tab bar to display
the media screen.
The media screen displays track information
for the track currently being played with a de-
vice connected via Bluetooth in the center
display.
TIP
Selecting the play/pause button switches the
displayed button. To connect the watercraft
with a device via Bluetooth, see page 57.
EJU46740
Setting menu screen “ ”
The following settings can be checked and
changed on the setting menu screen.
“PIN Setting”
“Display”
“Units”
“Language”
“Clock”
“Wellness”
“Notifications”
“Phone Manager”
“Map Settings”
“Factory Reset”
“Regulatory Info”
EJU46751Changing the PIN (“PIN Settings”)
The PIN can be changed to any 4-digit num-
ber.
To change the PIN:
(1) Enter the current PIN code, and
select “ ”.
1Rewind/previous track button
2 Play/Pause button
3 Fast forward/track skip button
4 Volume adjustment slider
Bluetooth
TitleArtist
123
4
Settings
Pin Setting
Display
Units
Language
123
456
789
Cancel0
Enter Current PIN
UF3V73E0.book Page 54 Friday, October 8, 2021 1:30 PM

Instrument operation
55
(2) Enter the new PIN code to be set, andselect “ ”.
(3) Enter the new PIN code again, and select “ ”.
EJU46761Display settings (“Display”)
Change the theme color and brightness of
the display.
To change the theme color of the dis-
play:
Select the theme color from blue, green, red,
and orange.
To change the brightness of the display:
Operate the brightness adjustment slider to
adjust the brightness.
EJU46771Selecting the display units (“Unit”)
The following display units can be selected
for the display units of the multifunction infor-
mation center.
“U.S. Unit”: Distances are shown in miles,
speeds are shown in MPH, and fuel
amounts are shown in gallons.
“Metric”: Distances are shown in kilome-
ters, speeds are shown in km/h, and fuel
amounts are shown in liters.
To select the display units:
Select “U.S. Unit” or “Metric”.EJU46781Selecting the display language
(“Language”)
The display language for the multifunction in-
formation center can be selected from the
following languages.
English
Spanish
French
To select the display language:
Choose the desired language.EJU46791Display clock change (“Clock”)
The display clock settings can be changed.
1Theme color
1 Brightness adjustment slider
COLOR :
BRIGHTNESS :
Display Settings
1
COLOR :
BRIGHTNESS :
Display Settings
1
Unit Selection
U.S. UnitMetric
Language Selection
English
Español
Français
UF3V73E0.book Page 55 Friday, October 8, 2021 1:30 PM

Instrument operation
56
Time Zone
Clock display type
Daylight Saving Time
To switch the time zone:
(1) Select the currently set time zone value.
(2) Select the desired time zone.
To switch the clock display type:
Select between “12-Hr” and “24-Hr” to
switch the clock display type value.
To switch to daylight saving time:
Select between “Enabled” and “Disabled” to
switch the daylight saving time value.
EJU46801Displaying the time since the last
maintenance (“Wellness”)
The total number of hours that the engine has
been running since the last watercraft main-
tenance can be displayed.
To reset the number of hours of opera-
tion:
(1) Select “Reset”.
1Time zone value
1 Clock display type value
Clock
ESTTime Zone:
12-HrClock Type:
DisabledDaylight Saving Time:
1
Clock
ESTTime Zone:
12-HrClock Type:
DisabledDaylight Saving Time:
1
1Daylight saving time value
1 “Reset”
Clock
ESTTime Zone:
12-HrClock Type:
DisabledDaylight Saving Time:
1
Wellness
TIME SINCE LAST MAINTENANCE :
Reset
Hrs0.0
Wellness
TIME SINCE LAST MAINTENANCE :
Reset
Hrs0.0
1
UF3V73E0.book Page 56 Friday, October 8, 2021 1:30 PM

Instrument operation
60
EJU46840GeoFence settings (“GeoFence”)
Make various settings for the “GeoFence”
function.
Operate the “ON” and “OFF” button to start
and stop the “GeoFence” function.
Set “Fence” to change the radius of the Geo-
Fence.
“Distance To Center” indicates the distance
from the watercraft to the center of the Geo-
Fence.
Operate “Lock” and “Unlock” to lock and un-
lock the GeoFence.
TIP
GeoFence settings and operations can also
be performed from the map screen. For de-
tailed information on the GeoFence, see page
51.
EJU46850Waypoint manager (“Waypoints”)
Waypoint manager manages registered way-
points.
The following settings can be confirmed in
the waypoint manager.
Display a list of registered waypoints
Display detailed information for registered
waypoints
Add or delete a waypoint
Edit waypoint information
Start or stop the “Go-To” function
TIP
See page 46 for how to add or delete way-
points, edit waypoint information, and start
and stop the “Go-To” function.
Display the waypoint manager to display a list
of registered waypoints.
Select a registered waypoint to display the
detailed information for that waypoint. Select
“View” from the detailed information to dis-
play the map screen, and the position of that
waypoint appears.
1“ON” / “OFF”
2 “Fence”
3 “Lock” / “Unlock”
4 “Distance To Center”
Map Settings
Geofence
Waypoints
Tracks
Satellite Status
GeoFenceON
Lock
3.220kmmFence Distance To Center
1
324
1“View”
Waypoint ManagerGo-To
AKA
DeleteView
Distance:m497.41
Lat:34.69164
Lon:137.58110
1
UF3V73E0.book Page 60 Friday, October 8, 2021 1:30 PM

Instrument operation
63
(2) After accepting the final confirmationmessage, select “Reset”.
EJU46910Regulatory information confirmation
(“Regulatory Info”)
Displays the regulatory information for which
the watercraft is authorized.
EJU46920
Engine lock screen “ ”
You can lock or unlock the engine by entering
the PIN code on the engine lock screen. (See
page 24 for how to unlock the screen.)
TIP
If the watercraft is in accessory mode, the en-
gine cannot be locked or unlocked.
1“RESET”
1 “Reset”
Factory Reset
RESET USER SETTINGS
RESET
1
CancelReset
Reset To Factory Settings?
Resetting to Factory Settings cannot be undone.
1
Regulatory Information
Argentina:RAMATEL
X-00000
Australia-NZ:
R
123
456
789
Cancel0
Enter PIN Code
UF3V73E0.book Page 63 Friday, October 8, 2021 1:30 PM