2022 TOYOTA RAV4 PLUG-IN HYBRID oil

4386-4. Using the other interior features
WARNING
ODo not charge devices if the charge area is covered in dust
ODo not cover with a cloth or similar material
NOTICE
QSituations in which the function may not operate normally
Devices may not be charged normally
in the following situations.
OThe portable device is fully charged
OThe portable device is being charged with a cable connected
OThere is foreign matter between the charge area and portable device
OCharging has caused the portable device to heat up
OThe temperature around the charging tray is 35°C (95°F) or
higher, such as in extreme heat
OThe portable device is placed with its charging side facing up
OThe portable device is placed in an area misaligned from the charge area
OThe portable device is larger than the charging tray
OA foldable and portable device is placed outside the charge area
OThe vehicle is in an area where strong electrical waves or noise are
emitted, such as near a television tower, power plant, gasoline sta-tion, broadcasting station, large dis-
play, airport, etc.
OAny of the following objects that is
2mm (0.08 in) or thicker is between the charging side of the portable device and the charge area
• A card that has metal on it, such as aluminum foil, etc.
• A pack of cigarettes that includes aluminum foil
• A wallet or bag that is made of metal
•Coins
• A heating pad
• CDs, DVDs or other media
• A metal accessory
• A case or cover made of metal
OElectric wave type wireless remote controls are being used nearby
O2 or more portable devices are placed on the charging tray at the
same time
If charging is abnormal or the opera- tion indicator light continues to flash
for any other reason, the wireless charger may be malfunctioning. Con-tact any authorized Toyota retailer or
Toyota authorized repairer, or any reliable repairer as soon as possible.
QTo prevent malfunctions and data corruptions
OWhen charging, bringing a credit, or
other magnetic card, or magnetic storage media close to the charge area may clear any stored data due
to magnetic influence. Also, do not bring a wristwatch or other preci-sion instrument close to the charge
area since doing so may cause it to malfunction.

4427-1. Maintenance and care
7-1.Mainte nance a nd care
Working from top to bottom, lib-
erally apply water to the vehicle
body, wheel wells and underside
of the vehicle to remove any dirt
and dust.
Wash the vehicle body using a
sponge or soft cloth, such as a
chamois.
For hard-to-remove marks, use
car wash soap and rinse thor-
oughly with water.
Wipe away any water.
Wax the vehicle when the water-
proof coating deteriorates.
If water does not bead on a clean sur-
face, apply wax when the vehicle body
is cool.
QBefore car washes
Check that the fuel filler door and
charging port lid on your vehicle are
closed properly.
QAutomatic car washes
OBefore washing the vehicle:
• Fold the mirrors
• Turn off the power back door (if
equipped)
Start washing from the front of the vehi-
cle. Make sure to extend the mirrors
before driving.
OBrushes used in automatic car
washes may scratch the vehicle sur-
face, parts (wheel, etc.) and harm
your vehicle’s paint.
ORear spoiler may not be washable in
some automatic car washes. There
may also be an increased risk of dam-
age to vehicle.
QHigh pressure car washes
As water may enter the cabin, do not
bring the nozzle tip near the gaps
around the doors or perimeter of the
windows, or spray these areas continu-
ously.
QNote for a smart entry & start sys-
tem
If the door handle becomes wet while
the electronic key is within the effective
range, the door may lock and unlock
repeatedly. In that case, follow the fol-
lowing correction procedures to wash
the vehicle:
OPlace the key in a position 2 m (6 ft.)
or more separate from the vehicle
while the vehicle is being washed.
(Take care to ensure that the key is
not stolen.)
OSet the electronic key to battery-sav-
ing mode to disable the smart entry &
start system. (P.222)
QWheels and wheel ornaments
ORemove any dirt immediately by using
a neutral detergent.
OWash detergent off with water imme-
diately after use.
OTo protect the paint from damage,
make sure to observe the following
precautions.
• Do not use acidic, alkaline or abrasive
detergent.
• Do not use hard brushes.
• Do not use detergent on the wheels
when they are hot, such as after driv-
ing or parking in hot weather.
Cleaning and protecting
the vehicle exterior
Perform the following to pro-
tect the vehicle and maintain it
in prime condition:
Cleaning instructions

443
7
7-1. Maintenance and care
Maintenance and care
QFront side windows water-repel-
lent coating (except quarter win- dow)
OThe following precautions can extend the effectiveness of the water-repel-lent coating.
• Remove any dirt, etc., from the front side windows regularly.• Do not allow dirt and dust to accumu-
late on the windows for a long period. Clean the windows with a soft, damp cloth as soon as possible.
• Do not use wax or glass cleaners that contain abrasives when cleaning the windows.
• Do not use any metallic objects to remove condensation build up.
QBrake pads and calipers
Rust may form if the vehicle is parked
with wet brake pads or disc rotors, caus- ing them to stick. Before parking the vehicle after it is washed, drive slowly
and apply the brakes several times to dry the parts.
QBumpers
Do not scrub with abrasive cleaners.
QPlated portions
If dirt cannot be removed, clean the parts as follows:
OUse a soft cloth dampened with an approximately 5% solution of neutral detergent and water to clean the dirt
off.
OWipe the surface with a dry, soft cloth
to remove any remaining moisture.
OTo remove oily deposits, use alcohol
wet wipes or a similar product.
WARNING
QWhen washing the vehicle
Do not apply water to the inside of the
engine compartment. Doing so may cause the electrical components, etc. to catch fire.
QWhen cleaning the windshield
Set the wiper switch to off. If the wiper switch is in “AUTO”, the
wipers may operate unexpectedly in the following situations, and may result in hands being caught or other
serious injuries and cause damage to the wiper blades.
Off
“AUTO”
OWhen the upper part of the wind-
shield where the raindrop sensor is located is touched by hand
OWhen a wet rag or similar is held close to the raindrop sensor
OIf something bumps against the windshield
OIf you directly touch the raindrop sensor body or if something bumps
into the raindrop sensor
QPrecautions regarding the
exhaust pipes
Exhaust gasses cause the exhaust pipes to become quite hot.
When washing the vehicle, be careful not to touch the pipes until they have cooled sufficiently, as touching hot
exhaust pipes can cause burns.
A
B

4447-1. Maintenance and care
WARNING
QPrecaution regarding the rear bumper with Blind Spot Monitor
(if equipped)
If the paint of the rear bumper is chipped or scratched, the system may
malfunction. If this occurs, consult any authorized Toyota retailer or Toyota authorized repairer, or any
reliable repairer.
NOTICE
QTo prevent paint deterioration and corrosion on the body and
components (aluminum wheels, etc.)
OWash the vehicle immediately in
the following cases:
• After driving near the sea coast
• After driving on salted roads
• If coal tar or tree sap is present on the paint surface
• If dead insects, insect droppings or
bird droppings are present on the paint surface
• After driving in an area contami- nated with soot, oily smoke, mine dust, iron powder or chemical sub-
stances
• If the vehicle becomes heavily soiled with dust or mud
• If liquids such as benzene and gas- oline are spilled on the paint sur-face
OIf the paint is chipped or scratched, have it repaired immediately.
OTo prevent the wheels from corrod-ing, remove any dirt and store in a
place with low humidity when stor- ing the wheels.
QCleaning the exterior lights
OWash carefully. Do not use organic substances or scrub with a hard
brush. This may damage the surfaces of the lights.
ODo not apply wax to the surfaces of the lights.
Wax may cause damage to the lenses.
QWhen using an automatic car wash
Set the wiper switch to off position.
If the wiper switch is in “AUTO”, the wipers may operate and the wiper blades may be damaged.
QWhen using a high pressure car wash
OWhen washing the vehicle, do not let water from the high-pressure washer directly hit the camera (if
equipped) or the area around the camera. Due to the shock from the high pressure water, it is possible
that the device may not operate normally.
ODo not bring the nozzle tip close to boots (rubber or resin manufac-tured cover), or connectors or the
following parts. The parts may be damaged if they come into contact with high-pres-
sure water.
• Traction related parts
• Steering parts
• Suspension parts
• Brake parts
OKeep the cleaning nozzle at least 30 cm (11.9 in.) away from the vehi-cle body. Otherwise resin section,
such as moldings and bumpers, may be deformed and damaged. Also, do not continuously hold the
nozzle in the same place.

4507-3. Do-it-yourself maintenance
7-3.Do-it-y ours elf main ten ance
Do-it-yourself service
precautions
If you perform maintenance by
yourself, be sure to follow the
correct procedure as given in
these sections.
Maintenance
ItemsParts and tools
12-volt battery
condition
( P.460)
•Grease
• Conventional
wrench (for terminal
clamp bolts)
Engine/power
control unit
coolant level
( P.457)
• “Toyota Super Long
Life Coolant” or a
similar high quality
ethylene glycol-
based non-silicate,
non-amine, non-
nitrite and non-
borate coolant with
long-life hybrid
organic acid technol-
ogy
“Toyota Super Long
Life Coolant” is pre-
mixed with 50%
coolant and 50%
deionized water.
• Funnel (used only
for adding coolant)
Engine oil level
( P.455)
• “Toyota Genuine
Motor Oil” or equiva-
lent
• Rag or paper towel
• Funnel (used only
for adding engine
oil)
Fuses
( P.488)
• Fuse with same
amperage rating as
original
DC/DC Con-
verter air
intake vent
( P.479)
• Vacuum cleaner,
etc,
• Phillips screwdriver
Light bulbs
( P.491)
• Bulb with same
number and watt-
age rating as origi-
nal
• Phillips-head screw-
driver
• Flathead screw-
driver
•Wrench
Radiator and
condenser
( P.458)

Tire inflation
pressure
( P.472)
• Tire pressure gauge
• Compressed air
source
Washer fluid
( P.459)
• Water or washer
fluid containing anti-
freeze (for winter
use)
• Funnel (used only
for adding water or
washer fluid)
WARNING
The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or
become electrically energized. To avoid death or serious injury, observe the following precautions.
ItemsParts and tools

451
7
7-3. Do-it-yourself maintenance
Maintenance and care
WARNING
QWhen working on the engine compartment
OMake sure that “IGNITION ON” on the multi-information display and the “READY” indicator are both off.
OKeep hands, clothing and tools away from the moving fan.
OBe careful not to touch the engine, power control unit, radiator, exhaust
manifold, etc. right after driving as they may be hot. Oil and other flu-ids may also be hot.
ODo not leave anything that may burn easily, such as paper and
rags, in the engine compartment.
ODo not smoke, cause sparks or
expose an open flame to fuel. Fuel fumes are flammable.
OTake care because brake fluid can harm your hands or eyes and dam-age painted surfaces. If fluid gets
on your hands or in your eyes, flush the affected area with clean water immediately. If you still experience
discomfort, consult a doctor.
QWhen working near the electric
cooling fan or radiator grille
Be sure the power switch is off. With the power switch in ON, the
electric cooling fan may automatically start to run if the air conditioning is on and/or the coolant temperature is
high. ( P.458)
QSafety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc., from getting in your eyes.
NOTICE
QIf you remove the air cleaner fil-ter
Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air.
QIf the fluid level is low or high
It is normal for the brake fluid level to
go down slightly as the brake pads wear or when the fluid level in the accumulator is high.
If the reservoir needs frequent refill- ing, it may indicate a serious problem.

455
7 7-3. Do-it-yourself maintenance
Maintenance and care
Fuse boxes (P.488)
Engine oil filler cap (P.456)
Engine oil level dipstick (P.455)
Radiator (P.458)
Electric cooling fan
Condenser (P.458)
Power control unit coolant reservoir (P.458)
Washer fluid tank (P.459)
Engine coolant reservoir (P.457)
Q12-volt battery
P.460
With the engine at operating tem-
perature and turned off, check the
Engine compartment
Components
A
B
C
D
E
F
G
H
I
Checking and adding the
engine oil

4567-3. Do-it-yourself maintenance
oil level on the dipstick.
QChecking the engine oil
1Park the vehicle on level
ground. After warming up the
engine and turning off the hybrid
system, wait more than 5 min-
utes for the oil to drain back into
the bottom of the engine.
2Holding a rag under the end,
pull the dipstick out.
3Wipe the dipstick clean.
4Reinsert the dipstick fully.
5Holding a rag under the end,
pull the dipstick out and check
the oil level.
Low
Normal
Excessive
The shape of the dipstick may differ depending on the type of vehicle or
engine.
6Wipe the dipstick and reinsert it
fully.
QChecking the oil type and pre-
paring the items needed
Make sure to check the oil type and
prepare the items needed before
adding oil.
Engine oil selection
P.561
Oil quantity (Low  Full)
1.5 L (1.6 qt., 1.3 Imp. qt.)
Item
Clean funnel
QAdding engine oil
If the oil level is below or near the
low level mark, add engine oil of the
same type as that already in the
engine.
1Remove the oil filler cap by turn-
ing it counterclockwise.
2Add engine oil slowly, checking
the dipstick.
3Install the oil filler cap by turning
it clockwise.
A
B
C