2022 TOYOTA PRIUS PLUG-IN HYBRID ECU

811-3. Theft deterrent system
1
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
For safety and security
OThe vehicle is inside an automatic or high-pressure car wash.
O The vehicle experiences impacts, such as hail, lightning strikes, and other
kinds of repeated impacts or vibrations.
O The vehicle is parked in a place where
extreme vibrations or noises occur, such
as in a parking garage.
O Ice or snow is removed from the vehicle,
causing the vehicle to receive repeated
impacts or vibrations.
NOTICE
Q To ensure the intrusion sensor functions correctly
O Installing accessories other than genuine Toyota parts or leaving objects
between the driver’s seat and front passenger’s seat may reduce the
detection performance.
IO13PH008
IO13PH009
O To ensure that the sensors operate
properly, do not touch or cover them.
O Do not spray air fresheners or other
products directly into the sensor holes.

1212-2. Charging
2
Plug-in hybrid system
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
StatusPower
indicatorError
warning
indicator
Cause/Correction procedure
Charging
system errorNot
illuminatedNot
illuminated
or
illuminatedAn electrical leakage is
detected and charging is can-
celed, or there is a malfunction
in the charging cable.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer Illuminated Flashes
Plug
temperature
detection
malfunction
FlashesFlashes
There is a malfunction in the
plug temperature detection
part.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer
Plug
temperature
increase
detection
FlashesNot
illuminated
An increase in the temperature
of the plug is detected due to an
improper connection between
the socket and plug.
Check that the plug is
securely connected to the
socket.
Charging
cable life
span notice
IlluminatedFlashes
The number of charges using
the charging cable is nearing
the end of its usable life span.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer
Charging
cable life
span
IlluminatedIlluminated
The number of charges using
the charging cable has
exceeded its usable number of
charges.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer

1232-2. Charging
2
Plug-in hybrid system
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
With the release key fully
inserted into the release slot of
the CCID (Charging Circuit
Interrupting Device), turn the
plug-cord connector nut of the
plug-cord to remove the cord.
After the plug-cord is removed,
remove the release key.
Do not leave the vehicle alone with the plug-cord removed. If the plug-cord
is not installed, water or other foreign matter may enter the CCID
(Charging Circuit Interrupting Device), resulting in a malfunction.
Align the protrusion of the CCID
(Charging Circuit Interrupting
Device), with the groove of the
plug-cord, insert the plug-cord
into the CCID (Charging Circuit
Interrupting Device), and then
turn the plug-cord connector
nut of the plug-cord to install it.
Make sure that there are no foreign
objects attached to the connection
before installing the plug-cord.
Remove any foreign objects if they
are attached. Otherwise, water or
other foreign matter may enter the
CCID (Charging Circuit Interrupting
Device), resulting in a malfunction.
Turn the plug-cord connector nut of the plug-cord in the opposite direction
of removal until a click sound is heard and the plug-cord is secured.
Install the plug-cord connector cap and release key to the plug-cord
that has been removed.
Securely install the release key to the protection cap to prevent it from
being lost. Also, make sure that the release key does not fall out of the pro-
tection cap accidently.
Store the plug-cord in a safe, clean and dry place.
5
6
7

1262-2. Charging
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
For safety, inspect the charging cable on a routine basis.
QRating
O Voltage (Un): 220 V - 240 V ~
O Frequency: 50 Hz / 60 Hz 1Φ
O Current: 10 A
O Residual operating current (IΔn): 6 mA
O Ambient temperature: -30 °C to 55 °C
O IP67
Inspecting and maintaining the charging cable
WARNING
QRoutine inspection
Check the following points regularly.
Failure to do so may cause an unexpected accident, resulting in death or
serious injury.
O The charging cable, plug, charging connector, CCID (Charging Circuit
Interrupting Device) etc. have not been damaged
O The socket has not been damaged
O The plug can be securely inserted into the socket
O The plug does not get extremely hot during use
O The tip of the plug has not been deformed
O The plug is not dirtied by dust etc.
Remove the plug from the socket before inspecting it. If any ab normalities
are found in the charging cable as a result of the inspection, immediately
stop use and consult any authorized Toyota retailer or Toyota a uthorized
repairer, or any reliable repairer.
Q Maintaining the charging cable
When the charging cable is dirty, first remove the dirt with a hard, wringed
cloth, and then wipe the cable with a dry cloth.
However, never wash it with water. If the charging cable is was hed with
water, fire or electric shock may occur during charging, possib ly resulting in
death or serious injury.
Q When not using the charging cable for a long time
Remove the plug from the socket. Dust could accumulate on the p lug or in
the socket, possibly causing overheating which could lead to a fire.
Also, keep the cable in a place free from moisture.
Appendix (Mode 2 charging cable)

1532-2. Charging
2
Plug-in hybrid system
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
WARNING
QCaution when charging
People with implantable cardiac pacemakers or cardiac resynchro nization
therapy-pacemakers should not carry out the charging procedure. Ask
someone else to do it.
O Do not approach the charger and charging cable while charging.
Charging procedure may affect the operation of such devices.
O Do not remain in the vehicle during charging.
Charging procedure may affect the operation of such devices.
O Do not enter the vehicle even to take something out of the luggage com-
partment.
Charging procedure may affect the operation of such devices.
Q When the charging cable is connected to the vehicle
Do not operate the shift lever.
In the unlikely event that the charging cable has been damaged, the shift
position may change from P to another position and the vehicle could move,
possibly leading to an accident.
NOTICE
Q Precautions when handling charging cable
Make sure to observe the following precautions. Failure to obse rve these
precautions may result in damage to the charging cable and char ging inlet.
O Insert the charging connector straight into the charging inlet.
O After inserting the charging connector, do not apply excessive force to or
twist the connector. Also, do not lean on the connector or hang any objects
from it.
O Do not step on or trip over the charging cable.
O Before removing the charging connector, make sure that it is unlocked.
( P. 161)
O After removing the charging cable, promptly return it to its proper location.
O After removing the charging connector, securely install the charging inlet
cap.

1562-2. Charging
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
When using the Mode 3 charging cable (if equipped)
Remove the cap of the charging
plug and then connect the
charging plug to the charger.
When connecting the charging
plug into the charger, make sure
that the identification symbols are
the same.
Make sure to hold the body of the
charging plug and insert it firmly
and fully into the charger.
Follow the instructions of the char-
ger for details regarding how to
connect the charging cable and
how to start charging.
Depending on the charger, it may
be necessary to receive authoriza-
tion to use it. For details, refer to
the information of the charger.
Open the charging port lid.
( P. 1 1 2 )
The charging inlet light will illumi-
nate.
Remove the charging inlet cap
and secure it as shown in the
illustration.
2
Charging inlet lightP
Q

1572-2. Charging
2
Plug-in hybrid system
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
Remove the protective cap of
the charging connector and
secure it to the cable.
The illustration uses a Mode 2
charging cable as an example.
Make sure to hold the body of
the charging connector and
insert it firmly and fully into the
charging inlet.
When connecting the charging
connector into the charging inlet,
make sure that the identification
symbols are the same.
When the charging connector is
inserted straight as far as possible,
it will automatically lock.
Check that the charging indicator
illuminates. If the charging indica-
tor does not illuminate, the
charging connector is not locked.
*
If the charging connector is not
locked, remove and reinsert it.
After the charging connector is
locked, the charging connector
cannot be unlocked by pressing
the charging connector lock switch
if the electronic key is not in detec-
tion area of charging port lid.
(P. 284)
*: If the charging connector is not firmly inserted, locking operation will be
performed several times.
5
6

1622-2. Charging
Prius Plug-in Hybrid_OM_OM47E75E_(EE)
WARNING
QWhen charging
Observe the following precautions.
Failure to do so may cause an unexpected accident, resulting in death or
serious injury.
O Connect to a power source suitable for charging. (P. 139)
O Before charging, check that the charging inlet does not have deformations,
damage, corrosion, dust or other foreign materials such as snow or ice
adhering to it. If anything is adhering to the inlet, be sure t o completely
remove the material before connecting the charging connector.
O Mode 3 charging cable: Before inserting the charging plug into the char-
ger, make sure there is no dirt or dust on the terminal areas. If there is dirt
or dust on these areas, remove it completely before inserting t he charging
plug.
O Do not let the terminals of the charging inlet get wet.
O Make sure that the charging cable, plug and socket are free of foreign mat-
ter and not deformed or damaged.
O Only use sockets where the plug can be securely inserted.
O Do not charge if the charging cable is coiled or bundled.
O Wrapping the charging cable while in-use is not recommended because
cable may overheat. Failure to rewrap charging cable when not i n-use
could result in strangulation or tripping hazard.
O Do not touch the terminals of the charging connector and charging inlet
with a sharp metal objects (needles etc.) or hands, or short th em with for-
eign objects.
O When charging outdoors, make sure to connect to a rain-tight socket for
outdoor use.
Ensure the rain-tight cover closes completely. If the rain-tigh t cover cannot
be closed, install a rain-ti ght cover that will close.
O If any heat, smoke, odors, noise or other abnormalities are noticed during
charging, stop charging immediately.
O Do not insert the plug if the socket is submerged in water or snow.
O When charging during rain or snow, do not pull out or insert the plug with
wet hands. Also, do not get the electrical socket and plug wet.
O Do not charge the vehicle during a lightning storm.
O Do not let the wheels on the charging cable, plug, charging connector and
CCID (Charging Circuit Interrupting Device).
O Firmly insert the plug into the socket.
O Do not use an extension cord and converting adaptor.