2022 TOYOTA PRIUS wheel

PRIUS_OM_OM47F01U_(U)
1112. Instrument cluster
2
Instrument cluster
Dynamic radar cruise control indicator (if
equipped)P. 321
Cruise control “SET” indicatorP. 321,
337
AFS OFF indicator (if equipped) P. 259,
591
*1, 3PCS warning light (if equipped) P. 295
*4LTA indicator (if equipped) P. 311
Steering control indicator (if equipped)P. 311
Automatic High Beam indicator (if equipped) P. 262
Heated steering wheel indicator (if equipped) P. 451
“BSM” indicator (if equipped)P. 344
Intuitive parking assist indicator (if equipped) P. 358
*1, 3PKSB OFF indicator (if equipped)P. 372
*1S-APGS indicator (if equipped) P. 385
*1“AIR BAG ON/OFF” indicator (U.S.A.) P. 49
*1“AIR BAG ON/OFF” indicator (Canada)P. 49
IndicatorsPages

PRIUS_OM_OM47F01U_(U)
1432. Instrument cluster
2
Instrument cluster
◆AWD display (for AWD vehicles only)
Displays the drive status of each wheel in 6 steps from 0 to 5.
Front-left wheel drive status
Front-right wheel drive status
Rear-left wheel drive status
Rear-right wheel drive status
How to read the driv e status display:
■About drive status display
●Indicates the drive status of each wheel by the number of bars based on the
driving conditions and AWD system.
● When the drive power to each wheel is large, the number of bars increases,
and when the drive power is small the number of bars decreases.
● When the number of bars to the rear wheels is small, the system determines
that stable driving is being performed and the AWD function is suppressed
to increase fuel economy.
1
2
3
4
Drive statusNot being drivenMaximum drive power
Indicators

PRIUS_OM_OM47F01U_(U)
1512. Instrument cluster
2
Instrument cluster
The operation contents of the driving support systems and settings
related to the com bination meter disp lay can be changed.
Driving support systems such as the PCS (Pre-Collision System) (if
equipped) and Blind Spot Monitor (if equipped) is turned on and off by sim-
ply pressing . Make sure not to cancel the systems accidentally .
■
Setting procedure
Press or of the meter cont rol switches on the steering
wheel and select .
Press or of the meter control switches and select the
item to change, and then press .
If the function is turned on and
off or the sensitivity, etc. is
changed on the setting screen,
the setting is changed each time
the is pressed.
For functions that allow opera-
tion contents, display contents,
etc., of a function to be selected,
the setting screen is displayed.
When the setting screen is displayed, select the setting or
desired value (time, etc.) wit h the meter control switches.
*1, 2
For selectable operation con-
tents and setting values, select
the desired setting or value, and
then press .
To stop the selection, press .
When the setting check screen
is displayed, select proceed or
cancel and press .
*1: Depending on the items, a subsequent setting screen may be dis played
after selecting an item.
*2: For items which set the adjustment level or time, after the it em is set,
the setting screen remains displayed until is pressed.
Settings display
1
2
3

PRIUS_OM_OM47F01U_(U)
1612. Instrument cluster
2
Instrument cluster
■Insert displays of the driving support systems
Insert displays are linked wit h the operation of the following sys-
tems and used to show some of the information shown on the mult i-
information display on the head-up display.
*: If equipped
■
Master warning light insert display
When the master warning light
(  P. 591) is illuminated or
flashing, an insert display is
shown on the head-up display
to inform the driver.
When the master warning light
is illuminated or flashing, check
the message displayed on the
multi-information display and
perform the corresponding trou-
bleshooting procedure.
( P. 599)
Insert display
SystemDisplayed information
PCS (Pre-Collision System)* ( P. 291)Pre-collision warning
LTA (Lane Tracing Assist)* (P. 302)
Lane departure alert function
display
Hands off steering wheel warn-
ing
Vehicle sway warning function
display
Dynamic radar cruise control with full-
speed range
* (P. 321)Approach warning display
RSA (Road Sign Assist) ( P. 317)Road signs
Parking Support Brake function*
(  P. 3 7 0 )Operation display
(symbol display)

175
PRIUS_OM_OM47F01U_(U)
3
Operation of
each component
3-1. Key information
Keys .................................. 176
3-2. Opening, closing and locking the doors
Side doors ......................... 181
Back door .......................... 187
Smart key system ............. 192
3-3. Adjusting the seats Front seats ........................ 198
Rear seats......................... 200
Head restraints.................. 203
3-4. Adjusting the steering wheel and mirrors
Steering wheel .................. 206
Inside rear view mirror ...... 208
Outside rear view mirrors ............................. 210
3-5. Opening and closing the windows and moon roof
Power windows ................. 212
Moon roof .......................... 217

2063-4. Adjusting the steering wheel and mirrors
PRIUS_OM_OM47F01U_(U)
Steering wheel
Hold the steering wheel and
push the lever down.
Adjust to the ideal position by
moving the steering wheel hori-
zontally and vertically.
After adjustment, pull the lever up
to secure the steering wheel.
To sound the horn, press on or
close to the mark.
Adjustment procedure
1
2
Horn

2073-4. Adjusting the steering wheel and mirrors
3
Operation of each component
PRIUS_OM_OM47F01U_(U)
WARNING
■Caution while driving
Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and caus e an acci-
dent, resulting in death or serious injury.
■ After adjusting the steering wheel
Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causi ng an
accident, and resulting in death or serious injury. Also, the horn may not
sound if the steering wheel is not securely locked.

2083-4. Adjusting the steering wheel and mirrors
PRIUS_OM_OM47F01U_(U)
Inside rear view mirror
The height of the rear view mirror can be adjusted to suit your driving
posture.
Adjust the height of the rear view
mirror by moving it up and down.
Manual anti-glare inside rear view mirror
Reflected light from the headlights of vehicles behind can be r educed
by operating the lever.
Normal position
Anti-glare position
The rear view mirror’s position ca n be adjusted to enable suffi-
cient confirmation of the rear view.
Adjusting the height of rear view mirror
Anti-glare function
1
2