2022 TOYOTA PRIUS warning lights

511-1. For safe use
PRIUS_OM_OM47F01U_(U)
1
For safety and security
■Unoccupied
■There is a malfunction in the system
*1: The system judges a person of adult size as an adult. When a smaller
adult sits in the front passenger seat, the system may not recognize him/
her as an adult depending on his/her physique and posture.
*2: In the event the front passenger is wearing a seat belt.
*3: In the event the front passenger does not wear a seat belt.
*4: For some children, child in seat, child in booster seat or chi ld in convertible
seat, the system may not recognize him/her as a child. Factors which may
affect this can be the physique or posture.
*5: Never install a rear-facing child restraint system on the front passenger seat. A forward-facing child restraint system should only be in stalled on the
front passenger seat when it is unavoidable. ( P. 60)
*6: In case the indicator light is not illuminated, consult this m anual on how to
install the child restraint system properly. ( P. 56)
Indicator/
warning light
“AIR BAG ON” and “AIR BAG OFF” indicator lights“AIR BAG OFF”
SRS warning lightOffSeat belt reminder light
Devices
Front passenger airbagDeactivated
Seat cushion airbag in the front passenger sideDeactivated
Indicator/
warning light
“AIR BAG ON” and “AIR BAG OFF”
indicator lights“AIR BAG OFF”
SRS warning lightOnSeat belt reminder light
Devices
Front passenger airbagDeactivated
Seat cushion airbag in the front passenger sideDeactivated

97
PRIUS_OM_OM47F01U_(U)
Instrument cluster2
2. Instrument clusterCombination meter.............. 98
Warning lights and indicators ........................ 107
Main display ...................... 115
Multi-information display............................. 124
Head-up display ................ 158
Energy monitor/ consumption screen
(vehicles with 7-inch
display) ........................... 165
Energy monitor/ consumption screen
(vehicles with
11.6-inch display) ............ 170

98
PRIUS_OM_OM47F01U_(U)
2. Instrument cluster
Combination meter
The units used on the display may differ depending on the target region.
Main display (P. 115)
The main display shows basic information related to driving, su ch as the
vehicle speed and remaining fuel amount.
Multi-information display ( P. 124)
The multi-information display shows information which makes the vehicle
convenient-to-use, such as the hybrid system operation conditio n and fuel
consumption history. Also, the operation contents of the drivin g support
systems and the combination meter display settings can be chang ed by
switching to the settings screen.
Warning lights and indicators ( P. 1 0 7 )
The warning lights and indicators comes on or flashes to indicate problems
with the vehicle or to show the operation status of the vehicle ’s systems.
Clock (P. 103)
The large meter uses 2 liquid crystal displays to display infor ma-
tion such as the vehicle conditi on, driving status and fuel con-
sumption.
Combination meter layout
1
2
3
4

107
PRIUS_OM_OM47F01U_(U)
2. Instrument cluster
2
Instrument cluster
Warning lights and indicators
The warning lights and indicators inform the driver of the status
of the vehicle’s various systems.
For the purpose of explanation, t he following illustration dis-
plays all indicators and wa rning lights illuminated.

108
PRIUS_OM_OM47F01U_(U)
2. Instrument cluster
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
Warning lightsPages
*1Brake system warning light (U.S.A.) P. 588
*1Brake system warning light (Canada)
(Red)P. 588
*1Brake system warning light
(Yellow)P. 588
*1Charging system warning light
P. 588
*1Low engine oil pressure warning lightP. 588
*1Malfunction indicator lamp (U.S.A.) P. 588
*1Malfunction indicator lamp (Canada)P. 588
*1SRS warning light P. 589
*1ABS warning light (U.S.A.) P. 589
*1ABS warning light (Canada)P. 589
*1Electric power steering system warning light
(Red/yellow)P. 589
*1,2PCS warning light (if equipped)
P. 589
LTA indicator (Orange) (if equipped)P. 589
*1Slip indicator light P. 590

PRIUS_OM_OM47F01U_(U)
1092. Instrument cluster
2
Instrument cluster
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the veh icle
inspected by your Toyota dealer.
*2: The light flashes or illuminates to indicate a malfunction.
*3: The light flashes to indicate a malfunction.
*1High coolant temperature warning light P. 590
*1, 3PKSB OFF indicator (if equipped)P. 590
Open door warning light P. 590
Low fuel level warning lightP. 590
Driver’s and front passenger’s seat belt
reminder light P. 591
Rear passengers’ seat belt reminder light
(U.S.A.)P. 591
Rear passengers’ seat belt reminder light
(Canada)P. 591
*1Master warning light
P. 591
*1Tire pressure warning lightP. 591
Warning lightsPages

2093-4. Adjusting the steering wheel and mirrors
3
Operation of each component
PRIUS_OM_OM47F01U_(U)
Auto anti-glare inside rear view mirror
Responding to the level of brightness of the headlights of vehi cles
behind, the reflected light is automatically reduced.
Changing automatic anti-glare
function mode
On/off
When the automatic anti-glare
function is in ON mode, the indica-
tor illuminates.
The function will set to ON mode
each time the power switch is
turned to ON mode.
Pressing the button turns the func-
tion to OFF mode. (The indicator
also turns off.)
■ To prevent sensor error (vehicles with auto anti-glare inside r ear view
mirror)
Indicator
To ensure that the sensors operate prop-
erly, do not touch or cover them.
WARNING
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident,
resulting in death or serious injury.

262
PRIUS_OM_OM47F01U_(U)
4-3. Operating the lights and wipers
AHB (Automatic High Beam)
Push the lever away from you
with the headlight switch in the or position.
Press the Automatic High
Beam switch.
The Automatic High Beam indica-
tor will come on when the head-
lights are turned on automatically
to indicate that the system is
active.
: If equipped
The Automatic High Beam uses an in-vehicle front camera to
assess the brightness of streetl ights, the lights of vehicles
ahead etc., and automatically turns the high beam on or off as
necessary.
WARNING
■ Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, ta king care to
observe your surroundings and turning the high beam on or off m anually if
necessary.
■ To prevent incorrect operation of the Automatic High Beam syste m
Do not overload the vehicle.
Activating the Automatic High Beam system
1
2