Page 491 of 582

29
3
3-2. Other settings
Settings
3-2.Other settings
1 Press the button.
2 Select “Settings”.
3 Select “General”.
4 Select the items to be set.
“Clock”*
“Driver Profiles”: Select to set
the Driver Profile function set-
tings. ( P. 3 0 )
“Display”: Select to adjust the
contrast, brightness, etc. of the
display. ( P. 3 0 )
“Wi-Fi”: Select to set the Wi-Fi®
function settings. ( P.32)
“Reminder Screen”: Select to
turn the reminder screen (“Main-
tenance”, “Birthday” and “Anni-
versary”) on/off.
“Meter Screen”*
“Camera”*
“Language”*
“Home Screen Shortcuts”:
Select to turn the home screen
shortcuts function on/off.
( P. 1 6 )
“Birthday List”: Select to set the
birthday list settings. ( P.31)
“Anniversary List”: Select to set
the anniversary list settings.
( P. 3 2 )
“Software Update”: Select to
update system software ver-
sions. ( P. 3 4 )
“Factory Data Reset”: Select to
reset all setup items.The
audio/visual system restarts
automatically after resetting fac-
tory data. To complete the reset
process, turn the engine switch
to Off after the audio/visual sys-
tem has restarted, and then turn
to ACC or ON after approxi-
mately 3 minutes.
“System Information”: Select to
display the system information.
“Free/Open Source Software
General settings
General settings screen
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Page 496 of 582

343-2. Other settings
The system can connect to a
Wi-Fi® network that supports the
following standards.
Communication standards:
•802.11b
•802.11g
• 802.11n (2.4GHz)
Security:
•WPATM
•WPA2TM
●WPA and WPA2 are registered mark
of the Wi-Fi Alliance®.
Please ask your dealer to update
the system software*1.
You may also update the system
software via Wi-Fi®. The update
process involves downloading and
installing a software update*2. Note
that system functionality will be
restricted during installation.
*1: Please check with your dealer for
specific details on the update con-
tent.
*2: Depending on the software update
content, your radio station presets
and volume settings may be reset by
the update process.
●Update using Wi-Fi® may not be avail-
able in some countries.
1 Press the button.
2 Select “Settings”.
3 Select “General”.
4 Select “Clock”.
5 Select “Time Setting”.
6 Select “Sync With Phone”.
7 Connect to a Wi-Fi® network.
( P. 3 2 )
8 Display the general settings
screen. ( P. 2 9 )
9 Select “Software Update”.
10 Select “Update”.
11 Select “Check for Updates”.
“Cancel”: Select to stop checking
for available updates.
If “Automatically Check for
Updates” is on, updates will
automatically be checked for
and, if availabl e, a message will
be displayed. If a message is
displayed, select “OK” and pro-
ceed to the next step.
If “Automatically Download
Updates” is on, updates will
automatically be downloaded.
After the download has com-
pleted, a message will be dis-
played. Select “OK” to start
installation and proceed to STEP
3 in “Update installation”.
( P. 3 5 )
Supported Wi-Fi® network
specifications
Updating the system
Download update
Page 563 of 582

101
8
8-1. What to do if...
What to do if...
SymptomCauseSolution
“A software download
error occurred. Please try
again.” is displayed.
The set time of the clock
and actual time differ
greatly.
Set the clock to the correct
time.
Move the vehicle to an area
where mobile phone recep-
tion is good.
An error occurred at the
server. (Server cannot
respond temporarily due to
maintenance, etc.)
Wait for the server to return
to normal.
“No server response.
Please try again.” is dis-
played.
The connection between
the system and the Wi-Fi®
access point is weak or
has been lost.
Connect the system to the
Wi-Fi® access point again
and perform the update in
an area with low electrical
noise.
Communication between
the Wi-Fi® access point
and server has been lost.
Check that the Wi-Fi®
access point can connect
to the internet and perform
the update in an area with
low electrical noise.
“Connection failed. Una-
ble to check for updates
because no active internet
connection has been
detected.” is displayed.
The connection between
the system and the Wi-Fi®
access point is weak or
has been lost.
Connect the system to the
Wi-Fi® access point again
and perform the update in
an area with low electrical
noise.