2022 TOYOTA BZ4X power meter

1
6
5
4
3
2
8
7
9
Owners Manual_Europe_M42D76_en
Pictorial indexSearch by illustration
For safety
and security
Make sure to read through them
(Main topics: Child seat, theft deterrent system)
Electric Vehicle
system
Reading charging-related information
(Main topics: Electric Vehicle system, charging methods)
Vehicle status
information and
indicators
Reading driving-related information
(Main topics: Meters, multi-information display)
Before drivingOpening and closing the doors and windows, adjustment
before driving
(Main topics: Keys, doors, seats, power windows)
DrivingOperations and advice which are necessary for driving
(Main topics: Starting Electric Vehicle system, driving support
systems)
Interior featuresUsage of the interior features
(Main topics: Air conditioner, storage features)
Maintenance
and care
Caring for your vehicle and maintenance procedures
(Main topics: Interior and exterior, light bulbs)
When trouble
arises
What to do in case of malfunction and emergency
(Main topics: 12-volt battery discharge, flat tire)
Vehicle
specifications
Vehicle specifications, customizable features
(Main topics: Fluids, tire inflation pressure)
IndexSearch by symptom
Search alphabetically

2
Owners Manual_Europe_M42D76_en
TABLE OF CONTENTS
For your information ........................6
Reading this manual........................ 9
How to search ............................... 10
Pictorial index ................................ 12
1-1. For safe use
Before driving........................ 32
For safe driving ..................... 33
Seat belts .............................. 35
SRS airbags.......................... 39
1-2. Child safety
Airbag manual on-off system 47
Riding with children............... 48
Child restraint systems ......... 49
1-3. Emergency assistance
eCall...................................... 65
1-4. Theft deterrent system
Immobilizer system ............... 75
Double locking system .......... 76
Alarm .................................... 77
2-1. Electric vehicle system
Electric Vehicle system features
............................................ 82
Electric Vehicle system precau-
tions .................................... 86
Battery Electric Vehicle driving
tips ...................................... 91
Driving range ........................ 93
2-2. Charging
Charging equipment ............. 95
AC charging cable ................ 98
Locking and unlocking AC
charging connector ........... 110
Power sources that can be used
.......................................... 112
Charging methods .............. 114
Charging tips....................... 116
Things to know before charging
.......................................... 118
How to use AC charging ..... 121
How to use DC charging ..... 129
Using the charging schedule
function ............................. 134
Using My Room Mode ........ 145
Solar charging system ........ 148
When charging cannot be car-
ried out.............................. 152
3-1. Instrument cluster
Warning lights and indicators
.......................................... 168
Gauges and meters ............ 172
Multi-information display ..... 175
4-1. Key information
Keys .................................... 182
4-2. Opening, closing and locking
the doors
Side doors........................... 185
Back door............................ 189
1For safety and security
2Electric Vehicle system
3Vehicle status information
and indicators
4Before driving

15
Owners Manual_Europe_M42D76_en
Pictorial index
■Instrument panel (left-hand drive vehicles)
Power switch ..................................................................................P.243
Starting the EV system/changing the modes ...................... .....P.243, 246
Emergency stop of the EV system ................................ ...................P.506
When the EV system will not start .............................. .....................P.539
Warning messages ............................................... ...........................P.523
Rotary shifter................................................. .................................P.248
Changing the shift position.................................... ...........................P.248
Precautions against towing ..................................... .........................P.509
Meters ......................................................... ....................................P.172
Reading the meters/adjusting the instrument panel lights ....... P.172, 175
Warning lights/indicator lights ................................ ..........................P.168
When the warning lights come on ................................ ....................P.515
Multi-information display ...................................... ........................P.175
Display ........................................................ .....................................P.175

23
Owners Manual_Europe_M42D76_en
Pictorial index
■Instrument panel (right-hand drive vehicles)
Power switch ..................................................................................P.243
Starting the EV system/changing the modes ...................... .....P.243, 246
Emergency stop of the EV system ................................ ...................P.506
When the EV system will not start .............................. .....................P.539
Warning messages ............................................... ...........................P.523
Rotary shifter................................................. .................................P.248
Changing the shift position.................................... ...........................P.248
Precautions against towing ..................................... .........................P.509
Meters ......................................................... ....................................P.172
Reading the meters/adjusting the instrument panel lights ....... P.172, 175
Warning lights/indicator lights ................................ ..........................P.168
When the warning lights come on ................................ ....................P.515
Multi-information display ...................................... ........................P.175
Display ........................................................ .....................................P.175

109
2
Owners Manual_Europe_M42D76_en
2-2. Charging
Electric Vehicle system
■Caution symbols
■Information symbols
Do not subject the AC charging cable, charging connector,
plug or CCID (Charging Circuit Interrupting Device) to strong
force or impact.
Do not place heavy objects on the AC charging cable,
charging connector, plug or CCID (Charging Circuit Interrupt-
ing Device).
Do not use this device if the AC charging cable is frayed, has
broken insulation, or any other signs of damage.
Do not wind the power cord or AC charging cable around the
CCID (Charging Circuit Interrupting Device) or charging con-
nector.
This device may not operate if used with IT or other unearthed
systems such as an isolated winding generator or isolating
transformer.
This device has a non-switched protective conductor.
Do not use this device at an altitude over 4000 meter.

115
2
Owners Manual_Europe_M42D76_en
2-2. Charging
Electric Vehicle system
days and the traction battery heater
automatically stops. It automatically
insulates the traction battery in
extremely low temperatures.
 This control stops 31 days after
the charging cable is connected,
even if it is still connected to the
vehicle.
 When this control operates,
charging schedule settings are
ignored and charging starts
immediately.
■Traction battery cooler
When the traction battery is hot and
the AC charging cable is connected
to the vehicle, this function cools
the traction battery to protect it.
The function may operate when
continuously driving at high speeds
such as driving on highways or
freeways, or during DC charging.
■Using My Room Mode during DC charging
 P. 1 4 6
■Traction battery heater
●Traction battery heater may operate when charging is not being performed.
●When Traction battery heater is oper-ating, the charging indicator will illumi-
nate.
●When Traction battery heater is oper-
ating during charging, the charging may take longer than normal.
●The remaining charge of the traction battery declines when the traction bat-tery heater operates, it might be nec-
essary to recharge the traction battery again in order to supplement the remaining charge.
■Traction battery cooler
●For AC charging: Traction battery cooler settings can be changed on the
multi-information display. ( P.115)
●The charging indicator will illuminate
when the traction battery cooler is on standby or operating.
●When the charge level of the traction battery is low, the traction battery cooler may not operate, even if the
temperature of the traction battery is high.
●When the following conditions are met while the traction battery cooler is operating, the cooling operation will
stop. • The hood is opened• The power switch is turned to ACC or
ON. • The shift position is changed to any position other than P
• The Remote Air Conditioning System is operated ( P.427) • The remaining charge of the traction
battery drops below a certain amount
●The traction battery cooler operates
using power supplied by the traction battery and an external power source.• While the traction battery cooler is
operating, the charge of the traction battery will increase and decrease within a certain range, and will not
increase as during AC charging. • When the traction battery cooler oper-ates, charger will recognize it as the
battery being charged. If this function operates while a charger which charges a charging fee is connected
to the vehicle, AC charging fees will apply.
■Changing of the traction battery cooler setting
Setting can be changed on the
multi-information display.
Use the meter control switches
( P.176) and select “Vehicle Settings”, “Charging Settings”, “Battery Cooler”, and change the setting.

124
Owners Manual_Europe_M42D76_en
2-2. Charging
■Safety function
Charging will not start when the charging connector is not locked.
If the charging indicator does not illumi-
nate even when the charging connector is inserted, remove and reinsert the con-nector, and then check that the charging
indicator of the charging port illuminates.
■Charging time may increase
 P. 1 2 0
■Charging at a public charging sta- tion with authentication function
When a door is unlocked during charging, the charging connector is unlocked and charging will be stopped.
In this case, the charging station authentication is canceled and charging may not be able to restart. Reconnect
the charging connector and perform authentication for the charging station.
■When your circuit breaker trips during charging
The upper limit of the charging current can be changed on the multi-information display or multimedia.
●Setting operations on multi-informa-tion display
1 Press or of the meter control
switches to select .
2 Press or of the meter control
switches to select “Vehicle Settings”,
and then press and hold .
3 Press or of the meter control
switches to select “Charging Set-
tings”, and then press .
The “Charging Settings” screen will be displayed.
4 Press or of the meter control
switches to select “Charging Cur-
rent”, and then press .
The “Charging Current” screen will be
displayed.
5 Press or of the meter control
switches to select “16A” or “8A” and
then press .
●Setting operations on multimedia
1 Select .
2 Select “Vehicle customize”.
3 Select “Charging”.
4 Select “Charging current”.
5 Select “16A” or “8A”.
The maximum charging current is lim-
ited to less than or equal to the selected
current.*
If the breaker still trips while charging,
even after changing the upper limit of the charging current, check if the con-nected power source meets the speci-
fied charging conditions. ( P.112)*: Restricting the charging current will
lengthen the charging time.
■Changing the “Charging Limit” set- tings
The upper limit of the charge capacity
can be changed on the multi-information display or multimedia.
The selected upper limit value is com-
mon to AC charging and DC charging.
●Setting operations on multi-informa-
tion display
1 Press or of the meter control
switches to select .
2 Press or of the meter control
switches to select “Vehicle Settings”,
and then press and hold .
3 Press or of the meter control
switches to select “Charging Set-
tings”, and then press .

125
2
Owners Manual_Europe_M42D76_en
2-2. Charging
Electric Vehicle system
The “Charging Settings” screen will be
displayed.
4 Press or of the meter control
switches to select “Charging Limit”,
and then press .
The “Charging Limit” screen will be dis- played.
5 Select “Full”, “90%”, “80%”, “70%”,
“60%” or “50%” and then press .
●Setting operations on multimedia
1 Select .
2 Select “Vehicle customize”.
3 Select “Charging”.
4 Select “Charging limit”.
5 Select “Full”, “90%”, “80%”, “70%”, “60%” or “50%”.
If the setting is changed during DC charging, charging may stop due to the operation of the DC charger timer and
the traction battery cannot be fully charged.
■Protection function of AC charging inlet overheating
By installing a temperature sensor to the AC charging inlet, prevents parts from melting when the temperature rises due
to foreign matter entering the charging connector.
When a certain temperature increase is
detected, charging is stopped immedi- ately.
After this, when the power switch is off,
a message will be displayed on the multi-information display ( P.160)
WARNING
■When charging
Observe the following precautions.
Failure to do so may cause an unex- pected accident, resulting in death or serious injury.
●Connect to a power source suitable for charging. ( P.112)
●Check that the AC charging cable, plug and socket are free of foreign matter.
●Before charging, check that the AC charging inlet is not deformed,
damaged or corroded, and check that the inlet is free of foreign mat-ter such as dirt, snow and ice.
If there is dirt or dust in these areas, remove completely before inserting the charging connector.
●Before inserting the charging plug into the charger, make sure there is
no dirt or dust on the terminal areas. If there is dirt or dust in these areas, remove completely before
inserting the charging plug.
●Do not get the terminals of the AC
charging inlet wet.
●Only use sockets where the plug
can be securely inserted.
●Do not bundle or wind the AC
charging cable while charging, as doing so may result in overheating.
●Do not touch the terminals of the charging connector and AC charging inlet with a sharp metal
objects (needles, etc.,) or hands, or short them with foreign objects.