
7
Eco-driving
Eco-driving
Eco-driving refers to a range of everyday 
practices that allow the motorist to optimise 
the vehicle's energy consumption (fuel and/or 
electricity) and CO
2 emissions.
Optimise your use of the gearbox
With a manual gearbox, move off gently and 
change up promptly. While accelerating, change 
up early.
With an automatic gearbox, favour automatic 
mode. Do not depress the accelerator pedal 
heavily or suddenly.
The gear shift indicator prompts you to engage 
the most suitable gear. Whenever this indication 
is displayed on the instrument panel, follow it 
straight away.
With an automatic gearbox, this indicator 
appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use 
engine braking rather than the brake pedal and 
press the accelerator gradually. These practices 
help to save on energy consumption, reduce 
CO
2 emissions and decrease general traffic 
noise.
When the traffic is flowing smoothly, select the 
cruise control.
Control the use of electrical equipment
Before moving off, if the passenger compartment 
is too warm, ventilate it by opening the windows 
and air vents before using the air conditioning.
At speeds above 31
  mph (50   km/h), close the 
windows and leave the air vents open.
Consider using equipment that can help keep 
the temperature in the passenger compartment 
down (e.g.
  sunroof blind, window blinds).
Unless automatically regulated, switch off the air 
conditioning as soon as the desired temperature 
has been reached.
Switch off the demisting and defrosting functions, 
if they are not managed automatically.
Switch off the heated seat as soon as possible.
Adapt your use of the headlamps and/or 
foglamps to the level of visibility, in accordance 
with current legislation in the country in which 
you are driving.
Avoid running the engine before moving off, 
particularly in winter (other than in severe wintry 
conditions: temperature below -23°C). The 
vehicle will warm up much faster while driving.
As a passenger, avoid connecting your 
multimedia devices (e.g.
  film, music, video 
game) to help reduce the consumption of energy.
Disconnect all portable devices before leaving 
the vehicle.
Limit the causes of excess consumption
Spread loads throughout the vehicle. Place the 
heaviest items in the boot as close as possible to 
the rear seats. Limit the loads carried in the vehicle and 
minimise wind resistance (e.g.
  roof bars, roof 
rack, bicycle carrier, trailer). Preferably, use a 
roof box.
Remove roof bars and roof racks after use.
At the end of winter, remove snow tyres and refit 
summer tyres.
Avoid using the Dynamic Pack for too long, in 
order to limit your energy consumption.
Comply with the servicing instructions
Check tyre pressures regularly, with the tyres 
cold, referring to the label in the door aperture on 
the driver's side.
Carry out this check in particular:
–
 
before a long journey
 .
–
 
at each change of season.
–
 
after a long period out of use.
Do not forget the spare wheel and, where 
applicable, the tyres on your trailer or caravan.
Have your vehicle serviced regularly (e.g.
  engine 
oil, oil filter, air filter, passenger compartment 
filter, etc.). Observe the schedule of operations in 
the manufacturer's service schedule.
With a BlueHDi Diesel engine, if the SCR system 
has a fault, your vehicle will emit pollution. Visit 
a PEUGEOT dealer or a qualified workshop 
as soon as possible to restore your vehicle's 
nitrogen oxide emissions to legal levels.
When filling the fuel tank, do not continue after 
the third cut-out of the nozzle, to avoid overflow.  

9
Instruments
1Head-up digital display
This digital instrument panel can be customised.
Depending on the display mode selected, certain 
information is hidden or presented differently.
Example with the "DIALS"
  display mode:
 
 
1.Fuel gauge
2. Analogue speedometer (mph or km/h)
3. Gear shift indicator
Selector position and gear engaged on 
automatic gearbox
4. Digital speedometer (mph or km/h)
5. Cruise control or speed limiter settings
Display of speed limit signs
6. Rev counter (x 1,000 rpm)
7. Engine coolant temperature indicator (°C)
8. Trip distance recorder (miles or km)
9. Total distance recorder (miles or km)
A. Instrument panel ambient lighting on/off
B. Short press: start a manual test
Long press: reset the service indicator or trip 
distance recorder (depending on the context)
Head-up digital display 
(Rechargeable hybrid)
This digital instrument panel can be customised.
Depending on the display mode selected, certain 
information is hidden or presented differently.
Example with the " ÉNERGIE"
  display mode:
 
 
1.Fuel gauge and remaining range (miles or 
km)
2. Digital speedometer (mph or km/h)
READY indicator lamp 
3. Status of the gearbox 
4. Energy flows
5. Driving mode selected
6. Power indicator
7. Battery charge level and remaining range 
(miles or km)
8. Trip distance recorder (miles or km)
9. Total distance recorder (miles or km)
A. Instrument panel ambient lighting on/off
B. Short press: start a manual test
Long press: reset the service indicator or trip 
distance recorder (depending on the context)
In all-electric driving mode, the speed is 
displayed in blue.
Displays
Most warning and indicator lamps do not have a 
fixed position.
The warning and indicator lamps in the second 
line are displayed from right to left in order of 
priority.
For certain functions that have indicator lamps 
for both operation and deactivation, there is only 
one dedicated location.
Permanent information
In the standard display, the instrument panel 
shows:
–
 
in fixed locations:
•
 
Information related to the gearbox and gear 
shift indicator
.
•
 
Fuel gauge.
•
 
Coolant temperature indicator (Petrol or 
Diesel).
•
 
Charge level and range indicator 
(Rechargeable hybrid).
•
 
Distance recorders.
–
 
in variable locations:
•
 
Digital speedometer
 .
•
 
Status or alert messages displayed 
temporarily
.
Optional information
Depending on the selected display mode and 
active features, additional information may be 
displayed:
– 
Rev counter (Petrol or Diesel).
–
 
T
 rip computer.  

12
Instruments
12V battery chargeFixed.
The battery charging circuit is faulty 
(e.g.
 
dirty terminals, loose or severed alternator 
belt).
Carry out (1).
If the electric parking brake stops working, 
immobilise the vehicle:
►
 
With the manual gearbox, engage a gear
 .
►
 
With the automatic gearbox, fit the chocks 
against one of the wheels.
Clean and tighten the terminals. If the warning 
lamp does not go off when the engine is started, 
carry out (2).
Door(s) openFixed, associated with a message 
identifying the access.
A door or the tailgate is not properly closed 
(speed less than 6 mph (10 km/h)).
Fixed, associated with a message 
identifying the access, accompanied by 
an audible signal.
A door or the tailgate is not properly closed 
(speed above 6 mph (10 km/h)).
Seat belts not fastened/unfastenedFixed or flashing, accompanied by an 
increasing audible signal.
A seat belt has not been fastened or has been 
unfastened.
Electric parking brakeFixed.
The electric parking brake is applied.
Flashing.
Application/release is faulty.
Carry out (1): park on flat ground (on a level 
surface). 
With a manual gearbox, engage a gear.
With an automatic gearbox, select mode
 
P
 .
Switch off the ignition and carry out (2).
BrakingFixed.
The brake fluid level in the braking circuit 
has dropped significantly.
Carry out (1), then top up with fluid that complies 
with the manufacturer's recommendations. If the 
problem persists, carry out (2).
Fixed.
The electronic brake force 
distribution
 
(EBFD) system is faulty.
Carry out (1) and then (2).
Orange warning/indicator lamps
Service
Temporarily on, accompanied by the  display of a message.
One or more minor faults, for which there is/are 
no specific warning lamp(s), have been detected.
Identify the cause of the fault using the message 
displayed on the instrument panel.
You may be able to deal with some faults 
yourself, such as changing the battery in the 
remote control.
For other faults, such as with the tyre under-
inflation detection system, carry out (3).
Fixed, accompanied by the display of a 
message.
One or more major faults, for which there is/are 
no specific warning lamp(s), have been detected.
Identify the cause of the fault using the message 
displayed on the instrument panel, then carry 
out (3).
Fixed, accompanied by the message 
"Parking brake fault".
Automatic release of the electric parking brake is 
unavailable.
Carry out (2).
Service warning lamp fixed and 
service spanner flashing then 
fixed.
The servicing interval has been exceeded.
The vehicle must be serviced as soon as 
possible.
Only with BlueHDi Diesel engines.
Engine pre-heating (Diesel)Temporarily on (up to approximately 30 seconds in 
severe weather conditions).
When switching on the ignition, if the weather 
conditions and the engine temperature make it 
necessary.
Wait until the warning lamp goes off before 
starting.
When the warning lamp goes off, starting will 
occur immediately if you press and hold:
–
 
the clutch pedal with a manual gearbox.
–
 
the brake pedal with an automatic gearbox.  

15
Instruments
1Dynamic stability control (DSC)/Anti-slip 
regulation (ASR)
Fixed.
The system is deactivated.
The DSC/ASR system is reactivated 
automatically when the vehicle is restarted, 
and at speeds above approximately 31 mph 
(50
 
km/h).
At speeds below 31
  mph (50   km/h), it can be 
reactivated manually.
Flashing.
DSC/ASR regulation is activated in the 
event of a loss of grip or trajectory.
Fixed.
The DSC/ASR system has a fault.
Carry out (3).
Emergency brake malfunction (with 
electric parking brake)
Fixed, accompanied by the 
message "Parking brake fault".
Emergency braking does not deliver optimal 
performance.
If automatic release is not available, use manual 
release or carry out (3).
Hill start assistFixed, accompanied by the 
message "Anti roll-back system 
fault".
The system has a fault.
Carry out (3).
Lane Departure Warning SystemFlashing, accompanied by an audible 
signal.
A lane marking has been crossed on the left or 
right.
Turn the steering wheel in the opposite direction 
to return to the correct trajectory.
Fixed, accompanied by an onscreen 
message.
The system has a fault.
Stay alert and drive carefully, then carry out (3).
Active Lane Keeping AssistanceFlashing.
You are about to cross a broken 
lane marking without operating the direction 
indicators.
The system is activated, then corrects the 
trajectory on the side of the detected lane 
marking.
For more information, refer to the Driving 
section.
Fixed, accompanied by the display 
of a message and an audible 
signal.
The system has a fault.
Carry out (3).
Lane positioning assistFixed, accompanied by the 
Service warning lamp.
The system has a fault.
Carry out (3).
AirbagsFixed.
One of the airbags or seat belt 
pyrotechnic pretensioners is faulty.
Carry out (3).
Front passenger airbag (ON)Fixed.
The front passenger airbag is activated.
The control is in the "ON" position.
In this case, do NOT install a "rearward 
facing" child seat on the front passenger seat 
- risk of serious injury!
Front passenger airbag (OFF)Fixed.
The front passenger airbag is deactivated.
The control is set to the “OFF ” position.
A "rearward facing" child seat can be installed, 
unless there is a fault with the airbags (Airbags 
warning lamp on).
Under-inflationFixed.
The pressure in one or more tyres is too 
low.
Check the pressure of the tyres as soon as 
possible.
Reinitialise the detection system after adjusting 
the pressure.
Under-inflation warning lamp 
flashing then fixed and Service 
warning lamp fixed.
The tyre pressure monitoring system is faulty.
Under-inflation detection is no longer monitored.   

16
Instruments
Black/white warning lamps
Automatic gearbox or Electric automatic 
gearbox (e-EAT8) (Rechargeable hybrid)
Fixed.
The automatic gearbox is locked.
You must press the Unlock button to unlock it.
eSave function (Rechargeable hybrid)Fixed, accompanied by the reserved 
electric range.
The eSave function is activated.
Indicators
Service indicator
The servicing information is expressed in terms 
of distance (miles or kilometres) and time 
(months or days).
The alert is given at whichever of these two 
terms is reached first.
The servicing information is displayed in the 
instrument panel. Depending on the version of 
the vehicle:
–  The distance recorder display line indicates 
the distance remaining before the next service 
is due, or the distance travelled since it was due 
preceded by the "-" sign.
–  An alert message indicates the distance 
remaining, as well as the period before the next 
service is due or how long it is overdue.
Check the tyre pressures as soon as possible 
and carry out (3).
Stop & StartFixed, accompanied by the display of a 
message.
The Stop & Start system has been deactivated 
manually.
The engine will not switch off at the next traffic 
stop.
Fixed.
The Stop & Start system has been 
deactivated automatically.
The engine will not switch off at the next traffic 
stop, if the exterior temperature is:
–
 
below 0°C.
–
 
above +35°C.
For more information, refer to the 
Driving 
section.
Flashing then fixed, accompanied by a 
message.
The system has a fault.
Carry out (3).
Rear foglampsFixed.
The lamps are on.
Green warning/indicator lamps
Blind spot monitoring
Fixed.
The function has been activated.
Hill Assist Descent ControlFixed.
The function has been activated, but the 
conditions for regulation are not met (gradient, 
gear engaged).
Flashing.
The function is regulating the speed of 
the vehicle.
The vehicle is being braked; the brake lamps 
come on during the descent.
Stop & StartFixed.
When the vehicle stops, the Stop & Start 
puts the engine into STOP mode.
Flashing temporarily.
STOP mode is momentarily unavailable 
or START mode is automatically triggered.
For more information, refer to the Driving 
section.
Vehicle ready to drive (Rechargeable 
hybrid)
Fixed, accompanied by an audible signal 
when it comes on.
The vehicle is ready to drive.
The indicator lamp goes out upon reaching a 
speed of approximately 3 mph (5
  km/h) and 
lights up again when the vehicle stops moving.
The lamp will go out when you turn off the 
engine and exit the vehicle.
Lane positioning assistFixed.
The function has been activated. All conditions have been met: the system is 
operating.
For more information, refer to the Driving 
section.
Automatic wipingFixed.
Automatic windscreen wiping is activated.
Direction indicatorsFlashing with audible signal.
The direction indicators are on.
SidelampsFixed.
The lamps are on.
Dipped beam headlampsFixed.
The lamps are on.
Automatic headlamp dippingFixed.
The function has been activated 
via the touch screen (Driving/Vehicle menu).
The lighting control stalk is in the "AUTO" 
position.
For more information, refer to the Lighting and 
visibility  section.
Blue warning/indicator lamps
Main beam headlamps
Fixed.
The lamps are on.   

17
Instruments
1Black/white warning lamps
Automatic gearbox or Electric automatic 
gearbox (e-EAT8) (Rechargeable hybrid)
Fixed.
The automatic gearbox is locked.
You must press the Unlock button to unlock it.
eSave function (Rechargeable hybrid)Fixed, accompanied by the reserved 
electric range.
The
 
eSave function is activated.
Indicators
Service indicator
The servicing information is expressed in terms 
of distance (miles or kilometres) and time 
(months or days).
The alert is given at whichever of these two 
terms is reached first.
The servicing information is displayed in the 
instrument panel. Depending on the version of 
the vehicle:
–
 
The distance recorder display line indicates 
the distance remaining before the next service 
is due, or the distance travelled since it was due 
preceded by the "-" sign.
–
 
An alert message indicates the distance 
remaining, as well as the period before the next 
service is due or how long it is overdue.
The value indicated is calculated  according to the distance covered and 
the time elapsed since the last service.
The alert may also be triggered close to a 
due date.
Service spannerOn temporarily when the ignition is 
switched on.
Between 620 and 1,860 miles (1,000 and 3,000 
km) remain before the next service is due.
Fixed, when the ignition is switched on.
The next service is due in less than 620 
miles (1,000 km).
Have your vehicle serviced very soon.
Service spanner flashingFlashing then fixed, when the 
ignition is switched on.
(With
 
BlueHDi   Diesel engines, associated with 
the Service warning lamp.)
The servicing interval has been exceeded.
Have your vehicle serviced as soon as possible.
Resetting the service indicator
The service indicator must be reset after each 
service.
If you have serviced your vehicle yourself:
►
 
Switch off the ignition.
 
 
 
 
► Press and hold the button located on the end 
of the wiper control stalk.
►
 
Switch on the ignition; a temporary display 
window appears and a countdown begins.
►
 
When the display indicates =0, release the 
button; the spanner disappears.
If you have to disconnect the battery 
following this operation, lock the vehicle 
and wait at least 5 minutes for the reset to be 
registered.
Reminder of the servicing information
You can access the servicing information at any 
time.
  
► Press the trip distance recorder reset button.
The servicing   information   is displayed for a few 
seconds, then disappears.
Engine oil level indicator
(Depending on version)   

18
Instruments
 
► Press this button to temporarily display the 
driving range.
Actions required related to a lack of  AdBlue®
The following warning lamps light up when the 
quantity  of AdBlue® is below the reserve level: 
driving range of 1,500 miles (2,400 km).
Together with the warning lamps, messages 
regularly remind you of the need to top up to 
avoid engine starting being prevented. Refer to 
the Warning and indicator lamps  section for 
details of the messages displayed.
For more information on  AdBlue® 
(BlueHDi) and in particular on topping 
up, refer to the corresponding section.
Warning/indicator 
lamps on Action Remaining 
range
 
 
Top up. Between 1,500 miles 
and 500 
miles (2,400 
km and 800 
km)
On versions fitted with an electric gauge, the 
engine oil level status is displayed on the 
instrument panel for a few seconds when 
the ignition is switched on, after the servicing 
information, in the form of messages.
The level read will only be correct if the vehicle is on level ground and the engine 
has been off for more than 30 minutes.
Low oil level
This is indicated by the message " Oil 
level incorrect" on the instrument panel, 
accompanied by the lighting of the Service 
warning lamp and an audible signal.
If a low oil level is confirmed by a check using 
the dipstick, the level must be topped up to avoid 
damage to the engine.
For more information on  Checking levels, refer 
to the corresponding section.
Oil gauge malfunction
This is indicated by the message " Oil level 
measurement invalid" on the instrument panel.
Consult a PEUGEOT dealer or a qualified 
workshop.
In the event of a malfunction of the 
electric gauge, the oil level is no longer 
monitored.
If the system is faulty, you must check the 
engine oil level using the manual dipstick 
located in the engine compartment.
For more information on  Checking levels, 
refer to the corresponding section.
Coolant temperature 
indicator
 
 
With the engine running:
–  In zone  A, the temperature is correct.
–
 
In zone 
 B, the temperature is too high. 
The associated warning lamp and the 
STOP
  warning   lamp light up in red on the 
instrument panel, accompanied by the display of 
a message and an audible signal.
You must stop the vehicle as soon as it is 
safe to do so.
Wait a few minutes before switching off the 
engine.
After switching off the ignition, carefully  open the bonnet and check the coolant 
level.
For more information on  Checking 
levels, refer to the corresponding 
section.
AdBlue® range indicators 
(BlueHDi)
The Diesel BlueHDi engines are equipped with 
a system that associates the SCR (Selective 
Catalytic Reduction) emissions control system 
and the Diesel particle filter (DPF) for the 
treatment of exhaust gases. They cannot 
function  without AdBlue
® fluid.
When the level of AdBlue® falls below the 
reserve level (between 1,500 and 0 miles (2,400 
and 0
 
km)), a warning lamp lights up when 
the ignition is switched on and an estimate 
of the distance that can be travelled before 
engine starting is prevented is displayed in the 
instrument panel.
The engine starting prevention system  required by regulations is activated 
automatically once the AdBlue
® tank is empty. 
It is then no longer possible to start the 
engine until the minimum level of AdBlue
® has 
been topped up.
Manual display of driving range
While the driving range is greater than 
1,500 miles (2,400   km), it is not displayed 
automatically.
    

20
Instruments
Manual test on the 
instrument panel
This function allows you, at any time, to check 
certain indicators and to display the alerts log.
  
► With the engine running, briefly press this 
button.
The following information is displayed on the 
instrument panel:
–  Engine oil level.
–  Next service due.
–  Driving range associated with the  AdBlue
® and 
the SCR system (BlueHDi Diesel).
–  Current alerts.
This information is also displayed 
automatically every time the ignition is 
switched on.
Distance recorders
With the ignition on, the distances are 
permanently indicated. They are deactivated 
about 30 seconds after switching the ignition 
off. They are displayed when the driver's door 
is opened, and when the vehicle is locked or 
unlocked.
When travelling abroad, you may have to 
change the distance units (km or miles): 
While driving, the message is displayed every 30 
seconds. The alert is repeated when switching 
on the ignition.
You can continue driving for up to 685 miles 
(1,100
  km) before the engine starting 
prevention system is triggered.
Have it checked by a PEUGEOT dealer 
or a qualified workshop.
Starting prevented
Every time the ignition is switched on, the 
message "Emissions control   fault: Starting 
prevented" is displayed.
To restart the engine
Contact a PEUGEOT dealer or a 
qualified workshop.
Power indicator 
(Rechargeable hybrid)
The power indicator shows in real time the power 
demanded from the vehicle.
There are 3 zones: 
 
 
POWER High power demand, using the  combined capabilities of the petrol 
engine and the electric motor(s) 
(depending on version).
The slider is located in this zone 
during more dynamic driving phases 
when high levels of performance are 
being demanded.
ECO Optimal use of energy (internal  combustion or electric).
The slider is located in this zone 
when driving under electric power 
and when optimal use is being made 
of the petrol engine, both accessible 
by adopting a suitable driving style.
A symbol indicates the threshold at 
which the petrol engine will restart. 
The driver can therefore moderate 
their acceleration to remain in electric 
driving mode.
CHARGE Energy recovery for partly recharging the traction battery.
The slider is located in this zone 
during deceleration: taking your foot 
off the accelerator pedal or braking.
Partial recharging of the battery by 
energy recovery has no effect on the 
charge level indicator.
Charge level indicator 
(Rechargeable hybrid)
 
 
The charge level of the traction battery and 
the remaining range in electric driving mode 
are permanently displayed when the vehicle is 
switched on.
The range displayed depends on the use  of the vehicle (type of driving and speed), 
the outside temperature and the activated 
comfort equipment.