2022 NISSAN PATHFINDER width

[x] Cancel search: width

Page 273 of 647

NISSAN PATHFINDER 2022  Owner´s Manual •The distance guide line and the ve-
hicle width line should be used as a
reference only when the vehicle is on
a level paved surface. The distance
viewed on the monitor is for refer-
ence only and

Page 274 of 647

NISSAN PATHFINDER 2022  Owner´s Manual Vehicle width guide linesO4
Indicate the vehicle width when backing
up.
Predicted course lines
O5
Indicate the predicted course when back-
ing up. The predicted course lines will be
displayed on the m

Page 276 of 647

NISSAN PATHFINDER 2022  Owner´s Manual 1. Visually check that the parking space issafe before parking your vehicle.
2. The rear view of the vehicle is displayed on the screen
OAwhen the shif t lever is
moved to the R (Reverse) position. 3.

Page 281 of 647

NISSAN PATHFINDER 2022  Owner´s Manual When the camera is first activated with the
bird’s-eye view in the display, a red icon (if so
equipped) will flash on the screen. This in-
dicates that the sonar system is activated.
For additional

Page 282 of 647

NISSAN PATHFINDER 2022  Owner´s Manual Vehicle width guide linesO5
Indicate the approximate vehicle width
when backing up.
Predicted course lines
O6
Indicate the predicted course when oper-
ating the vehicle. The predicted course
lines wil

Page 284 of 647

NISSAN PATHFINDER 2022  Owner´s Manual Front-side view
Guiding lines
Guiding lines that indicate the approximate
width and the front end of the vehicle are
displayed on the monitor.
The front-of-vehicle line
O1shows the front
part of the v

Page 285 of 647

NISSAN PATHFINDER 2022  Owner´s Manual The front-wide view will not be displayed
when the vehicle speed is above 6 MPH
(10 km/h).
NOTE:
• When the monitor displays the front-wideview and the steering wheel turns about
90 degrees or less

Page 287 of 647

NISSAN PATHFINDER 2022  Owner´s Manual 1. Visually check that the parking space issafe before parking your vehicle.
2. The rear view of the vehicle is displayed on the screen
OAwhen the shif t lever is
moved to the R (Reverse) position. 3.
Page:   1-8 9-16 17-24 next >