#
Scan the displa yed QR code with the
Mercedes me app or any QR code scanner on
a mobile device. If the Mercedes me app is
not yetinstalled on your mobile device, you
will be directed tothe store of your mobile
device. #
Follow the directions in the app.
The vehicle is connected with your Mercedes
me user account. This automatically creates
yo ur user pro/le in theve hicle.
If only your user pro/le is available, it will be
loaded automaticall y.
If more than one user pro/le is available, you
will be directed tothe user selection.
When theve hicle is stationar y,the set-up
assistant starts automatically aTer user selec-
tion.
Selecting user op Selecting user op tions
tions #
Select Settings. #
Select Suggestions. #
Select Allow all suggestions .
or #
Switch the options on or o. individuall y.
If an option is swit ched on and su1cient data
has been gathered, suggestions based on your
user behaviour will be o.ered toyou. #
F
For int
or int ellig
elligent multimodality
ent multimodality: :select Multimo-
dality.
If th e option is active, the MBUX Voice Assis-
ta nt can be activated in cer tain situations. #
T To switc
o switc h t
h the lear
he lear ning function
ning function o.
o.f
for 24 h:
or 24 h:
switch on Deactiv. intelligent learning for
24h. #
T
To delet
o delet e cumulat
e cumulat ed sugg
ed sugges
estions:tions: select
Reset suggestion history and con/rmJa(Yes).
Pr ot
Pr otecting
ecting user
user-speci/c
-speci/c cont
content and applications
ent and applications
If yo u add a new user, access pr otection is
already activated forth e user pro/le. The
Mercedes me PIN and, depending on theve hicle
equipment, biometric senso rsare available for
access. Biometric senso rsmust be taught in in
th eve hicle. The authentication process then takes
all taught-in and available senso rsinto account.
The following user-speci/c content and applica-
tions are pr otected, forex ample:
R User selection and user pro/le settings R
Biometric senso rs
The teaching-in of biometric sensors is protec-
te d.
R Sugge stions
The da taand de term ination of the most prob-
able navigation destinations, media sources,
ra dio stations, contacts and messages are
pr otected.
R ENERGIZING COACH
The recorded health data and their evaluation
are pr otected.
R Mercedes me connect store
The pur chase of services is pr otected. #
Switch Protect content on or o.. #
Switch Access protection on or o..
% When access pr otection is switched o., your
user pro/le can be accessed and changed
from every vehicle seat.
% Access pr otection is switched on or o. on a
ve hicle-speci/c basis. MBUX multimedia system
321 321
T
T
eac
eac hing in, editing and dele
hing in, editing and dele ting biome
ting biometr
tric data
ic data
The biometric data models are sa ved in the sen-
sors in theve hicle. If recognition has been taught-
in, this sensor ser ves as a cont ributory factor for
authentication on the multimedia system. #
Select Protect content .#
Select Facial recognition, Fingerprint recogni-
tion orVoice recognition.
% If necessar y,authenticate yourself on the mul-
timedia system.
A
A ut
ut henticating using f
henticating using f ace r
ace recognition
ecognition #
Close the driver's door or fasten the driver's
seat belt. #
Look at the driver display for about /ve sec-
onds.
Yo ur face is scanned. A message in the driver
display sho wswhe ther facial recognition was
successful or not. You can unlock your user
pro/le and pr otected applications with the
fa cial scan. A A
ut
ut henticating using
henticating using /ng
/nger
erpr
pr ints
ints #
Place and liT your /n gerseveral times on the
/ngerprint sensor under theto uchscreen
(/ page 302).
The /n geris scanned. If the scanning proce-
dure is successful, a message appears on the
cent ral displa y.Yo u can unlock your user pro-
/le and pro tected applications with your /n ger
print.
A
A ut
ut henticating using v
henticating using v oice r
oice recognition
ecognition #
Speak the sentence shown on the central dis-
play and follow theVo ice Assistant's inst ruc-
tions.
If th evo ice recognition was successful, a mes-
sage appears on the central displa y.Yo u can
unlock your user pro/le.
% Avoid backg round or disturbing noises during
vo ice recognition.
Dele Dele ting biome
ting biome tr
tric data
ic data #
Tap on E ,fo rex ample, behind Facial rec-
ognition. #
Select Yes. T
T
eac
eac hing in t
hing in t he v
he vehicle ke
ehicle key f
y f or
or pr
pro/le
o/le selection
selection #
Select Protect content . #
Select Key recognition. #
Have theke yre ady and follow the set-up
assistant's prom pts.
The user pro/le is lin kedto the selected key.If
yo u open theve hicle with theke y,the light,
mir ror and seat settings foryo ur user pro/le
are pre-activated. The keyyo u are cur rently
using for unlocking is used.
The key is only storedforth e driver and for
one user pro/le.
Selecting a user
Selecting a user
% When you call up your driver pro/le, the driv-
er's seat and the steering wheel can be set.
Yo u can cancel the setting process with the
fo llowing actions:
R Press Tap here to cancel. messageonthe
cent ral displa y.
R Press one of the seat operating buttons in
th e driver's door. #
Select Change user. 322 322
MBUX multimedia system
Using map functions
Using map functions
Multimedia system:
4 © 5
Navigation
Incr
Incr easing map scale
easing map scale #
When the map is shown, tap twice quickly with
one /n geronthe central displa y.
or #
Movetwo /n gers apart on the central displa y.
Decr
Decr easing map scale
easing map scale #
Tap with two /ngers on the central displa y.
or #
Movetwo /n gers toget her on the central dis-
pla y.
Mo
Mo ving t
ving t he map
he map #
When the map is displa yed, swipe in any direc-
tion with one /nger on the central displa y. #
T
To r
o r ese
ese t t
t the map t
he map t o t
o the curr
he curr ent v
ent vehicle posi-
ehicle posi-
tion:
tion: select \Centre . Selecting map or
Selecting map or
ient
ientation
ation #
Tapre peatedly on theÄ compass symbol
on the map.
The map orientations changes in this order:
R The 2D map view is displa yed so that nor th
is alw ays at theto p.
R The 2D map view is aligned tothe direc-
tion of tr avel.
R The 3D map view is aligned tothe direc-
tion of tr avel.
R The map sho ws the comple teroute. Using ser
Using ser
vices
vices R
R
eq
eq uir
uir ements:
ements:
R There is an Internet connection.
R Mercedes me connect is available.
R You ha veset up a user account in the
Mercedes me Portal.
R The vehicle is connected toa user account
and you ha veaccep tedth e conditions of use
fo rth e service. Fu
rther information can be found at: https://
www.mercedes.me
R The service is available and has been activa-
te d.
Multimedia system: 4 ©
Sho
Sho wing
wing tr
tra1c
a1c inf
infor
ormation
mation #
Select Zinthe navigation module
(/ page 328). #
Select View. #
Activate Traffic . #
Activate Traffic incidents andFree-flowing
traffic.
Tr a1c incidents, forex ample roadwor ks, local
area reports (e.g. fog) and warning message s,
are shown on thero ute.
The tra1c delay is displa yedfo rth e cur rent
ro ute. The smallest value forth e display for
tra1c dela ysis a minute.
Displa Displa ying hazar
ying hazar d w
d war
arnings
nings
If hazard warnings are available these can be
shown as symbols on the map. The display MBUX multimedia system
333
333
Multimedia system:
4 © 5
Apps 5
Dashcam #
If se veral USB devices are connected with the
multimedia system, select a USB device
(/ page 335).
If no USB device is selected, a selection is
made automatically when recording starts. #
T To select a r
o select a r ecor
ecording mode:
ding mode: selectLoop
recording orIndividual recording.
Loop recording records se veral short video
/les. When the memory is full, recording is
continued automatical ly. In doing so, other
/les will be overwritten starting with the oldest
/le.
Individual recording stopsrecording when the
memory limit is reached. An individual record-
ing is automatical lyprotected against being
ove rwritten. #
T To st
o st art
art::select Start recording.
The length of there cording is shown. The
Please do not remove the storage medium.
message appears. The video /le is stored on
th e USB device. #
T To end:
o end: selectEnd recording . %
In some countries, geo-coordinates (longitude
and latitude) are shown in the video image.
Fo rte ch nical reasons, thege o-coordinates
may show greater inaccuracies.
A report may appear in thefo llowing cases:
R Individual recording :th e memory is full or
th ere are only a fewminutes recording time
av ailable. The video recording stops or will be
stopped imminently.
Change the USB device or dele tea video /le.
R The camera is not functional, theCamera
unavailable message appears.
Ha ve the camera checked in a Mercedes-Benz
service centre.
R Ifth e country border indication has been
switched on.
R If an outdoor recording is star ted with the
camera app during a dashcam recording, the
dashcam recording pauses and resumes auto-
matical lyaTer the camera recording is /n-
ished. A noti/cation tothis e.ect is displa yed. T T
elephone
elephone T
T
elephony
elephony N
No
ot
tes on t
es on t elephony
elephony &
W
WARNING
ARNING Risk of dist raction from operat-
ing integ rated communication equipment
while theve hicle is in motion
If yo u operate communication equipment inte-
gr ated in theve hicle when driving, you could
be distracted from the tra1c situation. This
could also cause youto lose control of the
ve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and tra1c conditions and operate the
equipment with theve hicle stationar y.336
336
MBUX multimedia system
&
W
WARNI NG
ARNI NGRisk of accident from operating
mobile communication equipment while
th eve hicle is in motion
Mobile communication devices distract the
driver from the tra1c situation. This can also
cause the driver tolose control of theve hicle. #
As a driver, only operate mobile commu-
nication devices when theve hicle is sta-
tionar y. #
As a vehicle occupant, use mobile com-
munication devices only in the designa-
te d area, e.g. in there ar passen ger com-
partment. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating mobile communication equipment in
th eve hicle. &
W WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around and hit
vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cannot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe additional information on st owing
mobile communications devices cor rectl y:
R Loading theve hicle (/ page 144)
Blu et
Bluet ooth
oo th® ®
connection:
connection: The menu view and
theav ailable functions in the
te lephone menu are in part dependent on the
Blue tooth ®
pro/le of the connected mobile
phone. If the mobile phone supports all thefo l-
lowing Blue tooth ®
pro/les, the full range of fea-
tures is available:
R PBAP (Phone Book Access Pro/le)
- The contacts on the mobile phone are
shown automatically on the multimedia
system.
R MAP (Message Access Pro/le)
- The mobile phone message functions can
be used on the multimedia system.
R HFP (hands-free pro/le)
- Wireless telephony is available on the mul-
timedia system.
R SAP (SIM Access Pro/le)
- The car telephone has access tothe SIM
card data and dials into the mobile phone
network via theex terior aerial.
Ir re specti veofthis, Blue tooth ®
audio functionality
can byused with any mobile radio unit. MBUX multimedia system
337 337
#
Remo vethe /re extinguisher from the st owage
compartment. #
ATer removing the /re extinguisher, close the
co ver again. Flat tyre
Flat tyre
N
No
ot
tes on
es on 0at
0attyr
tyres
es &
W
WARNING
ARNING Risk of accident due toa 0at
tyre
A 0at tyre se verely a.ects the driving charac-
te ristics as well as the steering and braking of
th eve hicle.
T
T yr
yr es wit
es wit hout
houtr
run-0at
un-0at c
char
har act
acter
eristics:
istics: #
Do not drive with a 0at tyre. #
Change the 0at tyre immediately with an
emer gency spa rewheel or spare wheel.
Alternativel y,consult a quali/ed special-
ist workshop.
T
T yr
yr es wit
es wit h
hr
run-0at
un-0at c
char
har act
acter
eris
istics:
tics: #
Obser vethe information and warning
no tes on MOExtended tyres (run-0at
tyres). In
theev ent of a 0at tyre, thefo llowing options are
av ailable depending on your vehicle's equipment:
R V
Vehicles wit
ehicles with MOExt h MOExtended tyr
ended tyr es:
es:it is possible
to continue the journey for a short period of
time. Make sure you obser vethe no tes on
MOExtended tyres (run-0at tyres)
(/ page 377).
R V Vehicles wit
ehicles wit h a TIREFIT kit:
h a TIREFIT kit: you can repair the
tyre so that it is possible tocontinue the jour-
ney for a short period of time. Todo this, use
th e TIREFIT kit (/ page 378).
R V
Vehicles wit
ehicles wit h Mer
h Mercedes me connect:
cedes me connect: you can
make a call for breakdown assistance via the
ove rhead control panel in the case of a break-
down (/ page 340).
R All v
All v ehicles:
ehicles: change the wheel (/ page 406). N
No
ot
tes on MOExt
es on MOExt ended tyr
ended tyres
es(r
(run-0at
un-0at tyr
tyres)
es) &
W
WARNING
ARNING Risk of accident when driving in
limp-home mode
Driving in emer gency mode impairs the han-
dling characteristics of theve hicle. #
Do not exceed the permissible maximum
speed of the MOExtended tyres. #
Avoid any abrupt steering and driving
manoeuvres as well as driving over
obstacles (kerbs, pot holes, o.-road).
This applies, in particular, toa loaded
ve hicle. #
Stop driving in the emer gency mode if
yo u notice:
R banging noise
R vehicle vib ration
R smoke which smells like rubber
R continuous ESP ®
inter vention
R crac ksinthe tyre side walls #
ATer driving in emer gency mode, ha ve
th erims checkedby a quali/ed specialist Breakdown assis
tance
377 377
R
The vehicle is on solid, non-slippery and le vel
gr ound.
R The requ ired tyre-change tool kit is available.
% Ifyo ur vehicle is not equipped with the tyre-
ch ange tool kit, consult a quali/ed specialist
wo rkshop to/nd out about sui table tools. #
Apply the electric parking brake manuall y.#
Movethe front wheels tothe straight-ahead
position. #
ShiT the transmission toposition j. #
V
Vehicles wit
ehicles wit h lev
h level contr
el contr ol syst
ol system:
em:setthe nor-
mal vehicle le vel (/ page 266). #
Switch o. theve hicle. #
Make sure that theve hicle cann otbe star ted. #
Place choc ks orother suitable items under the
front and rear of the wheel that is diagonal ly
opposite the wheel you wish tochange. #
Remo vethe hub cap if necessary
(/ page 407). #
Raise theve hicle (/ page 407). R
R
emo
emo ving and
ving and /tting
/ttingt
the wheel tr
he wheel tr im/hub caps
im/hub caps R
R
eq
eq uir
uir ements:
ements:
R The vehicle is prepared for a wheel change
(/ page 406).
Aluminium hub cap
Aluminium hub cap #
T
To r
o r emov
emov e:
e:position soc ket2 from the tyre-
ch ange tool kit on hub cap 1. #
Position wheel spanner 3on soc ket2. #
Using wheel spanner 3, turn hub cap1
anti-clockwise and remo veit. #
T
To
o /t:
/t: follow the inst ructions abo veinreve rse
order. %
Speci/ed
Speci/ed tight
tightening t
ening t orq
orque:ue: 25 Nm. R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel R
R
eq
eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 406).
R The hub caps ha vebeen remo ved
( / page 407).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel
is being changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Wheels and tyres
407 407
%
Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of thefo llowing engine oils once onl y.
Engine oils for one-time /lling only in exceptional
cases:
R Mer Mer cedes-Ma
cedes-Ma ybac
ybach S 450:
h S 450: MB-Freigabe or
MB-Appr oval 229.31 or ACEA C3
R Mer
Mer cedes-Ma
cedes-Ma ybac
ybach S 580; Mer
h S 580; Mer cedes-May-
cedes-M ay-
bac
bac h S 680:
h S 680: MB-Freigabe or MB-Appr oval
229.51 or ACEA C3
The following values referto an oil change, includ-
ing the oil /lter.
Engine oil
Engine oil /lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
Mercedes-Maybach S
450 8.0 l
Mercedes-Maybach S
580 8.5 litres
Mercedes-Maybach S
680 10.0 litres N No
ot
tes on br
es on br ak
ake
e0uid
0uid No
tethe inst ructions about operating 0uids
(/ page 417). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 417). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antifre eze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection. 422
422
Te
ch nical data