-
Weather conditions
- Stone chippings and dirt
- Chemical cleaning agents
- Oily products
R Do not use polish on matt decorative foil. Po l-
ishing will ha vethe e.ect of shining thefo il-
wrapped sur face.
R Do not treat matt or st ructured decorative
fo ils with wax.Pe rm anent stains may occur.
Scratches, cor rosive deposits, areas a.ected by
cor rosion and damage caused byincor rect care
cannot alw ays be comple tely re paired. In this
case, contact a quali/ed specialist workshop.
Yo u can obtain more information on care and
cleaning agents from the manufacturer.
In the case of foil-wrapped sur faces, optical di.er-
ences may occur between the sur faces that we re
not pro tected bya decorative foil aTer removing a
decorative foil.
% Have workor repairs todecorative foils car-
ri ed out at a quali/ed specialist workshop
(e.g. in a Mercedes-Benz Se rvice Centre). N
No
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. #
Always switch o. the windscreen wipers
and theve hicle before cleaning the wind-
screen or wiper blades. &
W
WARNING
ARNING Risk of burns from theta ilpipe
and tailpipe trims
The exhaust tailpipe and tailpipe trims can
become very hot. If you come into contact
with these parts of theve hicle, you could burn
yo urself. #
Always be particular lycareful around the
ta ilpipe and theta ilpipe trims and super-
vise children especially closely in this
area. #
Allow vehicle parts tocool down before
to uching them. To
avo id damage totheve hicle, obser vethe no tes
on cleaning and care of thefo llowing car parts:
Wheels and r
Wheels and r ims
ims
R Use water and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few minu tes
aTer cleaning before parking it. The brake
disks and brakepads warm up and dry out.
W W indo ws
indo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom-
mended for Mercedes-Benz.
R Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws. Maintenance and ca
re
339
339
of
the donor batter y,then POSITIVE contact
2 and the positive term inal of the donor bat-
te ry. Begin each time with the contacts on
yo ur ow nve hicle /rst. #
ATer removing the jump lead/charging cable,
close co ver1 of POSITIVE contact 2.
Plug-in h
Plug-in h ybr
ybr id:
id:ifyo ur vehicle has been star ted
with starting assis tance, it may not be possible to
use the electric drive for appr oximately 30
minutes.
Fu rther information can be obtained at a quali/ed
specialist workshop. R R
eplacing t
eplacing t he 12 V batt
he 12 V batt ery
ery #
Obser vethe no tes on the 12 V battery
(/ page 350).
Mercedes-Benz recommends that you ha vethe
12 V battery replaced at a quali/ed specialist
wo rkshop, e.g. at a Mercedes-Benz Se rvice
Centre. Obser
vethefo llowing no tes if youwa nttoreplace
th e battery yourself:
R Alwaysre place a faulty battery with a battery
which meets the speci/c vehicle requ ire-
ments.
The vehicle is equipped with an AGMtech nol-
ogy bat tery (Absorbent Glass Mat) or a lith-
ium-ion batter y.Fu llve hicle functionality is
only guaranteed with an AGM bat tery or lith-
ium-ion batter y.Fo r saf etyre asons, Mercedes-
Benz recommends that you only use batteries
which ha vebeen tested and appro vedfo ryo ur
ve hicle byMercedes-Benz.
R Carryove r de tach able parts, such as vent
hoses, elbow /ttings or term inal co vers from
th e battery being replaced.
R Make sure that theve nt hose is alw ays con-
nected tothe original opening on the side of
th e batter y.
Fi t any existing or supplied cell caps.
Otherwise, gases or battery acid could
escape.
R Make sure that de tach able parts are recon-
nected in the same way. T T
o
o w
w -st
-st ar
arting or to
ting or towing away
wing away P
P
er
er mitt
mitt edto
ed towing met
wing met hods (non plug-in h
hods (non plug-in h ybr
ybrid)
id) *
N
NOOTE
TE Damage from automatic braking If one of
thefo llowing functions is activated,
th eve hicle brakes automatically in cer tain sit-
uations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avo id damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
During towing. #
In a car wash. Mercedes-Benz
recommends transporting your
ve hicle in the case of a breakdown, rather than
to wing it away.
Fo rto wing, use a tow rope or tow bar with bo th
axles on thegr ound. Do not use tow bar systems. Breakdown assis
tance
355
355
R
thev Towing not permitted See Owner's
Manual display message appears
Ex
Ex cep
cep tion:
tion: ifth eve hicle is located in a danger
zone, it can be reco vered from the danger zone
despite the display message or the display not
wo rking.
It must not be towe d fur ther than 50 m with bo th
axles on thegr ound. A towing speed of 10 km/h
must not be exceeded. Be yond these limits, only
transporting is permitted. T
T
o
o wing t
wing t he v
he vehicle wit
ehicle wit h bot
h both axles on t
h axles on t hegr
he ground
ound #
Obser vethe no tes on the permitted towing
me thods. #
Make sure that the battery is connected and
ch arge d.
Obser vethefo llowing points when the battery is
dischar ged:
R The vehicle cann otbe star ted.
R the electric parking brake cannot be released
or applied R
V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: the
transmission cannot be shiTed toposition i
or j.
% V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: ifthe
transmission cannot be shiTed toposition i
or if the display does not show anything,
transport theve hicle (/ page 358). A towing
ve hicle with liTing equipment is requ ired for
ve hicle transpo rtation.
* NO
NOTE
TEDamage due to towing away at
ex cessively high speeds or over long dis-
ta nces The driv
etra in could be damaged when towing
at excessively high speeds or over long distan-
ces. #
Atowing speed of 50 km/h must not be
ex ceeded. #
Atowing dis tance of 50 km must not be
ex ceeded. &
W
WARNING
ARNING Risk of accident when towing a
ve hicle which is too heavy
If th eve hicle tobe tow- star ted or towe daway
is heavier than the permissible gross mass of
yo ur vehicle, thefo llowing situations can
occur:
R theto wing eye may become de tach ed.
R theve hicle/trailer combination may
swer veorove rturn. #
Before tow- starting or towing away,
ch eck if theve hicle tobe tow- star ted or
to we dawa yex ceeds the permissible
gr oss mass. If a
vehicle must be tow- star ted or towe dawa y,its
permissible gross mass must not exceed the per-
missible gross mass of theto wing vehicle. #
Information on the permissible gross mass of
th eve hicle can be found on theve hicle identi-
/cation plate (/ page 385). #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: do not
open the driver's door or front passenger Breakdown assistance
357
357
door;
the transmission otherwise automati-
cally shiTs toposition j. #
Fitth eto wing eye (/ page 360). #
Fasten theto wing device.
* N
NOOTE
TE Damage due toincor rect connec-
tion of theto w bar #
Only connect theto w rope or tow bar to
th eto wing eyes. #
Deactivate the automatic locking mechanism
(/ page 86). #
Do not activate the HOLD function. #
Deactivate tow- awa y protection
(/ page 101). #
Deactivate Active Brake Assist (/ page 237).#
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: shiTto
position i. #
Release the electric parking brake. &
W
WARNING
ARNING Risk of accident due tolimited
saf ety-re lated functions during theto wing
process
Saf ety-re lated functions are limited or no lon-
ge rav ailable in thefo llowing situations:
R theve hicle is switched o..
R the brake system or po wer steering system
is malfunctioning.
R the energy supply or the on-board electri-
cal system is malfunctioning.
When your vehicle is towe daw ay, signi/cantly
more e.ort may be requ ired tosteer and
brake than is normally requ ired. #
Use a tow bar. #
Make sure that the steering wheel can
mo vefreely be fore towing theve hicle
awa y. *
N
NO
O TE
TE Damage due toexcessive tractive
po wer If
yo u pull away sharpl y,the tractive po wer
may be too high and theve hicles could be
damaged. #
Pull away slo wlyand smoo thly. Loading t
Loading t
he v
he v ehicle f
ehicle f or tr
or transport
anspo rt Hybr
Hybr
id v
id vehicles:
ehicles: transpor tation of vehicles should
only be car ried out byprofessional reco very com-
panies. #
Obser vethe no tes on towing away
( / page 357). #
Connect theto wing device totheto wing eye
in order toload theve hicle.
% You can also attach theto w bar tothe trailer
hitch. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: shiTthe
automatic transmission toposition i. 358
358
Breakdown assistance
%
V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: the
automatic transmission may be loc ked in posi-
tion jintheev ent of damage tothe electri-
cal system. ToshiT toi , pr ovide the on-
board electrical system with po wer
( / page 354). #
Load theve hicle onto the transpor ter. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: shiTthe
automatic transmission toposition j. #
Use the electric parking brake tosecure the
ve hicle against rolling away. #
Only secure theve hicle bythe wheels.
V
V ehicles wit
ehicles wit h ADS PL
h ADS PLUS (A
US (Adap
daptiv
tive Dam
e Dam ping Sy
ping Sy s-
s-
t
t em PL
em PL US)
US) &
W
WARNING
ARNING Risk of an accident when trans-
porting vehicles with Adaptive Damping
System PLUS
When transpo rting vehicles with Adaptive
Damping System PLUS, theve hicle/trailer
combination may begin torock and start to
skid. #
Load theve hicle cor rectly onto the
transpor ter. #
Secure theve hicle on all four wheels
with suitable tensioning straps. #
Do not exceed the maximum permissible
speed of 60 km/h when transporting. *
N
NOOTE
TE Damage totheve hicle from secur-
ing it inco rrectly #
ATer loading, theve hicle must be
secured on all four wheels. Otherwise,
th eve hicle could be damaged. #
A minimum dis tance of 20 cm upwards
and 10 cm down wards must be kept to
th e transport platform. #
Secure theve hicle on all four wheels aTer
loading. 4MA
4MA
TIC v
TIC v ehicles/v
ehicles/v ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ans-
ans-
mission
mission #
Make sure that the front and rear axles come
to rest on the same transpor tation vehicle.
* N
NOOTE
TE Damage tothe drive train due to
incor rect positioning of theve hicle #
Do not position theve hicle abo vethe
connection point of the transport vehi-
cle. Breakdown assis
tance
359
359
1
Jack
2 Ratchet for jack
3 Wheel wrench
4 Folding chock
5 Centring pin
6 Socket wrench forra tchet Pr
Pr
epar
epar ing t
ing the v
he vehicle f
ehicle f or a wheel c
or a wheel c hange
hange R R
eq eq uir
uir ements:
ements:
R The vehicle is not on a slope.
R The vehicle is on solid, non-slippery and le vel
gr ound.
R The requ ired tyre-change tool kit is available.
% Ifyo ur vehicle is not equipped with the tyre-
ch ange tool kit, consult a quali/ed specialist
wo rkshop to/nd out about sui table tools. #
Apply the electric parking brake manuall y. #
Movethe front wheels tothe straight-ahead
position. #
ShiT the transmission toposition j. #
V
V ehicles wit
ehicles wit h lev
h level contr
el contr ol syst
ol system:
em:setthe nor-
mal vehicle le vel (/ page 246). #
Switch o. theve hicle. #
Make sure that theve hicle cann otbe star ted. #
Place choc ks orother suitable items under the
front and rear of the wheel that is diagonal ly
opposite the wheel you wish tochange. #
If necessar y,remo vethe wheel trim/hub caps
(/ page 374). #
Raise theve hicle (/ page 375). R
R
emo
emo ving and
ving and /tting
/ttingt
the wheel tr
he wheel tr im/hub caps
im/hub caps R
R
eq
eq uir
uir ements:
ements:
R The vehicle is prepared for a wheel change
(/ page 374).
Plas
Plas tic hub cap
tic hub cap #
T
To r
o r emov
emov e:
e:turn the centre co ver of the hub
cap anti-clockwise and remo vethe hub cap. #
T
To
o /t:
/t: make sure that the centre co ver of the
hub cap is turned anti-clockwise. #
Position the hub cap and turn the centre co ver
clockwise until the hub cap engages ph ysically
and audibl y. 374
374
Wheels and tyres
R
Do not start theve hicle and do not release the
electric parking brake.
R Do not open or close any doors or theta ilgate. #
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe
scr ews comple tely. Po
sition of the jack support points
* N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of injury from incor rect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of th
e jack must be positioned vertically
under the jacking point of theve hicle. *
N
NOOTE
TE Damage totheve hicle due tothe
jack If
yo u do not position the jack at the jack sup-
port points pr ovided forth is purpose, you
could damage your vehicle. #
Only position the jack at the jack sup-
port points pr ovided forth is purpose. #
Take thera tchet out of the tyre-change tool kit
and place it on the he xagon nut of the jack so
th at the letters "AUF" are visible. 376
376
Wheels and tyres
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Auxiliary battery malfunc-
tion (white display message) *T
he auxiliary battery forth e automatic transmission is no longer being charge d. #
Consult a quali/ed specialist workshop. #
Until then, alw ays select park position jmanually before you switch o. theve hicle. #
Before leaving theve hicle, apply the electric parking brake.
Auxiliary battery malfunc-
tion (red display message) *T
he auxiliary battery forth e transmission is no longer being charge d. #
Consult a quali/ed specialist workshop. #
Until then, alw ays select park position jmanually before you switch o. theve hicle. #
Before leaving theve hicle, apply the electric parking brake. Br Br
ak
ak es
es Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
!
Parking brake See Owner's
Manual *T
heyellow ! indicator lamp is lit. The electric parking brake is malfunctioning.
T
T o apply o apply :
: #
Switch theve hicle o. and switch it back on #
App lythe electric parking brake manually (/ page 211).
If it is not possible toapply the electric parking brake: #
Consult a quali/ed specialist workshop. 434
434
Displ
aymessages and warning/indicator lamps