2022 MERCEDES-BENZ EQC SUV parking brake

Cross
Tra1c Ale rtcan warndrivers of any cross-
ing tra1c when reve rsing and manoeuvring out of
a parking space. The radar sensors in the bumper
also monitor the area adjacent totheve hicle. If a
critical situation is de tected, theL symbol
appears in the media display and theve hicle can
be braked automaticall y.
If th era dar sensors are obstructed byvehicles or
ot her objects, de tection is not possible.
Cross Tra1c Ale rtis active under thefo llowing
conditions:
R ifth eve hicle is reve rsing at a walking pace.
R manoeuvring assistance is activated
(/ page 241).
% Also obser vethe inst ructions on Blind Spot
Assist and Active Blind Spot Assist
(/ page 220).
Syst
Syst em limits
em limits
Cross Tra1c Ale rtis not available on inclines.
Cross Tra1c Ale rtis not available when driving
with a trailer. A
A ctiv
ctiv ating/deactiv
ating/deactiv ating manoeuvr
ating manoeuvr ing assist
ing assistant
ant
Multimedia system:
4 © 5
Settings 5
Assistance
5 Camera & parking #
Activate/deactivate Manoeuvring assistance.
% Manoeuvring assistant must be acti veforthe
function of Drive AwayAssist (/ page 240)
and Cross Tra1c Ale rt (/ page 240). T
T
r
railer hitch
ailer hitch N
No
ot
tes on tr
es on tr ailer oper
ailer oper ation
ation *
N
NOOTE
TE The operating permit may be in vali-
dated due tothe illegal installation of
trailer hitches The installation – including
retro/tting – of a
non- folding or non-remo vable trailer hitch that
eve n partial lyconceals the license plate or the
lighting system is prohibited. #
Obser vethe applicable legal regulations
fo rth e installation of trailer hitches. Obser
vethefo llowing no tes on theto ngue weight:
R Do not use a tongue weight that exceeds or
fa lls below the permissible tongue weight
R Use a tongue weight as close as possible to
th e maximum tongue weight
Do not exceed thefo llowing values:
R Perm issible towing capacity
R Perm issible rear axle load of theto wing vehi-
cle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Maximum permissible speed of the trailer
Ensure thefo llowing before starting a journe y:
R The tyre pressure on there ar axle of theto w-
ing vehicle is set for a maximum load
R The lighting of the connected trailer is opera-
tional
R V
V ehicles wit
ehicles wit hout LED headlam
hout LED headlam ps or MUL
ps or MULTI-
TI-
BEAM LED headlam
BEAM LED headlam ps:
ps:the headlamps ha ve
been set cor rectly Driving and parking
241
241

R
Drive Away Assist
R Cross Tra1c Ale rt
R Reversing camera
R 360° camera
Coupling up a tr
Coupling up a tr ailer
ailer
* NO
NOTE
TEDamage tothe star ter battery due
to full dis charge Charging
the trailer battery using the po wer
supply of the trailer can damage the star ter
batter y. #
Do not use theve hicle's po wer supply to
ch arge the trailer batter y. #
Remo vethe co ver cap from the ball head and
store it in a safe place. #
Position the trailer on a le vel sur face behind
th eve hicle and couple it up totheve hicle. #
Open the soc ket cap. #
Inse rtthe plug with lug 1ingroo ve 3 on
th e soc ket. #
Turn bayonet coupling 2totheright as far as
it will go. #
Let the cap engage. #
Secure the cable tothe trailer with cable ties
(only if you are using an adap ter cable). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. Under
thefo llowing conditions, a message may
appear on the inst rument display even if the
trailer has been connec ted cor rectl y:
R LEDs ha vebeen ins talled in the trailer lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA).
% Accessories can be connected tothe perma-
nent po wer supply up to180 W and tothe
po we r supply that is switched on via the igni-
tion loc k.
U
U ncoupling a tr
ncoupling a tr ailer
ailer &
W
WARNI NG
ARNI NGRisk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between theve hicle and the
trailer dr awbar. #
Do not uncouple trailers with an engaged
ove rrun brake. Driving and parking
245 245

*
N
NO
OTE
TE Damage during uncoupling with an
engaged overrun brake The
vehicle may be damaged if you uncouple
with an engaged overrun brake. #
Do not uncouple trailers with an engaged
ove rrun brake. &
W
WARNING
ARNING Risk of becoming trapped when
disconnecting the trailer cable
V
V ehicles wit
ehicles wit h r
h rear axle lev
ear axle lev el contr
el control:
ol:The vehi-
cle may lo wer when the trailer cable is discon-
nected.
This could result in you or other people
becoming trapped if parts of your or their
body are between theve hicle body and the
tyres or underneath theve hicle. #
Make sure nobody is underneath the
ve hicle or in the immediate vicinity of the
wheel ar ches when you disconnect the
trailer cable. &
W WARNING
ARNING Risk of becoming trapped when
disconnecting the trailer cable
V
V ehicles wit
ehicles wit h lev
h level contr
el contr ol syst
ol system:
em:Thevehicle
may lo wer when the trailer cable is disconnec-
te d.
This could result in you or other people
becoming trapped if your or their limbs are
between theve hicle body and the tyres or
underneath theve hicle. #
Make sure that nobody is underneath the
ve hicle or in the immediate vicinity of the
wheel ar ches when you disconnect the
trailer cable. *
N
NOOTE
TE Damage tothere ar bumper from
ins talling adap ter cables or adap ter plugs The
following parts could be damaged when
swiveling the ball neck fully electricall y:
R Bumper
R Adapter cable
R Adapter plug #
Alwaysre mo vethe adap ter cable or
adap ter plug before swiveling the ball
neck fully electricall y. #
Secure the trailer against rolling away. #
Disconnect the electrical connection between
th eve hicle and the trailer. #
Uncouple the trailer. #
Place the co ver cap on the ball head.
% T
Tr
railer
ailer s wit
s wit h LED lighting:
h LED lighting: aTer uncoupling the
traile r,switch theve hicle on and then o.
again. Bicy
Bicy
cle r
cle r ac
ack function
k function &
W WARNING ARNING Risk of an accident if the bicy-
cle rack is used incor rectly
The bicycle rack may become de tach ed from
th eve hicle in thefo llowing cases:
R the permissible load capacity of the trailer
hitch is exceeded. 246
246
Driving and parking

The on-board computer is ope
rated using the leT-
hand Touch Control and the leT-hand back/home
button.
When the on-board computer is being operated,
di.erent acoustic signals will sound as operating
fe edbac k,e.g. when the end of a list is reached.
The following menus are available:
R Service
R Assistance
R Trip
R Navigation
R Radio
R Media
R Telephone
R HUD
R Design
% You can /nd information about the possible
settings and selections on the menus in the
Digital Owner's Manual.
The menus can be called up from the menu bar
on the inst rument displa y. #
T To call up t
o call up t he menu bar:
he menu bar: pressthe leT-hand
back button until the menu bar is displa yed.
% Press theò button tocall up the menu bar
of the on-board computer. #
T
To scr
o scr oll in t
oll in t he menu bar
he menu bar :
:swipe tothe leT or
ri ght on the leT-hand Touch Control. #
T
To call up a menu, submenu or possible se
o call up a menu, submenu or possible se t-
t-
tings on t
tings on t he menu, or
he menu, or con/rm
con/rma selection or
a selection or
se
se tting:
tting: press the leT-hand Touch Control. #
T
To scr
o scr oll t
oll thr
hrough display
ough display s or lis
s or lists on tts on the
he
menu, or select displa
menu, or select displa y cont
y content, a function,
ent, a function,
an entr
an entr y or a display
y or a display :
:swipe upwards or down-
wa rds on the leT-hand Touch Control. #
T
To e
o e xit a submenu:
xit a submenu: pressthe leT-hand back
button. Ov
Ov
er
ervie
vie w of display
w of display s on t
s on the ins
he instr trument display
ument display
Displa yson the inst rument displa y:
ë Active Parking Assist (/ page 237)
é Parking Assist PARKTRONIC deactivated
(/ page 235) h
Cruise control (/ page 200)
È Limiter (/ page 200)
ç Active Distance Assist DISTRONIC
(/ page 203)
ê Active Brake Assist (/ page 216)
à Active Steering Assist (/ page 209)
à Active Lane Keeping Assist (/ page 223)
õ Operational readiness of the drive system
(/ page 154)
° Haptic accelerator pedal (/ page 161)
ò Sound generator inoperative (/ page 371)
ë HOLD function (/ page 196)
_ Adaptive Highbeam Assist Plus
(/ page 131)
ð Maximum permissible speed exceeded (for
cer tain countries only)
V
V ehicles wit
ehicles wit h Speed Limit Assist:
h Speed Limit Assist: detected
instructions and tra1c signs (/ page 216).
V
V ehicles wit
ehicles wit h
hTr
Tra1c
a1c Sign Assist:
Sign Assist: detected instruc-
tions and tra1c signs (/ page 218). Instrument display and on-board computer
253
253

If
th e download of a deep system update is com-
ple teand the downloaded system update is ready
fo r installation, you will be informed of this aTer
th e next ignition cycle, forex ample.
% Park theve hicle safely in a suitable location
before starting the installation.
Re quirements forth e installation:
R The ignition is switched o..
R Notes and warnings ha vebeen read and
accep ted.
R The electric parking brake has been applied.
If all requ irements ha vebeen ful/lled, the down-
loaded system update is installed. The multimedia
system cannot be operated while the downloaded
system update is being installed and vehicle func-
tions are restric ted.
If errors should occur during the installation, the
multimedia system automatically attem ptsto
re store the pr evious version. If restoration of the
pr ev ious version is not possible, a symbol appears
on the media displa y.Consult a quali/ed special-
ist workshop toresol vethe problem. Se
Se
tting up a W
tting up a W i-F
i-Fi ho
i ho tspot
tspot R
R
eq
eq uir
uir ements:
ements:
R T
To se
o se t up t
t up t he W
he Wi-F
i-Fi connection of t
i connection of t he multime-
he multime-
dia sy
dia sy st
stem wit
em wit h e
h ext
xter
er nal ho
nal ho tspo
tspots:
ts:your vehicle
does not ha vea permanent lyinstalled com-
munication module.
R The device tobe connected supports at least
one of the types of connection described.
Multimedia system: 4 © 5
Settings 5
System
5 Wi-Fi & Bluetooth
A
A ctiv
ctiv ating/deactiv
ating/deactiv ating W
ating Wi-Fi
i-Fi #
Select Wi-Fi.
Connecting t
Connecting t he multimedia syst
he multimedia syst em wit
em with an e
h an ext
xter-
er-
nal ho
nal ho tspo
tspot using W
t using W i-Fi
i-Fi
The type of connection established must be selec-
te d on the multimedia system and on the device
to be connected.
% The connection procedure may di.er depend-
ing on the device. Follow the inst ructions that
are shown in the displa y.Fu rther information can be
found in the manufacturer's operating
inst ructions. #
Select Internet settings . #
Select Connect via Wi-Fi . #
Select Add hotspot.
Connecting using a QR code
Connecting using a QR code #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using QR code. #
Scan the displa yed QR code with the device to
be connected.
The Wi-Fi connection is established.
Connecting using a secur Connecting using a secur itykey
ity key #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using security key. #
Have the security key displa yed on the device
to be connected (see the manufacturer's oper-
ating inst ructions). #
Enter this security key on the multimedia sys-
te m. 266
266
MBUX multimedia system

Apps
for Smartphone Integ ration
R Apple CarPlay ®
R Android Auto
% For saf etyre asons, the /rst activation of
Smartphone Integ ration on the multimedia
system must be car ried out when theve hicle
is stationary and the parking brake is applied.
Yo u can start Apple CarPlay ®
or Android Auto
from the device manager.
% Mercedes-Benz recommends disconnecting
th e connecting cable only when theve hicle is
stationar y.
Ov
Ov er
ervie
vie w of tr
w of tr ansf
ansferr
erred v
ed v ehicle data
ehicle data
When using Smartphone Integ ration, cer tain vehi-
cle data is transfer redto the mobile phone. This
enables youto get the best out of selected mobile
phone services. Vehicle data is not directly acces-
sible.
The following system information is transmitted:
R SoTware release of the multimedia system
R System ID (anonymised) The transfer of
this data is used tooptimise com-
munication between theve hicle and the mobile
phone.
To do this, and toassign se veralve hicles tothe
mobile phone, a vehicle identi/er is random lyge n-
erated.
This has no connection totheve hicle identi/ca-
tion number (VIN) and is dele ted when the multi-
media system is reset (/ page 268).
The following driving status data is transmitted:
R Transmission position engaged
R Distinction between par ked, standstill, rolling
and driving
R Day/night mode of the inst rument display
R Drive type
The transfer of this data is used toalter how con-
te nt is displa yedto cor respond tothe driving sit-
uation.
The following position data is transmitted:
R Coordinates
R Speed
R Compass direction R
Acceleration direction
This data is used bythe mobile phone toimpr ove
th e accuracy of the navigation (e.g. for continua-
tion in a tunnel). Mer
Mer cedes-Benz emerg cedes-Benz emerg ency call syst
ency call system
em Inf
Inf
or
ormation on t
mation on t he Mer
he Mercedes-Benz emerg
cedes-Benz emerg ency
ency
call syst
call syst em
em The Mercedes-Benz emer
gency call system only
functions in areas where mobile phone co verage
is available from there leva nt cont ract partne r.
Insu1cient network co verage from there leva nt
cont ract partner may result in an emer gency call
not being transmitted.
The vehicle must be switched on before an auto-
matic emer gency call can be made.
% The Mercedes-Benz eme rgency call system is
activated at thefa ctor y.Using the Mercedes-
Benz emer gency call system is free of charge. MBUX multimedia system
291 291

*
N
N O
OTE
TE Damage from automatic braking If one of
thefo llowing functions is activated,
th eve hicle brakes automatically in cer tain sit-
uations:
R Active Brake Assist
R Active Distance Assist DISTRONIC
R HOLD function
R Active Parking Assist
To avo id damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
During towing. #
In a car wash. *
N
NO OTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. #
Ensu rethere is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o..
R The 360° Camera or there ve rsing camera is
switched o..
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation and heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise theta ilgate could
open unintentionall y.
R For car washes with a con veyor system: -
Neutral iis engaged.
- Ifyo uwo uld like tolea vetheve hicle while
it is being washed, make sure theke y is
located in theve hicle. The park position
j isotherwise automatically engaged.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W
WARNING
ARNING Risk of an accident when using
high-pressure cleaners with round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. Maintenance and ca
re
309 309

N
N
o
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. #
Always switch o. the windscreen wipers
and the drive system before cleaning the
windscreen or wiper blades. To
avo id damage totheve hicle, obser vethe no tes
on cleaning and care of thefo llowing car parts:
Wheels and r
Wheels and r ims
ims
R Use water and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few minu tes
aTer cleaning before parking it. The brake
disks and brakepads warm up and dry out. W
W indo ws
indo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom-
mended for Mercedes-Benz.
R Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws.
% ATer changing the wiper blades or treating
th eve hicle with wax, clean the windscreen
th oroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure toobser vethe
application instructions may result in damage,
smear mar ksor dazzling spots.
% Remo veextern al fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving saf ety
systems may be impaired or not available
(/ page 191).
W
W iper blades
iper blades
R Movethe wiper arms into there placement
position (/ page 136).
R With th e wiper arms folded out, clean the
wiper blades with a damp clo th.%
Make sure that the wiper blades are coated.
The coating can lea veresidues on a clo th. Do
not rubth e wiper blades excessively or clean
th em too oTen.
Ext
Ext er
erior lighting
ior lighting
R Clean the lenses with a wet sponge and mild
cleaning agent (e.g. car sha mpoo).
R Only use cleaning agents or cleaning clo ths
th at are suitable for plastic lenses.
V
V ehicle soc ke
ehicle soc ket (high-v
t (high-v olt
oltag
age batt
e batt er
ery)
y)
R Use clean water and a soT clo thtoclean the
ve hicle soc ket.
R Do not use high-pressure cleaners or cleaning
agents such as soap.
Sensors
Sensors
R Clean the sensors in the front and rear bump-
ers with a soT clo thand car shampoo
(/ page 191).
R When using a high-pressure cleaner, main tain
a minimum distance of 30 cm. 312 312
Maintenance and care