2022 MERCEDES-BENZ E-CLASS SALOON reset

Connecting and using ano
ther device with the
diagnostics connection can ha vethefo llowing
e.ects:
R Malfunctions in theve hicle system
R Perm anent damage tovehicle components
Please referto thewa rranty term s and conditions
fo rth is matter. Moreo
ver,connecting equipment tothe diagnos-
tics connection can lead toemissions monitoring
information being reset, forex ample. This may
lead totheve hicle failing tomeet there qu ire-
ments of the next emissions inspection during the
main inspection. Quali/ed
Quali/ed
specialis
specialist w
t work
ork shop
shop
A qu ali/ed specialist workshop has the necessary
special skills, tools and quali/cations tocor rectly
car ryout any necessary workon your vehicle.
This particular lyapplies tosaf ety-re leva nt wo rk.
Alw ays ha vethefo llowing workcar ried out on
yo ur vehicle at a quali/ed specialist workshop:
R Safety-re leva nt wo rk
R Service and maintenance work
R Repair work
R Modi/cations as well as installations and con-
ve rsions
R Workon electronic components R
V
V ehicles wit
ehicles wit h 48 V on-boar
h 48 V on-boar d electr
d electrical syst
ical syst em:
em:
wo rkon the high-voltage component of the 48
V on-board electrical system
R Plug-in h
Plug-in h ybr
ybrid:
id:workon thehy brid system
Mercedes‑Benz recommends a Mercedes‑Benz
service cent re. V
V
ehicle r
ehicle r egis
egistrtration
ation
Mercedes-Benz may ask its service centres to
car ryout tech nical inspections on cer tain vehi-
cles. The quality or saf ety of theve hicle is
impr oved as a result of the inspection.
Mercedes-Benz can only inform you about vehicle
ch ecks if Mercedes-Benz has your registration
data.
It is possible that your vehicle has not yet been
re gistered in your name in thefo llowing cases:
R ifyo ur vehicle was not pur chased at an author-
ised specialist deale r.
R ifyo ur vehicle has not yetbeen examined at a
Mercedes-Benz service cent re.38 38
General no
tes

and manu
facturers or third parties, suc has break-
down services. The same is true in the case of
wa rranty claims and quality assurance measures.
In general, there adout is per form ed via the legally
prescribed port forth e diagnostics connection in
th eve hicle. The operational data that are read out
document tech nical states of theve hicle or of
individual components and assist in the diagnosis
of malfunctions, compliance with warranty obli ga-
tions and quality impr ovement. Tothat end, these
data, in particular information about component
loads, tech nical events, malfunctions and other
fa ults may be transmitted along with theve hicle
identi/cation number tothe manufacturer. Fur-
th ermore, the manufacturer is subject toproduct
liability. Forth is reason the manufacturer also
uses operational data from theve hicle, fore xa m-
ple, forre calls. These data can also be used to
ex amine the customer's warranty and guarantee
claims.
Fa ult memories in theve hicle can be reset by a
service outl etor at your requ est as part of repair
or maintenance work. Conv
Conv enience and inf ot
enience and inf otainment functions ainment functions
Yo u can store con venience settings and individual
settings in theve hicle and change or reset them
at any time.
Depending on theve hicle equipment, this
includes thefo llowing settings, fore xamp le:
R seat and steering wheel positions
R suspension and climate control settings
R individual settings, suchas interior lighting
Depending on the selected equipment, you can
import data into vehicle inf otainment functions
yo urself.
Depending on theve hicle equipment, this
includes thefo llowing data, fore xamp le:
R multimedia data, suc has music, /lms or pho-
to sfo r playback in an integ rated multimedia
system
R address book data for use in connection with
an integ rated hands-free system or an integ ra-
te d navigation system
R entered navigation destinations
R data about the use of Internet services These data
for con venience and inf otainment
functions may be sa ved locally in theve hicle or
th ey may be located on a device which you ha ve
connected totheve hicle, suc has a smartphone,
USB 0ash drive or MP3 pla yer.Ifyo u ha veentered
th ese data yourself, you can dele tethem at any
time.
This data is transmitted from theve hicle tothird
parties only at your requ est. This applies, in par-
ticular, when you use online services in accord-
ance with the settings that you ha veselected.
Smar
Smar tphone int tphone int egr
egration (e.g. Andr
ation (e.g. Andr oid A
oid Aut
uto or
o or
Apple CarPlay
Apple CarPlay ®
®
)
)
If yo ur vehicle is accordingly equipped, you can
connect your smartphone or ano ther mobile end
device totheve hicle. You can then control them
by means of the control elements integ rated in
th eve hicle. Images and audio from the smart-
phone can be output via the multimedia system.
Cer tain information is simultaneously transfer red
to your smartphone. Depending on the type and
integ ration, thisincludes position data, day/night
mode and other general vehicle statuses. For
more information please consult the Owner's
Manual of theve hicle/inf otainment system. 42
42
Gene
ral no tes

1
Toclose
2 Toopen
The buttons on the driver's door take precedence. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:presstheW
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:press or pull
th eW button again. When
theve hicle is switched o., you can con-
tinue tooperate the side windo ws.
This function is available for around four minutes
or until a front door is opened.
A A ut ut omatic rev
omatic rever
ersing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting.
The reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
W button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The side windo wswill be closed as far as theve n-
tilation position. Opening and closing
95
95

1
Raise
2 Open
3 Close/lo wer
Use the3 button tooperate the panorama
sliding sunroof and thero ller sunblind.
The panorama sliding sunroof can be operated
only when thero ller sunblind is open. #
Check whe ther the sliding sunroof can be
ra ised or opened when a roof luggage rack is
/t ted. #
T To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:pressthe3
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation: brie0y press
th e3 button in any direction.
The opening/closing process will be stopped.
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he sliding sun-
he sliding sun-
r
r oof
oof
If an obstacle obstructs the sliding sunroof during
th e closing process, the sliding sunroof will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there ve rsing function being active
In particular, there ve rsing function does not
re act:
R tosoT, light and thin objects, e.g. /n gers.
R towa rdsth e end of the closing procedure.
R during resetting. #
During the closing process, make sure
th at no body parts are in the closing
area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during automatic operation.
The closing process will be stopped. A A
ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he r
he roller sunblind
oller sunblind
If an obstacle obstructs thero ller sunblind during
th e closing process, thero ller sunblind will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. Opening and closing
99
99

R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the sliding sunr
he sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped or
fata l injuries when the sliding sunroof is
closed again
If th e sliding sunroof is closed again immedi-
ately aTer it has been bloc ked or reset, it will
close with increased forc e. #
Make sure that no parts of the body are
in the closing area. #
Release the button immediately if some-
body becomes trapped.
or #
Brie0y press the button in any direction
during the automatic closing process.
The closing process will be stopped. The sliding sunr
The sliding sunr
oof canno
oof cannot be closed and y
t be closed and y ou can-
ou can-
no
no t see t
t see t he cause.
he cause.
% The term "sliding sunroof" also refers to the
panorama sliding sunroof.
If th e sliding sunroof is obstructed during closing
and reopens again slightl y: #
Immediately aTer automatic reve rsing, pull
and hold the3 button down again tothe
point of resis tance until the sliding sunroof is
closed.
The sliding sunroof will be closed with
increased forc e.
If th e sliding sunroof is obstructed again and
opens again slightl y: #
Repeat the pr evious step.
The sliding sunroof will be closed again with
increased forc e.
V V ehicles wit
ehicles wit hout a panor
hout a panor ama sliding sunr
ama sliding sunr oof: t
oof: the
he
sliding sunr
sliding sunr oof is no
oof is not oper
t oper ating smoot
ating smoot hly
hly.
. #
Reset the sliding sunroof.
R
R ese
ese tting t
tting t he sliding sunr
he sliding sunr oof
oof #
Push the3 button up tothe point of resist-
ance repeatedly until the sliding sunroof is
fully open. #
Press the3 button for ano ther second. #
Close the sliding sunroof. V
V
ehicles wit
ehicles wit h a panor
h a panorama sliding sunr
ama sliding sunr oof: t
oof: t he slid-
he slid-
ing sunr
ing sunr oof or t
oof or t he r
he roller sunblind is no
oller sunblind is no t oper
t operating
ating
smoot
smoot hly
hly.
. #
Reset the sliding sunroof and thero ller sun-
blind.
R
R ese
ese tting t
tting t he sliding sunr
he sliding sunr oof and t
oof and t he r
he r oller sun-
oller sun-
blind
blind #
Pull and hold the3 button little bylittle
until the sliding sunroof is fully closed. #
Pull and hold the3 button little bylittle
until thero ller sunblind is fully closed. #
Use automatic operation tofully open and
th en close the sliding sunroof. R
R
oller sunblinds
oller sunblinds Ext
Ext
ending t
ending t he r
he rear side windo
ear side windo w r
w roller sunblinds
oller sunblinds *
N
NOOTE
TE Damage tothe inertia reel due toit
snapping back If suddenly snapped bac
k, the inertia reel may
be damaged. Opening and closing
101
101

The steering wheel and
the driver's seat will mo ve
back tothe last driving position in thefo llowing
cases:
R You switch the po wer supply or theve hicle on
when the driver's door is closed
R You close the driver's door when theve hicle is
switched on.
The last driving position will be sa ved when:
R You switch o. theve hicle.
R V
V ehicles wit ehicles wit h memor
h memory function:
y function: you call up the
seat settings via the memory function.
R V
V ehicles wit
ehicles wit h memor
h memory function:
y function: you sa vethe
seat settings via the memory function.
V
V ehicles wit
ehicles wit h memor
h memory function:
y function: press one of the
memory function position switches tostop the
adjustment process. Se
Se
tting t
tting t he easy entr
he easy entr y and e
y and e xit f
xit f eatu re
eature Multimedia system:
4 © 5
Settings 5
Vehicle
5 Automatic seat adjustment
5 Easy Entry/Exit #
Activate or deactivate the function. Memor
Memor
y function
y function F
F
unction of t
unction of t he memor
he memory function
y function &
W
WARNING
ARNING Risk of an accident if the mem-
ory function is used while driving
If yo u use the memory function on the driver's
side while driving, you could lose control of
th eve hicle as a result of the adjustments
being made. #
Only use the memory function on the
driver's side when theve hicle is station-
ar y. &
W
WARNI NG
ARNI NGRisk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
yo u and other vehicle occupants – particular ly
ch ildren – could become trapped. #
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat. #
If someone becomes trapped, press a
preset position button or seat adjust-
ment switch immediatel y. &
W WARNI NG
ARNI NGRisk of entrapment if the mem-
ory function is activated bychildren
Children could become trapped if they acti-
va te the memory function, particular lywhen
unat tended. #
Never lea vechildren unattended in the
ve hicle. 120
120
Seats and st
owing

#
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. Yo
u can use the memory function when theve hi-
cle is switched o..
Seat adjustments for up tothre e people can be
stored and called up using the memory function.
Yo u can sa vesettings forth efo llowing systems:
R Seat, backrest and head restraint
R Steering wheel
R Outside mir rors
R Head-up display Oper Oper
ating t
ating t he memor
he memor y function
y function S S
t tor
or ing
ing #
Set the desired position for all systems. #
Brie0y press theV memory button and
th en press preset position button 4,T
or U within thre e seconds.
An acoustic signal sounds. The settings are
stored. #
T To call up:
o call up: press or brie0y hold preset position
button 4,TorU.
ATer releasing the button, all systems are
mo ved into the stored position. S
S
t
to
o w
w ag
ag e ar
e ar eas
eas N
No
ot
tes on loading t
es on loading t he v
he vehicle
ehicle &
D
DAN
AN GER
GER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if the boot
lid is open when the engine is running, espe-
cially if theve hicle is in motion. #
Always switch o. the engine before
opening the boot lid. #
Never drive with the boot lid open. &
W
WARNING
ARNING Risk of injury from unsecured
items in theve hicle
If objects, lug gage or loads are not secured or
not secured su1cient ly,they could slip, tip Seats and st
owing
121
121

Ext
Ext
er
erior lighting
ior lighting N
No
ot
tes on adjus
es on adjus ting t
ting the lights when dr
he lights when dr iving abr
iving abroad
oad V
V
ehicles wit
ehicles wit h st
h static LED headlam
atic LED headlamps: ps:it is not nec-
essary tocon vert the headlamps. The legal
re qu irements are also met in countries in which
tra1c drives on theot her side of thero ad.
V
V ehicles wit
ehicles wit h Int
h Intellig
elligent Light Syst
ent Light Syst em:
em:before
crossing the border into countries in which tra1c
drives on theot her side of thero ad, it is neces-
sary toset the headlamps tosymmetrical low
beam (/ page 145).
Once the headlamps ha vebeen con verted:
R Oncoming tra1c will not be dazzled.
R The edge of thero ad will not be illuminated as
fa r or as high.
R The "mo torw ay mode" and "enhanced fog
light" functions will not be available.
The headlamps must be reset toasymmetrical low
beam when youre turn from abroad. Inf
Inf
or
ormation about lighting syst
mation about lighting syst ems and y
ems and your
our
r
r esponsibility
esponsibility The
various lighting systems of theve hicle are
only aids. The driver of theve hicle is responsible
fo r cor rect vehicle illumination in accordance with
th e pr evailing light and visibility conditions, legal
re qu irements and tra1c situation. Light switch
Light switch
Oper
Oper
ating t
ating t he light switch
he light switch 1
W LeT-hand parking lights
2 X Right-hand parking lights
3 T Standing lights and licence plate light-
ing
4 Ã Automatic driving lights (prefer red light
switch position) Light and sight
137
137