2022 MERCEDES-BENZ E-CLASS SALOON engine

*
N
N O
OTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters other
th an those which meet the speci/cations
necessary forth e prescribed service
inter vals. #
Do not alter the engine oil or oil /lter in
order toachie velonger change inter vals
th an prescribed. #
Do not use additives. #
Have the engine oil changed aTer the
prescribed inter vals. Mercedes-Benz
recommends having the oil
ch anged at a quali/ed specialist workshop.
Only use engine oils appr ovedfo ryo ur vehicle by
Mercedes-Benz.
P P e
etr
tr ol engines:
ol engines: for cer tain countries, di.erent
engine oils can be used in conjunction with
re duced maintenance inter vals. Further informa-
tion on di.erent engine oils can be obtained at a
qu ali/ed specialist workshop.
Quality and capacity of engine oil Quality and capacity of engine oil
No No t f
t for plug-in h
or plug-in h ybr
ybrid:
id:
Engine oil
Engine oil speci/cations
speci/cations (pe
(petr
trol engines)
ol engines) P
P
e
etr
tr ol engines
ol engines MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Appr ov
Approv al
al
All models 229.51, 229.52,
229.61, 229.71,
229.72 1)
1) recommended for lo west possible fuel consu mption (lo westSA E
viscosity class in each case; obser vepossible restrictions of the
appro vedSA E viscosity classes) Engine oil Engine oil
speci/cations
speci/cations (diesel engines)
(diesel engines) Diesel engines
Diesel engines
MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Approv
Approv al
al
E 400 d 4MATIC 229.52, 229.611)
All other model s2 29.52, 229.61,
229.71, 229.72 1)
1) recommended for lo west possible fuel consu mption (lo westSA E
viscosity class in each case; obser vepossible restrictions of the
appro vedSA E viscosity classes) To
achie vethe lo west possible fuel consum ption,
it is recommended touse the engine oil speci/ca-
tions mar ked in theta ble forth e lo westSA E vis-
cosity class. Obser veany possible restrictions of
th e appr ovedSA E viscosity classes.
% Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of thefo llowing engine oils once onl y.
V
V ehicles wit
ehicles wit h a pe
h a petr
trol engine:
ol engine: MB-Freigabe or
MB-Appr oval 229.31 or ACEA C3
V
V ehicles wit
ehicles wit h a diesel engine:
h a diesel engine:
R E 400 d 4MA
E 400 d 4MA TIC:
TIC:MB-F reigabe or MB-
Appr oval 229.51 or ACEA C3 Te
ch nical data
405
405

R
Allot
All other models:
her models: ACEA C3
No
No t f
t for plug-in h
or plug-in h ybr
ybrid:
id:
Engine oil
Engine oil /lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
E 200 d6 .3 litres
E 200 4MATIC 6.0 litres
E 220 d
E 220 d 4MATIC 6.0
l or 6.3 l
E 300 d 4M ATIC 6.5 litres
E 400 d 4MATIC 7.5 litres
E 450 4MATIC 8.5 litres
All other model s6 .6 litresThe speci/e
d/lling capacity refers to an oil
ch ange with the oil /lter. Engine oil Engine oil
speci/cation
speci/cation (plug-in h
(plug-in hybr
ybrid)
id) Model
Model
MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Appr ov
Approv al
al
E 300 e 1)
E 300 e 4MATIC 1) 229.5
2)
E 300 de
E 300 de 4MATIC 229.52
1) Only use SAE 0W-40 or SAE 5W-40 viscosity class engine oils.
2) recommended for lo west possible fuel consu mption (lo westSA E
viscosity class in each case; obser vepossible restrictions of the
appro vedSA E viscosity classes) To
achie vethe lo west possible fuel consum ption,
it is recommended touse the engine oil speci/ca-
tions mar ked in theta ble forth e lo westSA E vis-
cosity class. Possible restrictions of the appr oved
SA E viscosity classes must be obser ved.
% Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of thefo llowing engine oils once onl y.
V
V ehicles wit ehicles wit h a pe
h a petr
trol engine:
ol engine: MB-Freigabe or
MB-Appr oval 229.31 or ACEA C3 V
V
ehicles wit
ehicles wit h a diesel engine:
h a diesel engine: ACEA C3
Engine oil
Engine oil /lling
/llingcapacity (plug-in h
capacity (plug-in h ybr
ybrid)
id) Model Model
Capacity Capacity
E 300 e6 .7 litres
E 300 e 4MATIC 6.6 litres
All other model s6 .3 litres The speci/e
d/lling capacity refers to an oil
ch ange with the oil /lter. N
No
ot
tes on br
es on br ak
ake
e0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 399). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w, 406
406
Te
ch nical data

va
pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant
Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 399). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N
NO OTE TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the cooling
system is not su1ciently pr otected against
ov erheating and cor rosion at high outside
te mp eratures. #
Only use coolant appr ovedfor
Mercedes-Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the cool-
ing system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antif reeze pr otection
down to-45°C) Te
ch nical data
407
407

N
N
o
ot
tes on windscr
es on windscr een w
een w asher
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 399). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N
NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. V
V
ehicle data
ehicle data V
V
ehicle dimensions
ehicle dimensions The heights speci/ed may
vary as a result of the
fo llowing factors:
R tyres
R load
R condition of the suspension
R optional equipment
N
No ot f
t f or plug-in h
or plug-in h ybr
ybrid:
id:
V
V ehicle dimensions
ehicle dimensions All models
All models
Ve
hicle lengt h4 935 mm
Ve hicle width includ-
ing outside mir rors 2065 mm
Ve hicle width exclud-
ing outside mir rors 1852 mm
Wheelbase2 939 mm408 408
Te
ch nical data

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Key not detected (white dis-
play message) *T
hekey is cur rently unde tected. #
Change the location of theke y in theve hicle. #
Ifth eke y is still not recognised, place it in the slot for starting with theke y (/ page 171).
Á Key not detected (red dis-
play message) *T
hekey cann otbe de tected and may no longer be in theve hicle.
If th eke y is no lon ger in theve hicle and you switch o. theve hicle:
R You can no longer start theve hicle.
R You cannot centrally lock theve hicle. #
Ensu rethat theke y is in theve hicle.
If th eke y is in theve hicle and still not recognised: #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Place theke y in the slot for starting the engine with theke y (/ page 171).
The key battery is weak or dischar ged. #
Check the battery using the indicator lamp (/ page 81). #
Replace theke y batter y,if necessary (/ page 83). Display message
s andwarning/indicator lamps
419
419

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Key being initialised Please
wait *T
hevehicle is processing in order to teach in the new key. #
Wait until processing is comple te.
Place the key in the
marked space See Owner's
Manual *K
eydetection is malfunctioning. #
Change the location of theke y in theve hicle. #
Place theke y in the slot for starting the engine with theke y (/ page 171). Lights Lights
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
:
Left dipped beam (examp le) *T
he cor responding light source is defecti ve. #
Drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.
% LED light sources: the display message forth e cor responding light appears only when all the light-emitting diodes
in the light are faulty. 420
420
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Until then, operate the high beam manuall y.
Hazard warning lamps mal-
functioning *T
he hazard warning lamp switch is malfunctioning. #
Consult a quali/ed specialist workshop. Climat Climat
e contr
e contr ol
ol Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
&
inoperative See Owner's
Man. *T
he stationary heater is temp orarily malfunctioning. #
When theve hicle is stationary on a le vel sur face and the engine has cooled down, make up tofour attem ptsto
switch on the stationary heater, waiting se veral minutes between each attem pt. #
Ifth e stationary heater does not switch on, consult a quali/ed specialist workshop.
&
inoperative Battery low *T
he on-board elect rical system voltage is too lo w.
The stationa ryheater has switched itself o.. #
Drive an extended distance until the battery has reached a su1cient charge leve l again. 424 424
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
&
Pre-entry climate control
(via key) available again
after engine start *Y
ou ha veattem pted toswitch on pre-ent ryclimate cont rol more than twice with theve hicle switched o.. #
Start theve hicle forte n seconds.
Pre-entry clima tecont rol is operational again.
& Pre-entry climate control
(via key) inoperative HV-
battery low *T
hecharge ofthe high-voltage battery is too lo w.Pre-entry clima tecont rol cannot be switched on. #
Char gethe high-voltage battery (/ page 200).
When the high-voltage battery is su1ciently charge d, pre-ent ryclimate cont rolwill be operational again. 426 426
Display messages and
warning/indicator lamps