2022 MERCEDES-BENZ E-CLASS SALOON warning light

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R In poor visibility, e.g. fog, heavy rain or snow
R Ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Light and sight
143 143

W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Intermittent wiping, normal
3 Å Intermittent wiping, frequent 4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wipes with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 348). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 147).
The wiper arms will mo veinto there placement
position.
R R emo emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. Light and sight
147
147

Maint
Maint
enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades. %
The duration until the colour changes varies
depending on the usage conditions. Mirr
Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W WARNING ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. &
W
WARNING
ARNING Risk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. Light and sight
149
149

F
F
olding t
olding t he outside mirr
he outside mirr or
ors in/out
s in/out #
Brie0y press button 1.
R
R ese
ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Brie0y press but ton1. A
A
djus
djusting t ting t he outside mirr
he outside mirr ors
ors #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Press button 2toadjust the position of the
mir ror glass.
Eng
Eng aging t
aging t he outside mirr
he outside mirr ors
ors #
Vehicles without elect rically folding outside
mir rors: manually mo vethe outside mir ror into
th e cor rect position. #
Vehicles with elect rically folding outside mir-
ro rs: press and hold button 1.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. The electrolyte is hazardous
tohealth and cau-
ses ir rita tion. It must not come into contact
with your skin, eyes, respiratory or gans or
clo thing or be swallo wed. #
Ifyo u come into contact with electrolyte,
obser vethefo llowing:
R Immediate lyrinse the electrolyte
from your skin with water and seek
medical attention.
R If electrolyte comes into contact with
yo ur eyes, immediately rinse them
th oroughly with clean water and seek
medical attention.
R Ifth e electrolyte is swallo wed, imme-
diately rinse your mouth out thor-
oughl y.Do not induce vomiting. Seek
medical attention immediatel y.
R Immediately change out of clo thing
which has been contaminated with
electrolyte.
R If an allergic reaction occurs, seek
medical attention immediatel y.150 150
Light and sight

#
Press button 1.
The red or blue indicator lamp on button 1
will light up or go out. S
S
t
tationar
ationar y heat
y heat er/v
er/ventilation
entilation S
S
t
tationar
ationar y heat
y heat er/st
er/stationar
ationar y v
y ventilation function
entilation function
The following functions are per form ed:
R The air inside theve hicle is heated or ventila-
te dto the set temp erature.
R The air inside theve hicle cann otbe cooled
down to temperatures below the outside tem-
perature.
R Ifth e outside temp erature changes, ventilation
mode automatically switches toheating mode
or heating mode automatically switches to
ve ntilation mode.
The stationary hea ter and theex haust gas outl et
are situated at theright-hand front wheel. Switc
Switc
hing t
hing t he st
he stationar
ationar y heat
y heat er/v
er/ventilation
entilation on/o.
on/o.
via t
via t he oper
he oper ating unit
ating unit &
D
DAN
AN GER
GER Risk of fatal injury due topoison-
ous exhaust gases
If th eta ilpipe is bloc ked or su1cient ventila-
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter theve hi-
cle. This is the case in enclosed spaces or if
th eve hicle gets stuck in sno w,forex ample. #
Always switch the stationary heater o. in
enclosed spaces without an air extrac-
tion system, e.g. in garage s. #
Keep theta ilpipe and the area around
th eve hicle free from snow when the
ve hicle or the auxiliary heating is run-
ning. #
Open a door or a roof hatch on the wind-
wa rdside of theve hicle toensure an
adequate supply of fresh air. &
W
WARNING
ARNING Risk of /re due tohot station-
ary heater components and exhaust gases
Flammable materials such as lea ves, grass or
twigs may ignite. #
When the stationary heater is switched
on, make sure that:
R hot vehicle parts do not come into
contact with 0ammable materials.
R theex haust gas can 0ow out of the
stationa ryheater exhaust pipe unhin-
dered.
R theex haust gas does not come into
contact with 0ammable materials. *
N
NOOTE
TE Bat tery dischar gecaused bysta-
tionar y heater or stationaryventilation
ope ration Operating
the stationary heater or stationary
ve ntilation drains the batter y. #
ATer heating or ventilating theve hicle
twice, drive for a longer period of time. Climate control
161
161

Manual disconnection of t
Manual disconnection of t
he high-v
he high-volt
oltag
age on-
e on-
boar
boar d electr
d electr ical syst
ical syst em
em &
D
DAN
AN GER
GER Risk of dea thand /re due to
modi/ed and/or damaged components of
th e high-voltage on-board electrical sys-
tem
The vehicle's high- voltage on-board electrical
system is under high voltage. If you modify
component parts in theve hicle's high- voltage
on-board electrical system or touch damaged
component parts, you may be electrocuted. In
addition, modi/ed and/or damaged compo-
nents may cause a /re.
In theeve nt of an accident or impact tothe
ve hicle underbod y,components of the high-
vo ltage electrical system may be damaged
although the damage is not visible. #
Never make any modi/cations tothe
high- voltage on-board electrical system. #
Do not switch on or use theve hicle if its
high- voltage on-board electrical system
components ha vebeen modi/ed or dam-
aged. #
Neverto uch damaged components of
th e high-voltage on-board electrical sys-
te m. #
ATer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system. #
ATer an accident, ha vetheve hicle trans-
por tedawa y. #
Have the components of the high-voltage
on-board electrical system checked at a
qu ali/ed specialist workshop and
re placed if necessar y. R R
eq
eq uir
uir ements:
ements:
Only disconnect the high-voltage on-board electri-
cal system manually in thefo llowing situations:
R The 6 restraint system warning lamp lights
up in the Instrument Displa y,e.g. aTer an
accident.
R The vehicle is badly damaged, e.g. aTer an
accident, and there straint system co mpo-
nents ha venot been triggered. Oper
Oper ating t
ating t he high-v
he high-v olt
oltag
age disconnect de
e disconnect de vice
vice #
Switch o. theve hicle. #
ShiT the transmission toposition j. #
Apply the electric parking brake. #
Secure theve hicle against rolling away. #
Open the bonnet. Driving and parking
169
169

#
T
To switc
o switc h on t
h on the v
he vehicle:
ehicle: press button 1
twice.
Indicator and warning lamps light up on the
inst rument clus ter.
The vehicle is switched o. again if one of thefo l-
lowing conditions is met:
R you do not start theve hicle within 15 minutes
and the transmission is in position jorthe
electric parking brake is applied.
R you press button 1once. S
S t tar
ar ting t
ting t he v
he vehicle
ehicle S
S
t
tar
ar ting t
ting t he v
he vehicle wit
ehicle wit h t
h the st
he st ar
art/st
t/st op butt
op butt on
on &
D
DAN
AN GER
GER Risk of fatal injuries due to
ex haust gases
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Breathing in
th ese exhaust gases is hazardous tohealth
and results in poisoning. #
Never lea vethe engine and, if present,
th e stationary heater, running in an enclosed space without su1cient
venti-
lation. &
W
WARNI NG
ARNI NGRisk of /re due to0ammable
material in the engine compartment or the
ex haust system
Flammable materials may ignite. #
Therefore, check regula rly th at there are
no 0ammable materials in the engine
compartment or on theex haust system. R
R
eq
eq uir
uir ements:
ements:
R theke y is in theve hicle and is recognised. #
ShiT the transmission toposition jori. #
Depress the brake pedal and press button 1
once. #
Ifth eve hicle does not start: switch o. non-
essential consumers and press but ton1
once. #
Ifth eve hicle still does not start and thePlace
the key in the marked space See Owner's
Manual display message appears on the
inst rument displa y: starttheve hicle with the ke
y in the mar ked space (emer gency ope ra-
tion mode) (/ page 171).
% You can switch o. theve hicle while driving. To
do this, press button 1for about thre e sec-
onds or press button 1thre e times within
th re e seconds. Be sure toobser vethe saf ety
no tes conce rning this under "Driving tips"
(/ page 175).
Obser veany information rega rding display mes-
sages that may be displ ayed on the inst rument
displa y.
S
S t tar
ar ting t
ting t he v
he vehicle wit
ehicle wit h t
h the ke
he key in t
y in t hestow
he st owage
age
com
com par
partment (emerg
tment (emerg ency oper
ency operation mode)
ation mode)
If th eve hicle does not start and thePlace the
key in the marked space See Owner's Manual
message appears in the inst rument displa y,you
can start theve hicle in emer gency ope ration
mode. Driving and parking
171 171

#
Always secure the engine against unin-
te ntional starting before ca rrying out
main tenance or repair work. R
R
eq
eq uir
uir ements:
ements:
R Park position jis selected.
R The anti-theT alarm system is not activated.
R The hazard warning light system is switched
o..
R The bonnet is closed.
R The doors are closed and loc ked.
R The windo wsand sliding sunroof are closed. #
Start theve hicle using the smartphone.
ATer every engine start, the engine runs for
te n minutes.
Yo u can car ryout a maximum of two consecutive
starting attem pts. You must start the engine with
th eke y before trying tostart theve hicle again
with the smartphone.
Yo u can switch o. theve hicle at any time as fol-
lo ws:
R Viath e Smartphone App R
By pressing theÜ orß button on the
key
% Further information can be found in the
smartphone app.
Secur
Secur ing t
ing the v
he vehicle ag
ehicle ag ains
ainst st
t star
arting bef
ting bef or
ore car ry-
e car ry-
ing out maint
ing out maint enance or r
enance or repair w
epair wor
ork:
k: #
Switch on the hazard warning light system.
or #
Unlock the doors.
or #
Open a side window or the sliding sunroof. R
R
unning-in not
unning-in not es
es To
preser vethe engine during the /rst 1,500 km:
R Drive at varying road speeds and engine
speeds.
R Do not drive at speeds greater than
140 km/h.
R Drive theve hicle in drive prog ram A
or ;. R
ShiT tothe next highest gear at theve ry latest
when the needle reaches the last third before
th ere d area in there v counter.
R Do not shiT down manual lyin order tobrake.
R Avoid overstraining theve hicle, e.g. driving at
full thro ttle.
R Do not depress the accelerator pedal past the
pressure point (kickdown).
R Only increase the engine speed gradually and
accelerate theve hicle tofull speed aTer
1,500 km.
This also applies when the engine or parts of the
driv etra in ha vebeen replaced.
Please also obser vethefo llowing running-in
no tes:
R In cer tain driving and driving saf ety sy stems,
th e sensors adjust automatically while a cer-
ta in distance is being driven aTer theve hicle
has been deli vered or aTer repairs. Full sys-
te m e.ectiveness is not reached until the end
of this teach-in process.
R Brakepads, brake disks and tyres that are
either new or ha vebeen replaced only achie ve Driving and parking
173
173