2022 MERCEDES-BENZ E-CLASS COUPE brake

#
T
To r
o r emov
emov e:
e:position soc ket2 from the tyre-
ch ange tool kit on hub cap 1.#
Position wheel spanner 3on soc ket2. #
Using wheel spanner 3, turn hub cap1
anti-clockwise and remo veit. #
T
To
o /t:
/t: follow the inst ructions abo veinreve rse
order.
% Speci/ed
Speci/ed tight
tightening t
ening t orq
orque:ue: 25 Nm. R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheelR
R
eq
eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 351).
R The wheel trims and hub caps ha vebeen
re mo ved (/ page 351).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel is being
changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face. If necessar y,use a lar ge, 0at,
load-bearing, non-slip underla y.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands or feet under theve hi-
cle.
R Never lie under theve hicle.
R Do not start theve hicle and do not release the
electric parking brake.
R Do not open or close any doors or the boot
lid. 352 352
Wheels and tyres

#
Position support 2of jack 4on jack sup-
port point 1. #
Turn ratchet 3clockwise until support 2
sits comple tely on jack support point 1and
th e base of the jack lies evenly on thegr ound. #
Turn ratchet 3until the tyre is raised a maxi-
mum of 3 cm from thegr ound. #
Loosen and remo vethe wheel (/ page 354). R
R
emo
emo ving a wheel
ving a wheel R R
eq eq uir
uir ements:
ements:
R The vehicle is raised (/ page 352).
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. When
changing a wheel, avoid applying any force
to the brake discs, as this could impair the le vel of
comfort when braking.
* N
NOOTE
TE Damage tothe wheels' plastic ele-
ments when changing a wheel Plastic elements on wheels may be damaged
when removing and repositioning the wheel. #
Do not raise the wheels bythe plastic
elements when removing and reposition-
ing. *
N
NOOTE
TE Damage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe uppermost wheel bolt com-
ple tely. #
Screw cent ring pin 1into theth re ad ins tead
of the wheel bolt. #
Unscr ewthere maining wheel bolts com-
ple tely. #
Remo vethe wheel. 354 354
Wheels and tyres

Oper
Oper
ating
ating 0uids
0uids N
No
ot
tes on oper
es on oper ating
ating0uids
0uids *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
W ARNING
ARNING Risk of injury from operating
0uids harmful toyour health
Operating 0uids may be poisonous and harm-
ful toyour health. #
Obser vethete xt on the original contain-
ers when using, storing or disposing of
operating 0uids. #
Always store operating 0uids sealed in
th eir original containers. #
Alwayske ep children away from operat-
ing 0uids. +
ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEPollution of the
environment due toirre sponsible disposal
of operating 0uids Incor
rect disposal of operating 0uids can
cause considerable damage tothe environ-
ment. #
Dispose of operating 0uids in an environ-
mentally responsible manner. Operating 0uids include
thefo llowing:
R fuels
R DeNOx agent AdBlue ®
forex haust gas aTer-
treatment
R lubricants
R coolant
R Brake 0uid
R windscreen washer 0uid
R climate cont rol system refrigerant
Only use products appro vedby Mercedes-Benz.
Damage caused bythe use of products that ha ve
not been app rove d is not co veredby the
Mercedes-Benz warranty or goodwill gestu res. The operating 0uids appr
ovedby Mercedes-Benz
can be identi/ed bythefo llowing inscriptions on
th e container:
R MB-F reigabe (e.g. MB-F reigabe 229.51)
R MB-Appr oval (e.g. MB -Appr oval 229.51)
Fu rther information on appr oved operating 0uids:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop &
W WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before and during refuelling, switch o.
th eve hicle and, if /tted, the stationary
heater. Te
ch nical data
363
363

Engine oils
for one-time /lling only in exceptional
cases:
R P Pe
etr
tr ol engines:
ol engines:
- MB-F reigabe or MB-Appr oval 229.31
AC EA C3
R Diesel engines:
Diesel engines:
- E 400 d 4MA
E 400 d 4MA TIC:
TIC:MB-F reigabe or MB-
Appro val 229.51 ACEA C3
- Allot
All other models:
her models: ACEA C3
The following values referto an oil change, includ-
ing the oil /lter.
Engine oil
Engine oil /lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
E 200 4MATIC 6.0 litres
E 220 d
E 220 d 4MATIC 6.3 litres
E 300 d 4MATIC 6.5 litres
E 400 d 4MATIC 7.5 litres Model Model
Capacity
Capacity
E 450 4MATIC 8.5 litres
All other model s6 .6 litres N
No
ot
tes on br
es on br ak
ake
e 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 363). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop. Only use a brake 0uid appr
ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant Coolant
N No
ot tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 363). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. 370
370
Te
ch nical data

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
8
Reserve fuel level *T
he fuel supply has dropped into there ser verange. #
Refuel.
! Clean the fuel filter *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the fuel /lter is dirty or thewa ter in the fuel /lter needs tobe drained. #
Consult a quali/ed specialist workshop.
¸
Replace air cleaner *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the engine air /lter is dirty and must be replaced. #
Consult a quali/ed specialist workshop. T
T
r
r ansmission
ansmission Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Only select Park (P) when
vehicle is stationary *I
t is possible toselect the park position jonly if theve hicle is stationar y. #
Depress the brake pedal tostop. Displa
y messages and warning/indicator lamps
393
393

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
ShiT the transmission topark position jwhen theve hicle is stationar y.
Apply brake to deselect
Park (P) position *Y
ou ha veattem pted toshiT the transmission out of park position jand into ano ther transmission position. #
Depress the brake pedal. #
Select transmission position h,kor neutral i.
To shift out of P or N,
depress brake and start
engine *Y
ou ha veattem pted toshiT the transmission out of park position jor neutral iand into ano ther transmission posi-
tion. #
Depress the brake pedal. #
Start theve hicle. #
Change the transmission position.
Apply brake to select D or R *You ha veattem pted toselect transmission position hork. #
Depress the brake pedal. #
Select transmission position hork.
Apply brake to select R *You ha veattem pted toselect transmission position k. #
Depress the brake pedal. #
Select transmission position k.
Risk of vehicle rolling
Driver door open and trans-
mission not in P *T
he driver's door is not fully closed and transmission position h,kor neutral iis selected.
The vehicle may rollawa y. 394 394
Display message
s andwarning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Select park position jwhen switching o. theve hicle.
N permanently active Risk
of vehicle rolling *W
hiletheve hicle is rolling or while you are driving, neutral ihas been engaged. #
Depress the brake pedal tostop. #
ShiT the transmission topark position jwhen theve hicle is stationar y. #
Tocontinue driving, select transmission position hork.
Without changing gear,
consult workshop *T
he transmission is malfunctioning. It is no lon ger possible tochange the transmission position. #
If transmission position his selected, consult a quali/ed specialist workshop and do not change the transmission
position. #
For all other transmission positions, park theve hicle safel y. #
Consult a quali/ed specialist workshop.
Reversing not poss. Con-
sult workshop *T
he transmission is malfunctioning. It is not possible toselect transmission position k. #
Consult a quali/ed specialist workshop.
Transmission Malfunction
Stop *T
he transmission is malfunctioning. The transmission shiTs toneutral iautomaticall y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Depress the brake pedal. #
Engage park position j. #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
395
395

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Stop vehicle Leave engine
running Wait Transmission
cooling *T
he transmission is overheating. Pulling away may be temp orarily impaired or not possible. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavethe engine running. #
Wait until the display message disappears before pulling away.
Auxiliary battery malfunc-
tion (white displ aymessage) *T
he auxiliary battery forth e automatic transmission is no longer being charge d. #
Consult a quali/ed specialist workshop. #
Until then, alw ays select park position jmanually before you switch o. theve hicle. #
Before leaving theve hicle, apply the electric parking brake.
Auxiliary battery malfunc-
tion (red display message) *V
Vehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: The auxiliary battery forth e transmission is no longer being charge d. #
Consult a quali/ed specialist workshop. #
V
V ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: untilthen, alw ays select park position jbefore you switch o. theve hicle. #
Before leaving theve hicle, apply the electric parking brake. 396
396
Display messages and
warning/indicator lamps