2022 MERCEDES-BENZ E-CLASS CABRIOLET sensor

Mer
Mer
cedes-Benz GenuineP
cedes-Benz GenuineP ar
arts
ts
+ ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmental
damage caused bynot using recycled
re conditioned components Mercedes‑Benz
AGo.ers recycled recondi-
tioned components and parts with the same
qu ality as new parts. The same entitlement
from the implied warranty is valid as for new
parts. #
Recycled reconditioned components and
parts from Mercedes‑Benz AG.*
N
N O
OTE
TE Impai rment of the operating e1-
ciency of there straint systems from
installing accessor y parts or fromrepairs
or we lding Airbags and seat belt
tensioners, as well as
control units and sensors forth ere straint sys-
te ms, may be ins talled in thefo llowing areas
of your vehicle:
R doors R
door pillars
R Sill
R Seats
R Cockpit
R Instrument displ ay
R Centre console
R lateral roof frame #
Do not ins tall accessory parts such as
audio systems in these areas. #
Do not car ryout repairs or welding. #
Have accessories retro/tted at a quali-
/ed specialist workshop. Yo
u could jeopardise the operating saf ety of your
ve hicle if you use parts, tyres and wheels as well
as accessories releva nt tosaf ety which ha venot
been app rove dby Mercedes-Benz. Saf ety-re leva nt
systems (e.g. the brake system) may malfunction.
Only use Mercedes-Benz GenuineParts or parts of
equal qualit y.Only use tyres, wheels and acces-
sory parts that ha vebeen speci/cally appr oved
fo ryo ur vehicle model. Mercedes-Benz
tests original pa rts and con ver-
sion parts and accessory parts that ha vebeen
speci/cally appr ovedfo ryo ur vehicle model for
th eir reliability, saf ety and suitability. Despite
ongoing mar ketre sear ch, Mercedes-Benz is
unable toassess other parts. Mercedes-Benz
th erefore accepts no responsibility forth e use of
such parts in Mercedes-Benz vehicles, even if
th ey have been o1cially appr oved or independ-
ently appr ovedby ate sting centre.
Ce rtain parts are only o1cial lyappr ovedfor
installation or modi/cation if they comply with
legal requ irements. All Mercedes-Benz Genuine-
Pa rts meet the appr oval requ irements. The use of
non-appr oved parts may in validate theve hicle's
ge neral ope rating permit.
This is the case in thefo llowing situations:
R The vehicle type is di.erent from that for
which theve hicle's general ope rating permit
wa sgr anted.
R Other road users could be endangered.
R The exhaust gas or noise le velget swo rse. General no
tes
21 21

fo
re xamp le,your driving behaviour, your location,
yo ur route or your use patterns.
Leg
Leg al r
al req
equir
uir ements r
ements r eg
egar
arding t
ding t he disclosur
he disclosur e of
e of
data
data
If legally requ ired todo so, manufacturers are, in
individual cases, legally obliged toprov ide go vern-
mental entities, upon requ est and totheex tent
re qu ired, data stored bythe manufacturer.
Fo rexamp le,this may be the case during the
in ve sti gation of a criminal o.ence.
Go vernmental entities are themsel ves, in individ-
ual cases and within the applicable legal frame-
wo rk, authorised toread out data from theve hi-
cle. In the case of an accident, information that
can help with an in vesti gation can, therefore, be
ta ke n from the airbag control unit, fore xamp le.
Oper Oper ational dat
ational dat a in t
a in the v
he vehicle
ehicle
This is data rega rding the operation of theve hicle,
which ha vebeen processed bycont rol units.
This includes thefo llowing data, fore xa mpl e:
R vehicle status information suc hasth e speed,
longitudinal acceleration, lateral acceleration,
number of wheel revo lutions or thefa stened
seat belts display R
ambient conditions, su chas temp erature, rain
sensor or distance sensor
Generall y,the use of these data is temp orar y;
th ey will not be stored be yond the period of oper-
ation and will only be processed within theve hicle
itself. Control units oTen contain data memories
fo rve hicle keys,fo re xamp le. Their use permits the
te mp orary or permanent documentation of tech ni-
cal information about theve hicle's operating
state, component loads, main tenance requ ire-
ments and tech nical events or faults.
Depending on theve hicle equipment, thefo llo w-
ing data are stored:
R operating status of system components,
suchas /ll le vels, tyre pressure or battery sta-
tus
R malfunctions or faults in impor tant system
components, suc has lights or brakes
R system reactions in special driving situations,
suchas airbag depl oyment or the inter vention
of stability cont rol systems
R information on events leading tovehicle dam-
age In cer
tain cases, it may be requ ired tostore da ta
th at wo uld ha veotherwise been used only temp o-
rari ly. This may be the case if theve hicle has
de tected a malfunction, fore xamp le.
If yo u use services, suc hasre pair services and
maintenance work, stored operational data as
we ll as theve hicle identi/cation number can be
re ad out and used. They can be read out by
service network emplo yees, suc haswo rkshops
and manu facturers or third parties, suc has break-
down services. The same is true in the case of
wa rranty claims and quality assurance measures.
In general, there adout is per form ed via the legally
prescribed port forth e diagnostics connection in
th eve hicle. The operational data that are read out
document tech nical states of theve hicle or of
individual components and assist in the diagnosis
of malfunctions, compliance with warranty obli ga-
tions and quality impr ovement. Tothat end, these
data, in particular information about component
loads, tech nical events, malfunctions and other
fa ults may be transmitted along with theve hicle
identi/cation number tothe manufacturer. Fur-
th ermore, the manufacturer is subject toproduct
liability. Forth is reason the manufacturer also General no
tes
37 37

R
R
es
estr traint syst
aint syst em functionality
em functionality When
theve hicle is switched on, a self-test is per-
fo rm ed, during which the6 restraint system
wa rning lamp lights up. It goes out no later than a
few seconds aTer theve hicle is star ted. The com-
ponents of there straint system are then func-
tional. Malfunctioning r
Malfunctioning r
es
estr traint syst
aint syst em
em A malfunction has occur
red in there straint sys-
te m if:
R the6 restraint system warning lamp does
not light up when theve hicle is switched on
R the6 restraint system warning lamp lights
up continuously or repeatedly during a journey &
W WARNING ARNING Risk of inju rydue tomalfunc-
tions in there straint system
Co mp onents in there straint system ma y be
acti vated unintentionally or not deploy as
intended in an accident. #
Have there straint system checked and
re paired immediately at a quali/ed spe-
cialist workshop. F
F
unction of t
unction of t he r
he res
estr
traint syst
aint syst em in an accident
em in an accident How
there straint system works depends on the
se verity of the impact de tected and the apparent
type of accident:
R Frontal impact
R Rear impact
R Side impact
R Rollover
The activation thre sholds forth e components of
th ere straint system are de term ined based on the
ev aluation of the sensor values measured at vari-
ous points in theve hicle. This process is pre-e mp-
tive in nature. The triggering/deployment of the
components of there straint system must take
place in good time at the start of the collision.
Fa ctors which can only be seen and measured
aTer a collision has occur red cannot play a deci- sive
role in airbag deployment. Nor do they pro-
vide an indication of airbag deployment.
The vehicle may be deformed signi/cantly without
an airbag being deplo yed. This is the case if only
parts which are relatively easily deformed are
a.ec tedand thera te of vehicle deceleration is
not high. Con versely, an airbag may be depl oyed
ev en though theve hicle su.ers only minor defor-
mation. If very rigid vehicle parts such as longitu-
dinal membe rsare hit, this may result in su1-
ciently high le vels of vehicle deceleration.
Depending on the de tected deployment situation,
th e components of there straint system can be
acti vated or deplo yed independently of each
ot her:
R Seat belt tensioner: frontal impact, rear
impact, side impact, rollo ver
R Driver's airbag, front passenger airbag: frontal
impact
R Knee airbag: frontal impact
R Side airbag: side impact
R Head airbag: side impact, rollo ver,frontal
impact Occupant sa
fety
41 41

&
W
WARNI NG
ARNI NGRisk of injury if the co ver of the
head airbag is damaged
If th e co ver of a head airbag is damaged, the
head airbag may no lon ger function as inten-
ded and may even cause additional injuries if
deplo yed. In particular, the co ver of the head
airbag can be damaged bypeople sitting on it
or by heavy objects. #
Before commencing your journe y,make
sure that the head airbag co vers are
undamaged. Ha vea damaged head air-
bag co verre placed immediately at a
qu ali/ed specialist workshop. #
Never sit on the co ver of the head air-
bag. #
Do not place heavy objects on the co ver
of the head airbag. The head airbags are integ
rated into the beltline
of the doors (/ page 47). &
W
WARNING
ARNING Risk of injury or death due to
th e use of unsuitable seat co vers
Due tounsuitable seat co vers,th e airbags
cannot pr otect vehicle occupants as intended.
In addition, the operation of the automatic
front passenger airbag shuto. could be
re stric ted. #
You should only use seat co vers that
ha ve been appr oved forth e cor respond-
ing seats byMercedes-Benz. &
W
WARNI NG
ARNI NGRisk of injury due tomalfunc-
tioning sensors in the door
The function of the airbags can be impaired
due tomodi/cations or incor rect wo rkper-
fo rm ed on the doors or door trim, or if the
doors are damaged. #
Never modify the doors or parts of the
doors. #
Always ha veworkon the doors or door
trim car ried out at a quali/ed specialist
wo rkshop. &
W
WARNING
ARNING Risk of injury due todeplo yed
airbag
A depl oyed airbag no longer o.ers any pr otec-
tion. #
Have theve hicle towe dto a quali/ed
specialist workshop in order tohave the
deplo yed airbag replaced. Ha
ve deplo yed airbags replaced immediatel y. S
S
t
tatus of t
atus of t he fr
he front passeng
ont passeng er fr
er front airbag
ont airbag F
F
unction of t
unction of t he aut
he automatic fr
omatic fr ont passeng
ont passeng er airbag
er airbag
shut
shut o.
o.
The automatic front passen ger airbag shuto. is
able todetect whe ther the front passenger seat is
occupied bya person or a child restraint system.
The front passenger airbag is enabled or disabled
acco rdingl y. 50 50
Occupant saf
ety

This does not lock or unlo
ckthe fuel /ller 0ap.
The vehicle is not unloc ked:
R ifyo u ha veloc kedth eve hicle using thekey
R ifyo u ha veloc kedth eve hicle using KEYLESS-
GO Loc
Loc
king/unloc
king/unloc king t
king the v
he vehicle wit
ehicle wit h KEYLESS-GO
h KEYLESS-GO R
R
eq
eq uir
uir ements:
ements:
R The key is outside theve hicle.
R The dis tance between theke y and theve hicle
does not exceed 1 m.
R The driver's door and the door on which the
door handle is used are closed.
* NO
NO TE
TEDamage totheve hicle caused by
unintentionally opening the boot lid R
when using an automatic car wash
R when using a high pressure cleaner #
Deactivate the function of theke y in
th ese situations.
or #
Make sure that theke y is at a minimum
dis tance of 3 m away from theve hicle. Obser
vethe no tes:
R onwashing theve hicle in a car wash
(/ page 307)
R on using a high pressure cleaner
(/ page 308) #
T To unloc
o unloc k t
k the v
he v ehicle:
ehicle: touch the inner sur face
of the door handle. #
T
To loc
o loc k t
k the v
he v ehicle:
ehicle: touch sensor sur face 1
or 2. #
Conv
Conv enience closing:
enience closing: touch recessed sensor
sur face 2 until the closing process has been
comple ted.
% Further information on con venience closing
(/ page 96).
If yo u open the boot lid from outside, the boot lid
is automatically unloc ked. Pr
Pr
oblems wit
oblems wit h KEYLESS-GO, tr
h KEYLESS-GO, tr oubleshoo
oubleshooting
ting Y
Y
ou can no long
ou can no long er loc
er lock or unloc
k or unloc k t
k the v
he v ehicle using
ehicle using
KEYLESS-GO
KEYLESS-GO
Po ssible causes:
R The function of theke y has been deactivated.
R The key battery is weak or dischar ged. #
Activate the function of theke y (/ page 77). #
Check the battery using the indicator lamp
(/ page 76). Opening and closing
81 81

th
e boot lid will not be loc ked and will pop open
again.
No tethat the boot lid will not be loc ked if thefo l-
lowing situation occurs:
R You ha veloc kedth eve hicle and close the
boot lid while a key belonging totheve hicle is
inside theve hicle.
and
R A second key belonging totheve hicle is not
de tected outside theve hicle.
Au tomatic keyre cognition is only an aid and is not
a substitute foryo ur attentiveness. #
Before locking, ensure that at least one key
belonging totheve hicle is outside theve hicle. #
T To close t
o close t he boo
he boot lid:
t lid:pullthe boot lid down-
wa rds using the handle recess and push it
closed. HANDS-FREE A
HANDS-FREE A
CCESS function
CCESS function Wi
th HANDS-FREE ACCESS you can open the
boot lid byper form ing a kicking mo vement under
th e bumper.
Obser vethe no tes when opening the boot lid
(/ page 84). &
W
WARNING
ARNING Risk of burns caused bya hot
ex haust system
The vehicle exhaust system can become very
hot. If you use HANDS-FREE ACCESS, you
could burn yourself bytouching theex haust
system. #
Always ensu rethat you only make a kic k-
ing mo vement within the de tection range
of the sensors. *
N
NOOTE
TE Damage totheve hicle caused by
unintentionally opening the boot lid R
when using an automatic car wash
R when using a high pressure cleaner #
Deacti vate the function of theke y in
th ese situations.
or #
Make sure that theke y is at a minimum
dis tance of 3 m away from theve hicle. Opening and closing
85
85

When making
the kicking mo vement, make sure
th at you are standing /rmly on thegr ound. Yo u
could otherwise lose your balance, e.g. on ice.
Obser vethefo llowing no tes:
R The key is behind theve hicle.
R Stand at least 30 cm away from theve hicle
while per form ing the kicking mo vement.
R Do not come into contact with the bumper
while making the kicking mo vement.
R Do not car ryout the kicking mo vement too
slo wly.
R The kicking mo vement must be towa rdsthe
ve hicle and back again. 1
Detection range of the sensors
If se veral consecutive kicking mo vements are not
successful, waitte n seconds.
Syst
Syst em limits
em limits
The system may be impai red or may not function
in thefo llowing cases:
R The sensors are dirty, e.g. due toroad salt or
sno w.
R The kicking mo vement is made using a pros-
th etic leg. The boot lid could be opened unintentionall
y,in
th efo llowing situations:
R A person's arms or legs are moving in the sen-
sor de tection range, e.g. when polishing the
ve hicle or picking up objects.
R Objects are mo ved or placed behind theve hi-
cle, e.g. the fuel pump hose or luggage.
R Clamping straps, tarp aulins or other co verings
are pulled overth e bumper.
R A pr otective mat with a length reaching over
th e boot sill down into the de tection range of
th e sensors is used.
R The pr otective mat is not secured cor rectl y.
R Workis being done on the trailer hitch, trailers
or rear bicycle rack s.
Deacti vate the function of theke y (/ page 77) or
do not car rytheke y about your person in such
situations. Switc
Switc
hing separ
hing separ at
ate boo
e boo t loc
t locking on or
king on or o.
o. If
yo u centrally unlock theve hicle while separate
locking is activated, the boot will remain loc ked. 86
86
Opening and closing

#
Switch on theve hicle. #
T
To open:
o open: press and hold but ton1 tothe
point of resis tance. #
T
To open full y:
o open full y:press and hold button 1
be yond the point of resis tance. #
T
To close:
o close: pull and hold button 1.
A
A ut
ut omatic rev
omatic rever
er sing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
W ARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting. The
reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
W button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply The side windo
wswill be closed as far as theve n-
tilation position rega rdless of the status of the
soT top.
If th e side windo wsare obstructed during auto-
matic closing, the side window concerned will
open again slightl y.ATer an other automatic clos-
ing process, the automatic function may be deac-
tivated. The automatic function will be active
again the next time theve hicle is star ted. Conv
Conv enience opening (v enience opening (v entilating t
entilating t he v
he vehicle
ehicle
bef
bef or
ore st
e st ar
arting a jour
ting a jour ne
ney)
y) &
W
WARNING
ARNING Risk of entrapment when open-
ing a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. #
When opening, make sure that nobody is
to uching the side windo w. #
Release the button immediately if some-
body becomes trapped. Opening and closing
95
95