2022 MAZDA MODEL MX-5 MIATA RF lights

[x] Cancel search: lights

Page 303 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual Remarks:
*1 The engine oil and filter must be changed at least once a year or within 12,000 km (7,500 miles) since last
engine oil and filter change.  Reset the engine oil data whenever repl acing the

Page 305 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual Canada residents
Maintenance IntervalNumber of months or kilometers (miles), whichever comes first.
Months 6 1218243036424854606672
×1000 km 8 1624324048566472808896
×1000 miles 5 10 15 20 25 30 35

Page 309 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual ▼Schedule 2
Maintenance Interval Number of months or kilometers, whichever comes first
Months 3 6 9 121518212427303336
×1000 km 5 1015202530354045505560
Drive belts I
Engine oil & filter RRRRRRRRRR

Page 310 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual D: Drain
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may cause serious damage to the engine and cooling system.
*2 According to state/p

Page 335 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual Light Bulbs
Overhead lightSide turn signal lights
High-mount brake light
Trunk light
Front side-marker lights
Front turn signal lights
Headlights (Low/High beam)
Parking lights
Daytime running lights

Page 336 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual CAUTION
When removing the lens or lamp unit using a flathead screwdriver, make sure that the
flathead screwdriver does not contact the int erior terminal. If the flathead screwdriver
contacts the term

Page 337 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual Front side-marker lights
1. Make sure the ignition is switched off,and the headlight switch is off.
2. If you are changing the right bulb, start the engine, turn the steering wheel all
the way to the

Page 338 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual 5. Turn the socket and bulb assemblycounterclockwise and remove it.
6. Disconnect the bulb from the socket.
 
7. Install the new bulb in the reverseorder of the removal procedure.
Side turn signal lig