2022 MAZDA MODEL MX-5 MIATA RF climate control

[x] Cancel search: climate control

Page 259 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual A/C switch
Press the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate  when the fan control
dial is in any position except OFF.
 
Press the switch once agai

Page 260 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual 4. Set the fan control dial to the desiredspeed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
If the windshield fogs up easily, set the
mode selector dial to the 
 posit

Page 261 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual The air to the floor is warmer than air
to the face (except when the temperature
control dial is set at the extreme hot or
cold position).
▼Ventilation
1. Set the mode selector dial to the 
posit

Page 262 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual ▼Dehumidifying
Operate the air conditioner in cool or cold
weather to help defog the windshield and
side windows.
1. Set the mode selector dial to the
desired position.
2. Set the air intake selecto

Page 263 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual Fully Automatic Type
Rear window defogger switch
Air intake selector switch Fan control dial
Temperature control dial
A/C switch Rear window defogger switch
Air intake selector switch
A/C switch
Mode

Page 264 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual ▼Control Switches
Temperature control dial
This dial controls temperature. Turn it
clockwise for hot and counterclockwise
for cold.
Fan control dial
The fan has seven speeds.
AUTO position
The amoun

Page 265 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual Outside air position (indicator light
turned off)
Outside air is allowed to enter the cabin.
Use this mode for ventilation or
windshield defrosting.
WA R N I N G
Do not use the  position in cold or ra

Page 266 of 503

MAZDA MODEL MX-5 MIATA RF 2022  Owners Manual WARNING
Set the temperature control to the hot or
warm position when defogging (
position):
Using the 
 position with the temperature
control set to the cold position is
dangerous as it will cause the
Page:   < prev 1-8 9-16 17-24 next >