2022 LUCID AIR warning

For an occupied rear seat, press the button
at the base of the head restraint and move
the restraint upward to at least the first locked
position. Make sure the head restraint is in a
locked position during height adjustment.
The rear center head restraint is not
adjustable, only removable.
Removing a head restraintWARNING: If the passenger

Seat Belts
Seat Belt WarningsWARNING: It is the driver

belts in use to make sure they are correctly
latched. Remove any heavy objects (such as
a briefcase) from any unoccupied seats. If the
indicator remains on, contact a Lucid Service
Center .
In addition to the seat belt reminder, a graphic
of the seat layout displays on the left side of
the Cockpit Panel. The seat layout displays the detected occupied seats and the seat beltuse status.
When the seat location displays a green
indicator, it indicates that the seat
position is occupied and the seat belt
is fastened.
When a seat location displays a red seat
belt indicator, it indicates that the seat
position is occupied but the seat belt is
not fastened.
Using Seat Belts When PregnantWARNING: Pregnant women must
wear seat belts to protect themselves
and their unborn child.WARNING: Do not place anything
between you and the seat belt to
cushion the impact in the event of a
collision.
Wear the lap portion of the seat belt as low
as possible across the hips, not the waist.
Position the shoulder part of the belt between
the breasts and to the side of the abdomen.
Make sure that the seat belt has no slack and
is not twisted.
For any concerns about wearing seat belts,
consult with your physician.
Seat Belt Pre-tensionersWARNING: If a seat belt pre-tensioner
activates, it must be replaced. After
an impact or collision, even if there is
no obvious damage, always have the
seat belts checked and (if necessary)
replaced by a Lucid Service Center.
The seat belts for the front and outboard
rear seating positions are equipped with pre )tensioners that work either independently
or in conjunction with the airbags in a severe
front or side-impact collision, depending upon
the severity of a crash.
Note: A pre-tensioner activates if the seat belt
is already buckled at the time of the collision.
The pre-tensioners automatically retract the
seat belts, reducing any slack in both the lap
and shoulder portions of the belts, thereby
reducing the forward movement of the seat
belt wearer.
The seat belt pre-tensioners can only activate
once before a Lucid Service Center must
replace them.
If a pre-tensioner activates, the
airbag warning indicator displays on
the Cockpit Panel.
Note: Even if the pre-tensioners activate, the
seat belts still function as restraints. Continue
to wear the seat belts if the vehicle remains in
a drivable condition.
Seating & Safety Restraints39

Testing Seat BeltsWARNING: Regularly check the
condition of all seat belts. Replace
seat belts if you notice damage
to the belt straps, fittings, retractor
mechanisms, or buckles. Damaged
seat belts may not operate properly in
the event of an accident.WARNING: When seat belts are not
in use, they should be fully retracted
and not hanging loose. If a seat belt does not fully retract, contact a Lucid
Service Center.
There are three tests you should perform
when checking seat belts:
1. With the seat belt fastened, give the shoulder belt strap at the buckle a quick
upward pull. The buckle should remain
securely locked.
2. With the seat belt unfastened, unreel the belt to its limit. Check that it
unreels smoothly with no snatches or
snags. Visually check the belt for wear.
Allow the belt to retract, checking that
retraction is smooth and complete.
3. With the belt half unreeled, hold the strap and quickly try to pull
more strap out. The mechanism must lock automatically and prevent further
unreeling.
If any issues arise during these tests, contact
a Lucid Service Center immediately to have
the seat belt replaced.
Seating & Safety Restraints40

Child Safety
Guidelines for Seating Children
All child restraint systems are designed to be
secured by lap belts or the lap belt portion of
the lap-shoulder belt.
WARNING: Do not use a child
restraint on a seat with an operational
airbag in front of it. There is a risk
of death or serious injury when the
airbag deploys. Crash statistics show
that children are safest when properly
restrained in a child or infant restraint
system that is secured in a rear seating position.WARNING: Do not use a forward-
facing child seat until the child using
it is above the minimum weight of 20
lb (9 kg) and able to sit up unaided.
Up to the age of two years, a child

Weight GroupRear Outer
SeatRear Center
SeatGroup II33-55 lb
(15-25 kg)U, UF-Group III48-76 lb
(22-36 kg)U, UF-
U: Universal belt rearward child restraint
system
UF: Universal belt forward child restraint
system
Weight GroupFront
Passenger
SeatRear
Outer
SeatRear
Center
SeatGroup
0Under 22 lb
(10 kg)-IL-Group
0+Under 29 lb
(13 kg)-IL-Group I20-40 lb
(9-18 kg)-IL-Group
II33-55 lb
(15-25 kg)-IL,
IUF-Group
III48-76 lb
(22-36 kg)-IL,
IUF-
IL: Any semi-universal LATCH/ISOFIX child
restraint system
IUF: Any universal LATCH/ISOFIX child
restraint system
Seating Larger Children
WARNING: Make sure the booster
seat or vehicle seat properly supports
the child

different recommended seating location
or ano
ther child safety seat.
5. If the child seat has an upper tether provided, fit and tighten the upper tether
correctly. See Attaching Upper Tether
Straps. WARNING: When the combined
w

eight of the child plus the child
restraint is more than 64 lb (29 kg),
you should not use the lower LATCH/
ISOFIX anchors with the child seats or
booster seats that have an integrated
safety belt. Use the seat belt instead.
Installing Seat Belt Retained Child Seats First, make sure that the child falls into the
corr

ect weight range for the child seat being
used. See Choosing a Child Safety Seat on
page 41.
The following is a general procedure for
installing a seat belt retained child restraint.
You should always read and follow the
instructions provided by the manufacturer of
the child safety seat you are installing. 1. Place the child safety seat in the vehicle
seat and fully e
xtend the seat belt to
engage the ALR. See Automatic Locking
Retractor (ALR). Route the seat belt to
secure the child safety seat and secure
the buckle following the manufacturer

Airbag Safety InformationWARNING: Even with airbags, the
driver and occupants must always
wear their seat belts to minimize the
risk of severe injury or death in the
event of a collision.WARNING: Do not attach or place
objects on or near the front airbags,
the side of the front seats, the
headliner at the side of the vehicle, or
any other location that could interfere
with the inflation of an airbag. Objects
can cause serious injury if the vehicle
is in a collision severe enough to
cause the airbag to deploy.WARNING: For the curtain airbags
to deploy correctly, the roof lining
and A )post trim must be undamaged
and installed correctly. Any damage
or suspect installation should be
referred to a Lucid Service Center for
inspection.WARNING: Front-seat occupants
should not place any part of their
arms, body against the steering wheel
or dashboard area, as an inflating
airbag can cause fractures or other injuries.WARNING: Do not use seat covers
in the vehicle. A seat cover could
interfere with the deployment of the
seat-mounted side airbags in the
event of a collision.WARNING: Airbags inflate with
considerable speed and force. To
reduce the risk of injuries, ensure that
all occupants are wearing seat belts
and are correctly seated, with seats
positioned as far back from any front
airbags as possible.WARNING: Never use a child safety
seat or seat young children on a seat
with an operational airbag in front of
it. Doing so can cause serious injury
or death if the airbag deploys.WARNING: To ensure correct inflation
of the side airbags, maintain
an unobstructed gap between an
occupant