2022 LUCID AIR phone

Using Alexa
Alexa Built-In
Overview
The Lucid Air comes equipped with Amazon
Alexa Built-In allowing users to give voice commands for navigating to destinations,making phone calls, sending and receiving
text messages, playing music, adjusting
temperature and controlling smart home
devices.
Authentication
To sign in to Alexa:
1. From the Pilot Panel, go to Settings > Applications > Alexa.
2. On your mobile device, go to amazon.com/code and enter in the 5-
character code or scan the QR code displayed on the Pilot Panel.
3. If you

total distance, and traffic conditions along the
route. If the route requires charging stops to reach the destination, then charging stops will
automatically be added and shown on this
screen as well.
Note: Because the Auto )add Charging
feature is enabled by default, the system
automatically calculates the battery power
needed for the trip and the recommended charging time for each charging stop.
Once the route has started, the turn-by-
turn guidance instructions are shown on the
top navigation screen. Lane guidance, exit
numbers, and other guidance details will be
displayed when appropriate. While routing, if the navigation is replaced with media or
phone, navigation instructions will remain in
view in the Center Cockpit Panel while a route
is in progress.
The MANAGE tab summarizes the stops and their specific details. The DETAILS tab lists
every turn and stop along your route.
When the system automatically adds charging stops, extra details are provided for eachstop such as estimated percent on arrival,
suggested plug type to use, suggested number
of minutes to charge for, and suggested
minimum percent to charge up to. This
information will persistently show in both the
DETAILS tab and the MANAGE tab until your
route ends.You can also tap each Waypoint on
the Route directly from the map view to see
more details.
When starting a trip, we initially show you in
the smart drawer a full list of instructions.
This list automatically minimizes after thirty
seconds, to use the full screen for viewing
your maps and route. The route will display all
of your stops and traffic conditions. The smart
drawer with the list of instructions and details
about your stops can be manually reopened.
You can add, reorder, or delete stops.
If at any point you deviate from the route,
the system will quickly and automatically
recalculate a new route and immediately give
new guidance instructions.
While routing, if you have to stop and turn
off the vehicle, and you come back and turn on the vehicle, the route will continue to be
present on the screen.
Press END or use voice commands ("Alexa,
cancel navigation") to end navigation.
The Lucid navigation system will periodically
check that predicted charge on arrival is
still correct. It checks everytime you finish
charging, everytime you reach a low state
of charge, and every fifteen minutes while
routing. If the EV routing conditions have
significantly changed and the route needs to
be refreshed, a notification will appear and
will ask you to agree to a new route.
If for some reason the EV route requires
charging, but a fast charger could not be
automatically added along the route, then
an Insufficient Charge notification will be
shown inside navigation. In this case, we
recommend that you manually search for charging. Usually, slow chargers can be found
along the route and can be used.
Note: When Routing starts, a Mute button will
appear on the top navigation screen, which
enables you to turn off the audio guidance.
Adjusting the Map
The maps on either the ICR and CID
screen can be individually rotated, panned,
or zoomed in and out via the touchscreen.
Any time the map is manipulated beyond your vehicle

Phone and Smart Devices
Bluetooth

4. Under MY DEVICES, tap the name of thedevice to be connected.
Alternately, you can use the right Cockpit Panel. Press the
icon in the status bar
to display connected devices and connect or
disconnect.
Editing Bluetooth Enabled Device Preferences
To edit device preferences:
1. On the Pilot Panel Bluetooth screen, press the three dots by a connected
device.
2. From this screen, select to allow your vehicle to access the phone, audio,
or both features. Press SAVE to keep
these settings and return to the previous
screen.
If you no longer wish to use a device with the
vehicle:
1. On the Pilot Panel Bluetooth screen, press Forget.
2. Press the FORGET button next to any device you wish to remove, then pressFORGET at the prompt to confirm.
3. Press Done when you have finished
unpairing any unwanted devices.
Using the Phone App
WARNING: Distracted driving can
lead to loss of vehicle control and
a collision, which can result in
serious injury or death. Lucid strongly
recommends that the driver stay
focused on the road at all times while
driving. Safe operation of the vehicle
is the driver

-If you take the call from your iPhone, the
call audio will depend on iPhone “Call
Audio Routing” setting.
Press an option on the touchscreen or use
the steering wheel controls to DECLINE or
ACCEPT the call.
Note: Your phone may prompt you to select
the audio output for the call, depending on
the type of phone and last output used.
The "Call Audio Routing" Setting on iPhone The "Call Audio Routing" setting can be
configured in one of three ways:
- Automatic - The iPhone routes the audio
to the phone even though the phone is connected to the car via Bluetooth.
- Bluetooth Handset - The iPhone routes
the audio to the car when the phone is
connected to the car via Bluetooth.
- Speaker - The iPhone routes the audio
to the phone speaker even though the
phone is connected to the car via
Bluetooth.
In-Call Options
Active calls are displayed on the right Cockpit Panel.
-The
active call icon will be
displayed in the status bar when a call
is in progress.
- Contact information and call length will
be displayed in the main screen, along
with call control buttons.
If a call is placed on hold and a second call is
made, the call control buttons change.
-Press Swap to switch between the active
call and the call on hold.
- Press Merge to bring both callers into a
shared call.
Call volume and the mute option can be
controlled with the physical controls in your vehicle. See Physical Media Controls on page
123.
Using MessagesWARNING: Distracted driving can
lead to loss of vehicle control and
a collision, which can result in
serious injury or death. Lucid strongly
recommends that the driver stay
focused on the road at all times while
driving. Safe operation of the vehicle
is the driver

New Vehicle Limited Warranty
Message to Customers
Welcome to the Lucid New Vehicle LimitedWarranty, and welcome to luxury electric. This
guide provides a detailed explanation of the
warranty terms for the Lucid Air, including
coverage types, durations, limitations, regions,
and more. Our goal is to provide peace of
mind and exceptional service at every step of
the Lucid Air ownership experience.
Who is the Warrantor?
Lucid USA, Inc. is the warrantor in the
United States and Lucid Motors Canada
ULC is the warrantor in Canada (collectively
"Lucid”). Lucid will provide repairs to Lucid
Airs sold by and delivered directly from Lucid
or its affiliates during the applicable warranty
periods in the specified Warranty Regions
listed below in accordance with the terms, conditions and limitations in this Lucid New
Vehicle Limited Warranty.
Warranty RegionWarrantor and Contact InformationUSALucid USA, Inc.
7373 Gateway Blvd
Newark, CA 94560
Phone: 1-888-99 LUCID
(1-888-995-8243)CanadaLucid Motors Canada ULC
Suite 2300, Bentall 5, 550
Burrard Street Vancouver BC,
V6C 2B5
Phone: 1-888-99 LUCID
(1-888-995-8243)
The Lucid New Vehicle Limited Warranty is valid only within the region for which theLucid Air was originally manufactured and
sold. Any service required under the terms of
this Lucid New Vehicle Limited Warranty will
be provided by a Lucid Service Center.
You may take your Lucid Air temporarily to any
region where there is a Lucid Service Center,
and the Lucid Warranty will be honored in that
region. Temporary is defined as a period less
than six months. Proof of compliance with
any temporary import laws or regulations is
required. If you are permanently moving to
a new region supported by a Lucid Service
Center, you may apply to Lucid to transfer the
Lucid Warranty to the region for the duration of your ownership. Requests to transfer a
vehicle